QS001 TTELEC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 1

Technical content

TaNSil® 0.025” Lead Pitch High Frequency Resistor Network QS001 Series Pull up/down resistor QSOP package - small footprint Parallel transmission line terminator High level of integration - replaces 22 discrete resistors Center located ground pins improve signal integrity at high frequencies General Note IRC reserves the right to make changes in product specification without notice or liability. All information is subject to IRC’s own data and is considered accurate at time of going to print. A subsidiary of TT electronics plc• 4222 South Staples Street • Corpus Christi T exas 78411 USA© IRC Advanced Film Division T elephone: 361 992 7900 • Facsimile: 361 992 3377 • Website: www.irctt.com QS001 Series Issue December 2008 Sheet 1 of 1 QS001 Series

  • Pull up/down resistor
  • QSOP package - small footprint
  • Parallel transmission line terminator
  • High level of integration - replaces 22 discrete resistors
  • Center located ground pins improve signal integrity at high frequencies TaNSil® 0.025" Lead Pitch High Frequency Resistor Network Schematic Data 12 34 56 78 91 01 11 2 24 23 22 21 20 19 18 17 16 15 14 13 Electrical Data Resistance Range (Ω) Absolute Tolerance (%) TCR (ppm/°C) TCR Tracking (ppm/°C) Operating Temperature Range (°C) Maximum Operating Voltage (volts) Maximum Resistor Power Dissipation (watts) Maximum Network Power Dissipation (Watts) 30 - 100 ±5, ±10, ±20 ±25, ±50, ±100 ±5 -55 to +125 100V or PR 0.1 1.0√ Sample Part Number GUS - QS001 - 03 - 56R0 - K Family Model 24-Pin QSOP Temperature Coefficient Resistance Standard MIL resistance code (Example: 1001 = 1000Ω, 1003 = 100,000Ω) Tolerance Ordering Data IRC’s QS001 series 24 pin QSOP resistor network is specially designed for operation in digital circuits with high frequency, low propagation delay requirements. The device contains 22 TaNSil ® resistor elements which provide rug - ged, reliable, trouble free operation. The dual, center located common connections provide reduced propagation delay and improved signal integrity over standard bussed schematics. IRC’s QS001 series 24 pin QSOP resistor network is specially designed for operation in digital circuits with high frequency, low propagation delay requirements. The device contains 22 TaNSil® resistor elements which provide rugged, reliable, trouble free operation. The dual, center located common connections provide reduced propagation delay and improved signal integrity over standard bussed schematics. General Note IRC reserves the right to make changes in product specification without notice or liability. All information is subject to IRC’s own data and is considered accurate at time of going to print. A subsidiary of TT electronics plc• 4222 South Staples Street • Corpus Christi T exas 78411 USA© IRC Advanced Film Division T elephone: 361 992 7900 • Facsimile: 361 992 3377 • Website: www.irctt.com QS001 Series Issue December 2008 Sheet 1 of 1 QS001 Series
  • Pull up/down resistor
  • QSOP package - small footprint
  • Parallel transmission line terminator
  • High level of integration - replaces 22 discrete resistors
  • Center located ground pins improve signal integrity at high frequencies TaNSil® 0.025" Lead Pitch High Frequency Resistor Network Schematic Data 12 34 56 78 91 01 11 2 24 23 22 21 20 19 18 17 16 15 14 13 Electrical Data Resistance Range (Ω) Absolute Tolerance (%) TCR (ppm/°C) TCR Tracking (ppm/°C) Operating Temperature Range (°C) Maximum Operating Voltage (volts) Maximum Resistor Power Dissipation (watts) Maximum Network Power Dissipation (Watts) 30 - 100 ±5, ±10, ±20 ±25, ±50, ±100 ±5 -55 to +125 100V or PR 0.1 1.0√ Sample Part Number GUS - QS001 - 03 - 56R0 - K Family Model 24-Pin QSOP Temperature Coefficient Resistance Standard MIL resistance code (Example: 1001 = 1000Ω, 1003 = 100,000Ω) Tolerance Ordering Data IRC’s QS001 series 24 pin QSOP resistor network is specially designed for operation in digital circuits with high frequency, low propagation delay requirements. The device contains 22 TaNSil ® resistor elements which provide rug - ged, reliable, trouble free operation. The dual, center located common connections provide reduced propagation delay and improved signal integrity over standard bussed schematics. Resistors Make Possible 07.14 General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. © TT Electronics plc www.ttelectronicsresistors.com All Pb-free parts comply with EU Directive 2011/65/EU (RoHS2)