R213

R213238007W ETC2 | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 23

Technical content

Datasheet sections

www.radiall.com 4-4 SMP-MAX Receptacle IMP SMP-MAX Adapter MMBX/MCX INTRODUCTION The Best Systems Radiall’s engineers work with your engineers allowing us to develop the best competitively priced misalignment RF coaxial interconnect solutions on the market today. The Best Choices Radiall offers more board 2 board choices with four different product groups and ten connector series that can address the most demanding wireless telecom applications required for the new generation of infrastructure compact equipment. From base stations to repeaters and even handheld and GPS devices, we have a tailored connector solution for you; including the new SMP-MAX, SMP-Spring, IMP-Spring and other large, limited and no misalignment solutions. SMP-MAX Get the best for less with the new SMP-MAX large misalignment solution. Its patented impedance matching insulator is optimized for a larger operating gap between connectors making it easier for engineers to handle a board 2 board distance tolerance of at least .078” (2.0 mm) without a spring, which is 300% more than the standard SMP! It features a 3° minimum tilt (radial travel) and it has an operating frequency range of DC-6 GHz and a 1.2 max VSWR guaranteed at DC-3 GHz. Spring-loaded Connectors Radiall’s one connector IMP-Spring and three connector SMP-Spring and MMBX- Spring large misalignment spring-loaded series are the best for increased maximum distance tolerances. IMP-Spring is a cost effective unique one connector solution that offers up to .023" (.6 mm) board 2 board distance tolerance with a tilt (radial travel) up to 4.5°. The new SMP-Spring and MMBX-Spring offer up to .078” (2 mm) board 2 board distance tolerance and a 4.5° tilt (radial travel). All spring-loaded solutions feature consistent VSWR and low RF leakage. Limited Misalignment Radiall’s one connector IMP and three connector SMP and MMBX limited misalignment series are designed for applications requiring relatively precise distance tolerance of up to .023" (.6 mm) with a tilt (radial travel) of up to 4.5°. No Misalignment Radiall’s MMT, MMS and MCX series are designed for applications requiring little or no distance tolerance between boards. IMP-Spring and SMP-Spring BOARD TO BOARD SOLUTIONS

www.radiall.com 4-5 MMBX/MCX INTRODUCTION Misalignment tolerances Dimensions Performance Family Series Angle tolerance (example with a 10mm distance between boards Board to board distance tolerance Board to board minimum distance PCB surface / size Maximum frequency Typical VSWR (min/max) at 3 GHz Power at 3 GHz at 25°C No misalignment MMT 0 0 6.4 mm 4.2 X 4.9 / 25 mm 2 8 GHz 1,5 80W MMS 0 0 7.65 mm 4.2 X 5.1 / 21 mm 2 6 GHz 1,5 80W MCX 0 0 7.95 mm 6 X 6 / 36 mm 2 6 GHz 1,25 120W Limited misalignment IMP 0 0.4 mm 2 mm 4.5 X 4.5 / 20 mm 2 6 GHz 1,25 50 W MMBX 4.5°/0.7mm Max 0.6 mm 6.7 mm 4 X 4 / 16 mm 2 6 GHz 1,15 150 W Large misalignment Spring loaded IMP-Spring Not specified 1.2 mm 8.1 mm Ø 7 / 38 mm 2 18 GHz 1,2 150 W IMP-Spring 1 ° / 1 mm Max 2.0 mm 16 mm Ø 7 / 38 mm 2 6 GHz 1,15 150 W MMBX-Spring 4.5°/0.7mm Max 1.6 mm 18 mm 6 X 6 / 36 mm 2 6 GHz 1,18 150 W Large misalignment cost effective SMP-Max 3°/1mm Min 2.0 mm Min 13 mm 5.6 X 5.6 / 31 mm 2 6 GHz 1,2 300 W at 2.7 GHz

