R2M EIC | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
VRM : 130 Volts IZSM : 1.0 Amp. ( 100 µs ) FEATURES : * 600 W surge capability at 1ms * Excellent clamping capability * Low zener impedance * Fast response time : typically less than 1.0 ps from 0 volts to BV min. * Low Leakage < 5.0 µA above 10 V. * Pb / RoHS Free MECHANICAL DATA : * Case : DO-15 Molded plastic * Epoxy : UL94V-0 rate flame retardant * Lead : Axial lead solderable per MIL-STD-202, Method 208 guaranteed * Polarity : Color band denotes cathode end * Mounting position : Any * Weight : 0.4 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25 °C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. SYMBOL VALUE UNIT Peak Power Dissipation at TP = 1 ms (Note 1) Ppk Minimum 600 W Steady State Power Dissipation at TL = 75 °C Lead Lengths 0.375" , (9.5mm) (Note 2 ) PD 5.0 W Working Peak Reverse Voltage (Stand-off Voltage) VRWM 130 V Minimum Avalanche Breakdown Voltage at IT = 1mA (Note 3) VBR(min) 135 V Maximum Avalanche Breakdown Voltage at IT = 1mA (Note 3) VBR(max) 180 V Peak Forward Surge Current, 8.3 ms Single Half Sine-Wave Superimposed on Rated Load (JEDEC Method) (Note 4) Maximum Reverse Leakage at Working Peak Reverse Voltage IR 5.0 µA Maximum Non-Repetitive Peak Reverse Surge Current IRSM 2.6 A Maximum Reverse Voltage (Clamping Voltage) at IRSM VRSM 234 V Maximum Voltage Temperature Variation of Breakdown Voltage 175 mV/°C Junction Temperature Range TJ - 65 to + 175 °C Storage Temperature Range TSTG - 65 to + 175 °C Notes : (1) Non-Repetitive Current Pulse and Surge Current Waveform , per Fig. 6 and Derated above Ta = 25°C per Fig. 1. (2) Mounted on Copper Leaf area pf 1.57 in2 (40 mm2) (3) VBR measured after IT applied for 300 µs, IT = Square Wave Pulse or equivalent. (4) 8.3 ms single half sine-wave, duty cycle = 4 pulses per Minutes maximum. Page 1 of 2 Rev. 03 : February 28, 2014 RATING IFSM 75 A DO-15 Dimensions in inches and ( millimeters ) 0.300 (7.6) 0.230 (5.8) 0.142 (3.6) 0.102 (2.6) 0.034 (0.86) 0.028 (0.71) 1.00 (25.4) MIN. 1.00 (25.4) MIN. www.eicsemi.com
RATING AND CHARACTERISTIC CURVES ( R2M ) FIG.1 - PULSE DERATING CURVE FIG.2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 0 25 50 75 100 125 150 175 200 1 2 4 6 10 20 40 60 100 AMBIENT TEMPERATURE, (°C) NUMBER OF CYCLES AT 60Hz FIG.3 - PULSE RATING CURVE FIG.4 - TYPICAL JUNCTION CAPACITANCE 0.1µs 1.0µs 10µs 100µs 1.0ms 10ms 1 2 4 6 10 20 40 60 100 200 PULSE WIDTH , (tp) REVERSE VOLTAGE , VOLTS FIG. 5 - STEADY STATE POWER DERATING FIG.6 - MAXIMUM NON-REPETITIVE PEAK REVERSE SURGE CURRENT 0 25 50 75 100 125 150 175 200 LEAD TEMPERATURE, (°C) 0 1 2 3 4 TIME , (ms) Page 2 of 2 Rev. 03 : February 28, 2014 100 PEAK PULSE DERATING IN % OF PEAK POWER OR CURRENT 100 1.0 8.3 ms Single half Sine-Wave PEAK FORWARD SURGE CURRENT, AMPERES PEAK POWER , (kW) 100 1.0 Measured @ Stand-Off Voltage Measured @ Zero Basic TJ = 25 °C STEADY STATE POWER DISSIPATION, (WATTS) 100 tr = 10 µs Peak Value (IRSM) Half Value (IRSM/2) tp
10 X 1000 Wavefrom
as defined by R.E.A. Pulse width (tp) is defined as that point where the peak current decays to 50% of IRSM Non-Repetitive Pulse Waveform Shown in Fig.6, Ta = 25°C Typical Characteristics Single Phase Half Wave 60Hz Resistive or Inductive Load CAPACITANCE, ( pF ) PEAK PULSE CURRENT - % IRSM www.eicsemi.com