R CK | Alldatasheet

Document overview

  • PDF pages: 3

Technical content

K Rotary K–18 Dimensions are shown: Inch (mm) Specifications and dimensions subject to change www.ckswitches.com Models Available R Series ROTA-SLIDE® Rotary Switches Features/Benefits

  • Multi-pole and multi-position
  • Positive detent
  • Panel and PCB mounting
  • Enclosed
  • RoHS Compliant Typical Applications Ceiling fans
  • Industrial equipment
  • Portable tools Specifications CONTACT RATING: Q contact material: 5 AMPS @ 125 V AC; 2.5 AMPS @ 250 V AC; 0.5 AMP @ 125 V DC; 1/8 HP @ 125 and 250 VAC (UL/CSA). See page K-20 for additional ratings. ELECTRICAL LIFE: 10,000 make-and-break cycles at full load. CONTACT RESISTANCE: Below 10 m Ω typ. initial @ 2-4 V DC, 100 mA, for both silver and gold plated contacts. INSULATION RESISTANCE: 109 Ω min. DIELECTRIC STRENGTH: 1,000 Vrms min. @ sea level. INDEXING: 36º-one contact models, 10 position max.; two contact models, 5 position max. OPERATING & STORAGE TEMPERATURE: -30ºC to 95ºC Materials HOUSING & BUSHING: 6/6 nylon (UL 94V-2). ACTUATOR: 6/6 nylon (UL 94V-2). CONTACTS & TERMINALS: Q contact material: Copper, silver plated. See page K-20 for additional contact materials. CONTACT SPRING: Music wire or stainless steel. MOUNTING NUT: Steel, zinc plated. TERMINAL SEAL: Epoxy. NOTE: Any models supplied with Q or B contact material are RoHS compliant. NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Custome Service Center. Build-A-Switch To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages K-19 and K-20. For additional options not shown in catalog, consult Customer Service Center. Switch Function R100 SP, 36° Index, 10 pos. no stops R103 SP, 36° Index, 3 pos. R104 SP, 36° Index, 4 pos. R108 SP, 36° Index, 8 pos. R203 DP, 36° Index, 3 pos. R204 DP, 36° Index, 4 pos. R205 DP, 36° Index, 5 pos. Terminations

03 Solder lug with hole

01 Solder lug with notch

02 PC Thru-hole

07 .500” high with .156” flat 05 .375” high with .156” flat

15 Screwdriver slot without bushing

RR 3/8-32 threaded bushing RN PC without bushing RS PC without bushing

K–19 Dimensions are shown: Inch (mm) Specifications and dimensions subject to change www.ckswitches.com KRotary Third Angle Projection R Series ROTA-SLIDE® Rotary Switches SWITCH FUNCTION ACTUATOR DP MODELS 36º INDEXING SCHEMATIC SP MODELS 36º INDEXING SCHEMATIC 15 SCREWDRIVER SLOT07 .50019” HIGH WITH .156” FLAT 05 .375”19 HIGH WITH .156” FLAT NOTE: Break-before-make contacts. Actuators and contacts are shown in position 1. No common terminal is present. Switching function is provided by movable contacts shorting adjacent pairs of stationary contacts. Part number show: R10007RR03Q Shown with ‘RR’ mounting style. For mounting styles without bushing, add .250 (6,35) to actuator length. Shown with ‘RN’ mounting style. Arrow on actuator marked red (std.). Shown with ‘RS’ mounting style. All models with all options when ordered with ‘Q’ contact material. 10-1-2-3-44 PositionR104 10-1-2-33 PositionR103 All Terminals10 Position No StopsR100 SP TERMINALSSWITCH FUNCTION MODEL NO. NO. POLES SP MODELS 36º INDEXING 10-1-2-3-4-5-6-7-88 PositionR108 All Terminals5 PositionR205 All Terminals4 PositionR204 10-1-2-3,5-6-7-83 PositionR203 DP TERMINALSSWITCH FUNCTION MODEL NO. NO. POLES DP MODELS 36º INDEXING

ROTA-SLIDE® Rotary Switches MOUNTING STYLE TERMINATIONS CONTACT MATERIAL SEAL PANEL MOUNTING PC MOUNTING NONE NO SEAL E EPOXY SEAL

03 SOLDER LUG WITH HOLE 02 PC THRU-HOLE WC WIRE LEAD01 SOLDER LUG WITH NOTCH

RS PC SCREWDRIVER SLOT WITHOUT BUSHINGRR 3/8-32 THREADED BUSHING RN PC WITHOUT BUSHING Mounting nut included (part number 175000100). Position numbers and characters are molded on housing. * Note: See Technical Data section of this catalog for RoHS compliant and compatible definition and specifications. 1 CONTACTS & TERMINALS: Copper, with gold plate over nickel plate. 2 CONTACTS & TERMINALS: Copper, silver plated. (Standard with all termination options.) All models with all options when ordered with ‘Q’ contact material. NOTE: Any models supplied with Q, B or G contact material are RoHS compliant. CONTACT ANDOPTION CODE TERMINAL MATERIAL RATING Q 5 AMPS @ 125 V AC; 2.5 AMPS @ 250 V AC; 0.5 AMP @ 125 V DC (UL/CSA); 1/8 HP @ 125 and 250 VAC (UL/CSA). LOW LEVEL/DRY CIRCUITB SILVER 2 POWER 0.4 VA MAX. @ 20 V AC or DC MAX.GOLD 1 6.00 (152,4) .50 (12,7)

22 AWG

K Rotary K–20 Dimensions are shown: Inch (mm) Specifications and dimensions subject to change www.ckswitches.com