www.radiall.com 4-6

• Space saving Its small space requirement is a main advantage for applications such as board to board connections as the height is only 7 mm. MMBX INTRODUCTION
• Series Range Receptacles and in-series adapters can be either sold separately or with the in-series adapter already inserted in the receptacle. In this case, assembly time will be reduced and you will be sure that the in-series adapter is properly inserted, as it has to be assembled perpendicularly to the receptacle. Retention between receptacle and in-series adapter is ensured by the design of the adapter. - Slide-on/Snap-on: for board to board application, all in-series adapters remain on the same side during disconnection. - Slide-on/Slide-on In addition of PCB connectors and in-series adapters, Radiall offers you a wide range of products like straight plugs, right angle plugs and between-series adapters. Separately Slide-on Snap-on or Slide-on Assembled GENERAL
• Snap-on mating
• Microminiature coaxial connectors
• Robust
• Surface mount receptacles Fully compatible with automated pick and place machines

APPLICATIONS

• Board to board applications
• Base station
• High density packaging The MMBXTM connector series is particularly suitable for board to board connection in new generation telecommunication systems. MMBXTM connectors allow a quick connection in a minimum space requirement. Frequency range is DC to 12.4 GHz. SMT connectors are totally compatible with pick and place machines. 50Ω DC - 12.4 GHz

www.radiall.com 4-7 MMBX INTERFACE

1 Slotted and flared to meet electrical and mechanical requirements

2 Dimension to meet electrical and mechanical requirements

min. max. min. max. B 3.68 3.71 .145 .146 C 2.25 2.30 .088 .090 D 0.98 1.01 .038 .040 G 1.80 .071 H 1.55 1.75 .061 .069 I 0.90 .035 Letter mm inch T 3.70 nom. .146 nom. U 0.95 nom. .037 nom. V 0.70 nom. .027 nom. Letter mm inch W 3.65 nom. .144 nom. X 2.05 nom. .080 nom. Z 0.80 nom. .031 nom. Letter mm inch min. max. min. max. L 0 0 M 1.45 .057

www.radiall.com 4-8 MMBX CHARACTERISTICS Standard packaging = 100 pieces. All dimensions are given in mm.

ELECTRICAL CHARACTERISTICS

Impedance 50Ω Frequency range DC - 12.4 GHz Typical V.S.W.R. straight connectors: 2/50/S 2.6/50/S 2.6/50/D right angle connectors: 2/50/S 2.6/50/S 2.6/50/D DC - 1 GHz 1.05 1.05 1.05 1.05 1.05 1.05 1 - 2.5 GHz 1.06 1.06 1.06 1.13 1.06 1.06 2.5 - 6 GHz 1.10 1.10 1.10 1.22 1.17 1.13 Insulation resistance › 1 GΩ Dielectric withstanding voltage (sea level) 2.50 2.6/50 4.4.5 500 Vrms. 50 Hz 750 Vrms. 50 Hz Contact resistance center contact outer contact 4.4.2 4.4.3 ≤ 5 mΩ ≤ 1 mΩ MECHANICAL CHARACTERISTICS Mechanical endurance 4.7.1 100 matings Engagement and separation force Engagement Separation 4.5.4 30 N max 8-30 N Contact captivation 4.5.2 ≥ 10 N Cable retention force 2/50 2.6/50 58 N 110 N Vibration 4.6.3 - IEC 68-2-6 Fc MIL-STD-202, Method 204 D, condition A ENVIRONMENTAL CHARACTERISTICS Temperature range -55°C + 155°C Thermal shock 4.6.7 - IEC 68-2-14 Na MIL STD 202, method 107G, condition B1 Moisture resistance 4.6.6 - IEC 68-2-3 Ca MIL STD 202, method 106F Corrosion 4.6.10 - IEC 68-2-11 Ka MIL STD 202, method 101, condition B Vibration 4.6.3 - IEC 68-2-6 Fc MIL STD 202, method 204D, condition A MATERIALS Center & outer contacts Beryllium copper Bodies Brass Ferrules Copper Insulators PTFE PLATING Center & outer contacts Gold/NPGR Bodies NPGR Ferrules NPGR Test/characteristics CECC 22000 Values/remarks

