R1206 NIKKOHM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 3

Technical content

1/4W, 1/2W, 1W, 2W Thin Film Precision Chip R1206, R1210, R2010, R2512, R3020 D i m e n s i o n a l S p e c i f i c a t i o n s ( m m ) M a t e r i a l s

Ordering Information

Type TCR Resistance Tolerance Packaging R1206 Z 1002 A Z01 R1206 Z (5ppm/degC) 1022 A (0.05%) Z00 (Bulk) R1210 E96 Z01 (Tape) R2010 R2512 R3010 Features and Applications Thin film precision chip resistor, 2.5ppm/deg C TC and 0.05% tolerance is standard. Ni-Cr alloy thin film resistor, which is made by the advanced Nikkohm pr ocess deposited on alumina ceramic substrate and offer the features of long term stability and very low TC. Applications: Industrial measurement, control electronics and automatic test equipment. R1206-0.25W R1210-0.25W R201 0-0.5W R2512-1W R3020-2W RoHS Nikkohm Co., Ltd. 3-31-2640 Minamicho, Misawa, Aomori 033-0036 Japan TEL: +81-176-53-2105, FAX: +81-176-53-2106 D A D E E B C 2610

1 Terminal, Cu-Ni-Sn

2 Resistive, Ni-Cr thin film

3 Protection coat, Epoxy

4 Substrate, ALO ceramics

1/4W, 1/2W, 1W, 2W Precision Chip R1206, R1210, R2010, R2512, R3020 Resistance Value, E24+ & E96+ TCR and Tolerance Identifications TCR Tolerance TCR Symbols Tolerance Symbols +/- 5ppm/C Z +/- 0.05% A Specifications R1206 R1210 R2010 R2512 R3020 Resistance 25-50Kohm 25-50Kohm 1-100kohm 1-100Kohm 1-100Kohm TCR +/-5ppm(Z) +/-5ppm(Z) +/- 5ppm(Z) +/-5ppm(Z) +/-5ppm(Z) Resistance Value E96, E24 E96, E 24 E96, E24 E96, E24 E96, E24 Rating Powers 0.25W 0.25W 0.5W 1.0W 2W Max. Working Voltages Less than 50V DC or RPE ⋅= Max, Working Current Less than 500mA or )/( 2 RII = Operating Temp. -25 deg C to +120 deg C Storage Temp. -25 deg C to +120 deg C Performances R1206, R1210, R2010, R2512, R3020 条 件Conditions Short Time Overload +/- 0.05% 2.5 ti mes rated power, 5seconds, one time Insulating Voltage +/- 0.01% Withstanding Voltage +/- 0.01% Heat Shock +/- 0.05% Vibration +/- 0.01% Soldering Heat +/- 0.05% 260 degree deg C, 10+/-1seconds. Solder ability 90% Solvent None Terminal Strength +/- 0.05% Humidity +/- 0.05% 40C, 90-95RH, DC0.1W, 1000hours Load Life +/- 0.05% 70 deg C, Rated Power, 90min ON, 30min OFF, 1000hours Thermal EMF --- PCT +/-0.05% 100H, Typical Long Term Stability +/-50ppm/year Room Temperature, Typical Power Derating RoHS Nikkohm Co., Ltd. 3-31-2640 Minamicho, Misawa, Aomori 033-0036 Japan TEL: +81-176-53-2105, FAX: +81-176-53-2106 -55 0 50 100 150 200 Ambient Temperature (deg C) 100 % Rated Power 120 deg C 70 deg C Note 1. Since a special resistor structure is used in the resistance of 10 ohms or less, the label marking method may differ from the case of other resistance. 2. The performance of an short time overload test is the specification about one time overload test. Please do not apply the continuous pulse exceeding rated power. 3. When you apply continuous pulse, please care not to exceed the range of a derating curve and not to exceed maximum working voltage and maximum working current.

1/4W, 1/2W, 1W, 2W Precision Chip R1206, R1210, R2010, R2512, R3020 Frequency Characteristics Temperature Characteristics Packaging (please call factory) 20120701 Δ R/R (ppm) Typical TC distribution of NQY1/41001A 400 200 +2ppm/C -200 -2ppm/C -400 -60 -40 -20 0 20 40 60 80 100 120 Temperature, degree C Resistance(ohm) 100K R1210Z50KA 10K R1210Z10KA R1210Z1KA 1 K R1210Z100RA 100 R1210Z50RA 1 0 1K 10K 100K 1M 10M 100M 1G 10G Frequency(Hz) Nikkohm Co., Ltd. 3-31-2640 Minamicho, Misawa, Aomori 033-0036 Japan TEL: +81-176-53-2105, FAX: +81-176-53-2106 Tape Dimensions A B C W E t Note R3020 4.0+/-0.1 Reel Dimensions RA RB RC RD RE RG RH R1206 R1210 R2010 11.4+/-1.0 R2512 R3020 13.0+/-1.0 2.0+/-0.5 21+/-0.8 Quantity per Reel Quantity R1206 500pcs, 1000pcs, 2000cs R1210 500pcs, 1000pcs, 2000pcs R2010 500pcs, 1000pcs, 2000pcs R2512 500pcs, 1000pcs R3020 500pcs, 1000pcs RoHS A B E 1.75+/-0.1 W 1.5+0.1-0.0 0.3 max 2.0+/-0.05 C t Pull out RC RD RH RG RE RB RA