R112075000 RADIALL | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 3
Technical content
TECHNICAL DATA SHEET 1 / 3 STRAIGHT PLUG CRIMP TYPE R112.075.000 CABLE 2.6/50+75 S Series : SMC Issue : 0430 B In the effort to improve our products, we reserve the right to make changes judged to be necessary. All dimensions are in mm. pn ao COMPONENTS BODY CENTER CONTACT OUTER CONTACT INSULATOR GASKET OTHERS PARTS MATERIALS BRASS BERYLLIUM COPPER PTFE BRASS PLATINGS (µm) GOLD 0.2 OVER NICKEL 2 GOLD 1.3 OVER NICKEL 2 GOLD 0.2 OVER NICKEL 2
TECHNICAL DATA SHEET 2 / 3 STRAIGHT PLUG CRIMP TYPE R112.075.000 CABLE 2.6/50+75 S Series : SMC Issue : 0430 B In the effort to improve our products, we reserve the right to make changes judged to be necessary. PACKAGING Standard Unit Other 1 - Contact us
ELECTRICAL CHARACTERISTICS
Impedance 50 Ω Frequency 0-10 GHz VSWR 1.20 + 0.040 x F(GHz) Maxi Insertion loss 0.125 √F(GHz) dB Maxi RF leakage - ( 62 - F(GHz)) dB Maxi Voltage rating 335 Veff Maxi Dielectric withstanding voltage 1000 Veff mini Insulation resistance 1000 MΩ mini MECHANICAL CHARACTERISTICS Center contact retention Axial force – Mating end 10 N mini Axial force – Opposite end 10 N mini Torque NA N.cm mini Recommended torque Mating 30 N.cm Panel nut NA N.cm Clamp nut 70 N.cm A/F clamp nut 5.000 mm Mating life 500 Cycles mini Weight 0.000 g ENVIRONMENTAL Operating temperature -65/+165 ° C Hermetic seal NA Atm.cm3/s Panel leakage NA SPECIFICATION CABLE ASSEMBLY Stripping abcdef Assembly instruction : Recommended cable(s) RG 179 KX 22A RG 187 RG 188 RG 316 Characteristics indicated on this data sheet are those that can be achieved with the highest performance cable. Intrinsic limitations of the cable may diminish the performance of the assembly Cable retention - pull off 110 N mini - torque NA N.cm TOOLING Part Number Description Hexagon .. . R282.211.000 CRIMPING TOOL 3.25 R282.235.003 CRIMPING DIES 3.25 R282.293.000 CRIMPING TOOL - OTHERS CHARACTERISTICS
TECHNICAL DATA SHEET 3 / 3 STRAIGHT PLUG CRIMP TYPE R112.075.000 CABLE 2.6/50+75 S Series : SMC Issue : 0430 B In the effort to improve our products, we reserve the right to make changes judged to be necessary. Slide the sleeve over the ferrule and heatshrink it in place (option). Slide the centre contact on until it bottoms against the insulator back nut. Solder or crimp the contact ( see connector TDS ). 1 4 2 5 Fan the braid. Slide the cable into the back nut. Screw the back nut into the connector body with the adapted wrench. Recommended coupling torque 63 to 70 N cm. Slide the ferrule over the braid. Crimp the ferrule with crimping tool ( see connector TDS ). e a c b COMPONENTS Back nut BodyFerrule Centre contact Heatshrink sleeve (option) Insulator Slide the heatshrink sleeve onto the cable (Option). Slide the ferrule onto the cable. Position the ferrule’s hole at the front if soldering. Position the ferrule’s hole at the back if crimping. Strip the cable.