To download data sheets and assembly instructions, visit www.radiall.com & enter the part number in the Search box. Bold part numbers represent products typically in stock & available for immediate shipment. See page 8 and 9 for packaging information. STRAIGHT PLUGS (male center contact) RIGHT ANGLE PLUGS (male center contact) STRAIGHT PCB RECEPTACLES (male center contact) Cable group Cable group dia. Part number Fig. A Captive center contact Note RG178/RG196 2/50/S R223 081 000 1 14.3 yes Crimp type for flexible cablesRG174/RG316 2.6/50/S R223 082 000 1 14.5RG316 2.6/50/D R223 083 000 1 RG405 .085" R223 062 000 2 Solder type for semi-rigid cables Cable group Cable group dia. Part number Fig. A Captive center contact Note RG178/RG196 2/50/S R223 181 000 1 yes Crimp type for flexible cablesRG174/RG316 2.6/50/S R223 182 000 1 RG316 2.6/50/D R223 183 000 1 RG405 .085" R223 162 000 2 2.275 Solder type for semi-rigid cables Fig. 1 Fig. 1 Fig. 2 Fig. 2  A Fig. 1 Fig. 2 Part number Fig. Captive center contact PCB Assembly instructions Packaging Note R223 434 000 1 yes M01 bulk 100 pieces SMTR223 434 800 1 tape & reel 720 pieces R223 435 000 2 P01 bulk 100 pieces

Fig. 1 Fig. 3 Part number Fig. Captive center contact PCB Assembly instructions Packaging Note R223 424 000 1 yes M01 bulk 100 pieces SMTR223 424 800 1 tape & reel 720 pieces R223 425 000 2 P01 bulk 100 pieces R223 425 110 3 P01 bulk 100 pieces EDGE CARD PCB RECEPTACLES (female center contact) STRAIGHT PCB RECEPTACLES (female center contact) SCREW-ON RECEPTACLE (female center contact) MMBX PCB RECEPTACLES Part number Fig. Captive center contact Packaging Note R223 423 000 1 yes bulk 100 pieces SMT edge cardR223 423 010 2 Fig. 1 Fig. 2 Part number Captive center contact Panel drilling R223 555 000 yes P03 To download data sheets and assembly instructions, visit www.radiall.com & enter the part number in the Search box. Bold part numbers represent products typically in stock & available for immediate shipment. See page 8 and 9 for packaging information. Fig. 2

Fig. 1 Fig. 3 Fig. 2 Fig. 4 Part number Length A (mm) Nominal board to board R223 703 000 4.8 interface: snap-slide 6.7 R223 703 080 7.1 interface: slide-slide 9 Part number Fig. Series Packaging R191 389 100 1 MMBX male/SMA male unitR191 389 200 2 MMBX male/SMA female R191 389 300 3 MMBX female/SMA male R191 389 400 4 MMBX female/SMA female Part number Series Panel drilling R223 720 020 MMBX male/MMBX male P02 IN SERIES ADAPTERS (male-male center contact) IN SERIES BULKHEAD ADAPTERS (male-male center contact) BETWEEN-SERIES ADAPTERS Other length can be designed upon request: minimum board to board height is 6.7 mm. To download data sheets and assembly instructions, visit www.radiall.com & enter the part number in the Search box. Bold part numbers represent products typically in stock & available for immediate shipment. See page 8 and 9 for packaging information.

