QMT42_V02 BANNER | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
Adjustable sensing distance up to 6 meters (20 inches)
- Powerful, collimated infrared light source and special lensing for reliable long-range detection of even the darkest objects
- Low-cost, compact, rugged sensors in metal die-cast housings
- Leakproof IP67 (NEMA 6) construction for reliable sensing in harsh environments
- Outstanding electrical noise immunity
- Dual LED system indicates sensor performance
- Choice of unterminated cable or quick-disconnect connector WARNING: Not To Be Used for Personnel Protection Never use this device as a sensing device for personnel protection. Doing so could lead to serious injury or death. This device does not include the self-checking redundant circuitry necessary to allow its use in personnel safety applications. A sensor failure or malfunction can cause either an energized or de-energized sensor output condition. Models Models Range Cable Supply Voltage Output Type QMT42VN6DX 10 mm (0.4 in) to 6 m (20 ft) 2 m (6.5 ft)
10 V dc to 30 V dc
QMT42VP6DX 2 m (6.5 ft) PNP QMT42VP6DXQ 4-pin Euro QD Wiring Sensors with NPN Outputs Sensors with PNP Outputs Cabled Models bu bn - +bk wh Load Load Load Load 10-30V dc Quick-Disconnect Models bu bn - +bk wh Load Load 10-30V dc Cabled Models bn bu - bk wh Load Load 10-30V dc Quick-Disconnect Models bn bu - bk wh 10-30V dc Load Load QMT42 Series Long-Range Diffuse Sensors Original Document 57890 Rev. A
19 May 2016
- 13-ga. stainless steel
- Hardware included A B B Hole center spacing: A = 10.0, B = 25.4 Hole size: A = ø 3.4, B = ø 2.5 SMB42U
- 13-ga. stainless steel
- Hardware included A B B Hole center spacing: A = 30.0, B = 25.4 Hole size: A = ø 3.4, B = ø 2.5 Banner Engineering Corp. Limited Warranty Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product. THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE. This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE. Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously manufactured by Banner Engineering Corp. Copyright Notice Any misuse, abuse, or improper application or installation of this product or use of the product for personal protection applications when the product is identified as not intended for such purposes will void the product warranty. Any modifications to this product without prior express approval by Banner Engineering Corp will void the product warranties. All specifications published in this document are subject to change; Banner reserves the right to modify product specifications or update documentation at any QMT42 Series Long-Range Diffuse Sensors www.bannerengineering.com - Tel: +1-763-544-3164