R2500_V01 CHENDA | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
DN:T19821A0 https://www.microdiode.com Rev:2019A0 Page :1 Reverse Voltage - 2500 to 5000 Volts Forward Current - 0.2 Ampere R2500 THRU R5000 Mechanical Data F eatures The plastic package c arries Underwriters Laboratory Flammability Classification 94V-0 Construction utilizes void-free molded plastic technique Low reverse leakage High forward surge current capability High temperature soldering guaranteed: 250°C/10 seconds,0.375”(9.5mm) lead length, 5 lbs. (2.3kg) tension DO-15 Dimensions in inches and (millimeters) Case : JEDEC DO-41/DO-15 Molded plastic body Terminals : Solder plated, solderable per MIL-STD-750,Method 2026 Polarity : Polarity symbol marking on body Mounting Position : Any Weight :0.012 ounce, 0.33 grams(DO-41) 0.014 ounce, 0.40 grams(DO-15) Maximum Ratings And Electrical Characteristics Ratings at 25°C ambient temperature unless otherwisespecified. Single phase half-wave 60Hz,resistive or inductive load,for capacitive load current derate by 20%. DO-41 0.140 (3.6) 0.104(2.6) DIA. 0.034 (0.86) 0.028 (0.70) DIA. 0.300(7.6) 0.230(5.8) 1.0 (25.4) MIN. 1.0 (25.4) MIN. 0.107 (2.7) 0.080 (2.0) DIA. 0.034 (0.86) 0.028 (0.70) DIA. 1.0 (25.4) MIN. 0.205 (5.2) 0.160(4.1) 1.0 (25.4) MIN. Parameter SYMBOLS R2500 R3000 R4000 R5000 UNITS Marking Code MDD R2500 MDD R3000 MDD R4000 MDD R5000 Maximum repetitive peak reverse voltage VRRM 2500 3000 4000 5000 V Maximum RMS voltage VRMS 1750 2100 2800 3500 V Maximum DC blocking voltage VDC 2500 3000 4000 5000 V Maximum average forward rectified current 0.375”(9.5mm) lead length(see fig.1) I(AV) 0.2 A Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) IFSM 30.0 A Maximum instantaneous forward voltage at 0.2A VF 2.0 4.0 5.0 V Maximum DC reverse current T A=25°C at rated DC blocking voltage T A=100°C IR 5.0 50.0 μA Typical junction capacitance (NOTE 1) CJ 15.0 pF Typical thermal resistance (NOTE 2) RθJA 50.0 °C/W Operating junction and storage temperature range TJ,TSTG -65 to +150 °C Note:1.Measured at 1MHz and applied reverse voltage of 4.0V D.C.
Rev:2019A0 Page :2 Ratings And Characteristic Curves The curve above is for reference only. https://www.microdiode.com Reverse Voltage - 2500 to 5000 Volts Forward Current - 0.2 Ampere R2500 THRU R5000 0.25 0.20 0.15 0.10 0.05 0 25 50 75 100 125 150 175 5.0 0.1 1.0 10 100 0.01 0.1 1 10 100 100 0.1 REVERSE VOLTAGE,VOLTS t,PULSE DURATION,sec. FIG. 5-TYPICAL JUNCTION CAPACITANCE FIG. 6-TYPICAL TRANSIENT THERMAL IMPEDANCE FIG. 3-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS NUMBER OF CYCLES AT 60 Hz FIG. 2-MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT FIG. 1- FORWARD CURRENT DERATING CURVE AVERAGE FORWARD RECTIFIED CURRENT, AMPERESINSTANTANEOUS FORWARD CURRENT,AMPERESJUNCTION CAPACITANCE, pF PEAK FORWARD SURGE CURRENT, AMPERES INSTANTANEOUS FORWARD VOLTAGE, VOLTS Single Phase Half Wave 60Hz Resistive or inductive Load 1 10 100 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) 0.001 0.01 0.1 TJ=25 C PULSE WIDTH=300 µs 1%DUTY CYCLE TJ=25 C 100 200 0 20 40 60 80 100 1,000 100 0.1 0.01 TJ=100 C TJ=25 C PERCENT OF PEAK REVERSE VOLTAGE,% FIG. 4-TYPICAL REVERSE CHARACTERISTICS INSTANTANEOUS REVERSE CURRENT, MICROAMPERES TRANSIENT THERMAL IMPEDANCE, C/W AMBIENT TEMPERATURE, C R2500 R3000 R4000-R5000