R223 990 000 2 SMT receptacles R223 991 000 2 SMT receptacles with adapters Part number Note R223 424 800 including 750 receptaclesR223 434 800 mm inch maxi mini maxi mini A 1.4 1.2 .055 .047 B 5.16 5 .203 .197 mm inch maxi mini maxi mini A 7.27 7.13 .283 .281 P01 Threading ØA M7 x 0.75 P03P02 A VIEW The tape is delivered on reels of 330 mm diameter To download data sheets and assembly instructions, visit www.radiall.com & enter the part number in the Search box. Bold part numbers represent products typically in stock & available for immediate shipment. See page 8 and 9 for packaging information.

www.radiall.com 4-13 MMBX ASSEMBLY INSTRUCTIONS Part number R223 424 000 R223 424 800 R223 434 000 R223 434 800 M01 COPLANAR LINE Pattern and signal are on the same side. The material of PCB is epoxy resin (FR4) (Er = 4.6). The solder resist should be printed except for the land pattern on the PCB. APPLICATION 75Ω WITH B = 0.55 mm APPLICATION 50Ω WITH B = 1.2 mm PCB thickness (mm) Coplanar line A (mm) 0.8 1.0 1.2 1.6 0.350 0.360 0.365 0.375 PCB thickness (mm) Coplanar line A (mm) 0.8 1.0 1.2 1.6 0.190 0.200 0.205 0.210

www.radiall.com 4-14 MCX INTRODUCTION INTERFACE PLUG JACK ITEM mm inch min. max. min. max. 1 4.15 - .163 2 2.80 3.20 .110 .126 3 2.80 .110 5 0 0.30 0 .012 6 0.15 .006 7 1.20 .047 A 3.40 .134 B 3.05 nom. .120 nom. C 3.00 .118 E 0.25 .010 F 0.48 0.53 .019 .021 G 2.00 .079 H 3.60 .142 J 3.80 .150 ITEM mm inch min. max. min. max. 1 4.00 4.12 .157 .162 2 2.60 2.80 .102 .110 3 2.30 2.80 .090 .110 4 0.75 0.85 .029 .033 5 0 0 a 18° 22° 18° 22° ß 43° 47° 43° 47° A 3.80 .150 B 3.42 3.48 .135 .137 C 1.98 .078 F 3.00 .118 G 3.05 nom. 3.05 nom. H 3.60 3.75 .142 .148 The MCX series utilizes the SMB series electrical line and features a particularly simple, compact and robust interface. The MCX series is 30 % smaller than the SMB. The MCX series helps to miniaturize equipment. It lowers wiring connection costs through its full crimp and solder crimp versions as the centre contact of the straight models can be either crimped or soldered. It optimizes PCB layouts with its range of models for PCBs including surface mount and press-fit receptacles. GENERAL

• Subminiature coaxial connectors
• "Push-pull" snap-on mating
• Complies with specification CECC 22220
• CEI standard 1169-36

50Ω models

• Wireless communications
• Civil and military radio-telecommunication equipment Ω models
• Videocommunication
• Television broadcasting 50Ω - 75Ω DC - 6 GHz

www.radiall.com 4-15 MCX CHARACTERISTICS Impedance 50Ω and 75 Ω Frequency range DC - 6 GHz T ypical V.S.W.R. straight styles: . 085 2.6/50/S right angle styles: 085 2.6/50/S

1 GHz

1.04 1.06 1.03 1.04

2.5 GHz

1.08 1.09 1.06 1.07

6 GHz

1.13 1.12 1.10 1.10 Insulation resistance 1 000 MΩ Contact resistance (mΩ) center contact outer contact Initial ≤ 5 ≤ 2.5 After environment ≤ 15 ≤ 7.5 V oltage rating (V.R.M.R.)

• Cable RG 196/U - RG 188A/U - .047"
•  2.6 double screen
• RG 405/U - .085 At sea level

170 V rms max

335 V rms max

250 V rms max

At 70.000 Ft

45 V rms max

85 V rms max

65 V rms max

Dielectric withstanding voltage

• Cable RG 196/U - RG 188A/U - .047"
•  2.6 double screen
• RG 405/U - .085 At sea level

500 V rms max

750 V rms max

At 70.000 Ft

100 V rms max

Power P = 120W at 1.8 GHz, T = 40°C at sea level, VSWR = 1.1 for a straight plug MCX for  2.6/50/D cable MECHANICAL CHARACTERISTICS Mechanical endurance 500 matings Engagement Separation force ≤ 14.2 lbs - 63 N max ≥ 1.8 Lbs - 8N ≤ 4.5 lbs 20 N Cable retention force RG 196A/U RG 188A/U  2.6/50 Ω double screen .047" RG 405/U-.085 ≥ 7.2 lbs - 32 N ≥ 11.9 lbs - 53 N ≥ 24.1 lbs - 107 N ≥ 9.7 lbs - 43 N ≥ 34.9 lbs - 155 N Contact captivation Axial force 2.25 Lbs 10 N ENVIRONMENTAL CHARACTERISTICS Operating temperature -55°C +155°C Temperature cycling CECC 22220 paragraph 4-6-5 Thermal shock CECC 22220 paragraph 4-6-7 MIL STD 202 - method 107 condition C High temperature test CECC 22220 paragraph 4-7-2 MIL STD 202 - method 108A condition D Corrosion (salt spray) CECC 22220 paragraph 4-6-10 MIL STD 202 - method 101 condition B Vibration CECC 22220 paragraph 4-6-3 MIL STD 202 - method 204 condition D MATERIALS AND PLATING Materials Platings Bodies and male contacts Brass Gold/BBR (bodies) Female center contacts Beryllium copper Gold Ferrules Brass Insulators PTFE Test/characteristics Values/remarks Standard packaging = 100 pieces. All dimensions are given in mm.

www.radiall.com 4-16 ECO MCX CHARACTERISTICS Impedance 50Ω Frequency range DC - 6 GHz Typical V.S.W.R. straight connectors right angle connectors 1.3 1.35 Mating cycles 100 Temperature range -40°C to +85°C MATERIALS Connector body Brass Insulator PTFE Female center contact Bronze/Beryllium copper Male center contact Brass Outer contact Brass PLATING AND PACKAGING Body Gold Center contact Gold Outer contact Gold Female Nickel Packaging/MOQ 100 pieces bulk/MOQ 1000 pieces 500 pieces reel/MOQ 1000 pieces unit packaging/MOQ 100 pieces Test/characteristics Values/remarks

STRAIGHT PLUGS, FULL CRIMP TYPE, FOR FLEXIBLE CABLES STRAIGHT PLUGS, SOLDER TYPE, FOR SEMI-RIGID CABLES RIGHT ANGLE PLUGS, CRIMP TYPE, FOR FLEXIBLE CABLES (captive center contact) Cable group Cable group dia. Part number Imp. ( Ω ) Dimensions (mm) Captive center contact FinishA B C D RG178/RG196 2/50/S R113 081 000 16.1 2.55 1.1 no Gold RG174/RG316 2.6/50/S R113 082 000 16.1 2.95 1.65 yes Gold R113A 082 000 18.7 - 1.55 Gold ECO version RD316 2.6/50/D R113 083 000 16.2 3.25 1.65 Gold R113A 083 000 18.7 - 1.55 Gold ECO version Cable group Cable group dia. Part number Fig. Imp. ( Ω ) Dimensions (mm) FinishA B C D RG178/RG196 2/50/S R113 181 000 1 50 8.6 11.9 2.55 1.1 Gold RG174/RG316 2.6/50/S R113 182 000 11.9 2.95 1.65 Gold R113A 182 000 8.9 14.1 1.55 Gold ECO version R113A 183 000 8.9 14.1 1.55 Gold ECO version Cable group Cable group dia. Part number Imp. ( Ω ) Dimensions (mm) Captive center contact FinishA B C Fig. 1 Fig. 2 To download data sheets and assembly instructions, visit www.radiall.com & enter the part number in the Search box. Bold part numbers represent products typically in stock & available for immediate shipment. See page 8 and 9 for packaging information.

RIGHT ANGLE PLUGS, SOLDER TYPE (captive center contact) STRAIGHT JACKS, FULL CRIMP TYPE, FOR FLEXIBLE CABLES STRAIGHT BULKHEAD JACKS, FULL CRIMP TYPE, FOR FLEXIBLE CABLES Cable group Cable group dia. Part number Imp. (Ω) Dimensions (mm) FinishA B C D .047" semi-rigid .047" R113 151 000 50 8.6 7 2.1 1.25 GoldRG405 .085" R113 153 000 3.1 2.25 RG178/RG174/RG405 2/50/S - 2.6/50/S - .085"R113 161 000 8 8 3.0 2.35 Cable group Cable group dia. Part number Imp. (Ω) Dimensions (mm) Captive center contact Panel drilling FinishA B C Cable group Cable group dia. Part number Fig. Imp. (Ω) Dimensions (mm) Captive center contact Panel drilling FinishA B yesRG179 2.6/75/S R213 238 007 2 75 2.95 1.7 P01 BBR (Snap mount Panel thickness 2.5 ) Fig. 1 Fig. 2 -0.1 To download data sheets and assembly instructions, visit www.radiall.com & enter the part number in the Search box. Bold part numbers represent products typically in stock & available for immediate shipment. See page 8 and 9 for packaging information.

Part number Imp. (Ω) Dimensions (mm) Panel drilling FinishA B C R113 425 000 50 9.65 4.1 0.98 P05 Gold STRAIGHT MALE PCB RECEPTACLES (captive center contact) Part number Fig. Imp. (Ω) Dimensions (mm) Panel drilling Finish NoteA B R113 402 220 1 50 8.7 4.8 P03 BBR Press-in mount R113 553 000 2 8.65 2.5 P02 Gold Recessed front mount Fig. 1 Fig. 2 Part number Fig. Imp. (Ω) Dimensions (mm) Assembly instructions Panel drilling Finish NoteA B C R113 423 000 1 6.9 1.4 0.5 M01 Gold SMT/Edge-card R113 424 000 2 5.9 4.7 0.96 SMT R113 424 010 SMT/reel 100 pieces R113 424 020 SMT/reel 500 pieces R113A 424 020 1.00 P05 SMT/reel 500 pieces ECO version R113 426 000 3 10 4.1 0.98R113A 426 000 100 pieces ECO version R113 426 020 BBR R113 427 000 4 9 3 0.5 P06 Gold Space saving on PCB R213 426 000 3 75 10 4.1 0.71 P05 Gold R213 424 800 5 M01 Gold SMT/reel 100 pieces STRAIGHT FEMALE PCB RECEPTACLES (captive center contact) To download data sheets and assembly instructions, visit www.radiall.com & enter the part number in the Search box. Bold part numbers represent products typically in stock & available for immediate shipment. See page 8 and 9 for packaging information. STRAIGHT FEMALE PANEL RECEPTACLES (captive center contact)

Part number Fig. Imp. ( Ω ) Dimensions (mm) Assembly instructions Panel drilling Finish NoteA B C D E R113 661 000 1 10 10 7 3.5 P04 Gold Press-fit PCB mount R113 664 000 2 6.5 9.5 6 0.96 M01 SMT R113A 664 120 SMT/reel 500 pieces R113 665 000 3 10.5 4 P05R113 665 020 BBR R113 666 000 4 9 9.4 3 0.5 P06 Gold Space saving pattern R213 664 800 2 75 6.5 9.5 6 0.83 M01 SMT/reel 100 pieces R213 665 000 3 10.5 4 0.83 P05 MCX RECEPTACLES AND IN SERIES ADAPTERS Fig. 1 Fig. 3Fig. 2 Fig. 4 RIGHT ANGLE FEMALE PCB RECEPTACLES (captive center contact) IN SERIES ADAPTERS (female - female) Part number Imp. ( Ω ) Finish R113 704 000 50 Gold To download data sheets and assembly instructions, visit www.radiall.com & enter the part number in the Search box. Bold part numbers represent products typically in stock & available for immediate shipment. See page 8 and 9 for packaging information.

www.radiall.com 4-21 MCX PANEL DRILLING PACKAGING P01 P04 P07 P02 P05 P03 P06

www.radiall.com 4-22 MCX ASSEMBLY INSTRUCTIONS M01 COPLANAR LINE Pattern and signal are on the same side. Thickness of PCB: .063 (1.6 mm). The material of PCB is the epoxy resin of glass fabrics bacs (Er = 4.8). The solder resist should be printed VIDEO SHADOW Vaccum nozzle dimensions MCX 50Ω MCX 75Ω Part number R113 423 000 Part number a b c R113 424 000 R113 424 010 R113 424 020 R113A 424 020 R113 664 000 Ø 1.7 1.2 0.21 R113A 664 120 Ø 1.05 1.2 0.21 R213 424 800 Ø 1.57 1 0.63 Part number R113 423 000 Part number R113 424 000 R113 424 020 R113 424 010 R113A 424 020 R213 424 800 Part number R113 664 000 R213 664 800 R113A 664 120 +0.1 +0.1

COAXIAL, RF & MICROWAVE

2011 COMPANY PROFILE

Simply Your Best Connection Radiall is a global leader in the design, development and manufacturing of leading edge interconnect solutions. Dedicated to understanding its customers’ needs since 1952, Radiall has earned the reputation of being “the best of the best” in engineering ingenuity by providing a constant flow of creative system solutions serving the telecommunications, aerospace, defense, instrumentation, automotive, industrial, medical and broadcast markets. The Best End-to-End Interconnect Solutions We offer an extensive range of solutions that supports the most demanding signal transmission applications. 4G wireless infrastructure, active array radars, IED’s detection, electrical wiring in aircrafts, soldier tactical radios, in-vehicle communications networks, and magnetic resonance imaging systems are just a few of the complex applications that we support. Best Value-added Services

• Collaboration: We work closely with your engineers to understand your business, your technical needs, and your budgetary issues;
• Wide Product Range: We manage our product lines thru the entire lifecycle in order to offer you a wide selection of standard products at an affordable cost;
• Custom Products: We can tailor products to specific equipment and application needs;
• Global Presence: We’re everywhere you need us, with worldwide sales, engineering support, R&D in North America, Europe, and Asia, and manufacturing facilities strategically located in the United States, Mexico, France, India, and China;
• Responsive Support and Service: From the design stage, planning to post-installation support, we’re with you at every step, whether you need sales support or engineering expertise;
• On-time Delivery: We support your logistical needs so you get the products when and where you need them;
• Warranty: We proudly stand behind our products. Certifications and Environmental Radiall is ISO 9001: 2008 certified and dedicated to continuous improvement programs that have resulted in also being AS9100, TS16949 and ISO 14001 certified. In addition, Radiall is committed to investing in its people, future technologies and the environment, such as being RoHS (Restriction of Hazardous Substances) and REACH (Registration, Evaluation, Authorization and Restriction of Chemical substances) compliant.
• RF coaxial connectors
• Fiber optic connectors and transceivers
• Coaxial and fiber optic cable assemblies and harnesses
• High frequency microwave components
• Coaxial switches, including the smallest and most reliable SPDT relay
• Multipin rectangular connectors
• Rack and panel connectors
• Antennas for tactical networks, aerospace and instrumentation Technical information and sales contacts are available at : www.radiall.com www.radiall.com COAXIAL, RF & MICROWAVE Full Line Catalog www.radiall.com Cable designation Cable Group  / Ω Imp. Ω Cable dimensions mm (inch) Radiall cable if applicable Core type Core  Insulator  Screen Outer  P/N Remark Flexible cable BT approved Semi rigid cables MIL-C-17 standard Hand-formable cable Corrugated cables (with helical or ringed/annular copper tube) Note: S = single braid. D = dual braid. For more information about cables manufactured by Radiall, please consult our online catalog. www.radiall.com D1C004XE - 2010 November Edition AEROspace AUTOMOTIVE DEFENSE INDUSTRIAL INSTRUMENTATION SPACE TELECOMMEDICAL India - RADIALL India Pvt. Ltd S.A. PointVirgule +33 3 44 23 48 48