QM42 BANNER | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

  • Compact, rugged, low cost self-contained sensors in metal die cast housings
  • Epoxy-encapsulated circuitry; leakproof IP67 (NEMA 6) construction for harsh environments
  • Outstanding electrical noise immunity
  • Dual LED system indicates sensor performance
  • Choice of integral cable or quick disconnect connector WARNING: Not To Be Used for Personnel Protection Never use this device as a sensing device for personnel protection. Doing so could lead to serious injury or death. This device does not include the self-checking redundant circuitry necessary to allow its use in personnel safety applications. A sensor failure or malfunction can cause either an energized or de-energized sensor output condition. Models QM42 Opposed Mode Emitter (E) and Receiver (R) Models Cable Output Type QM426E Emitter 2 m (6.5 ft) QM426EQ Emitter 4-pin Euro QD QM42VN6R Receiver 2 m (6.5 ft) NPN QM42VN6RQ Receiver 4-pin Euro QD QM42VP6R Receiver 2 m (6.5 ft) PNP QM42VP6RQ Receiver 4-pin Euro QD QM42 Plastic Fiber Optic Mode Models Cable Output Type QM42VN6FP 2 m (6.5 ft) NPN QM42VN6FPQ 4-pin Euro QD QM42VP6FP 2 m (6.5 ft) PNP QM42VP6FPQ 4-pin Euro QD QM42 Diffuse Mode Models Cable Output Type QM42VN6D 2 m (6.5 ft) NPN QM42VN6DQ 4-pin Euro QD QM42VP6D 2 m (6.5 ft) PNP QM42VP6DQ 4-pin Euro QD QM42 Polarized Retroreflective Mode Models Cable Output Type QM42VN6LP 2 m (6.5 ft) NPN QM42VN6LPQ 4-pin Euro QD QM42VP6LP 2 m (6.5 ft) PNP QM42VP6LPQ 4-pin Euro QD To order the 9 m (30 ft) cable models, add the suffix "W/30" to the model number of any cabled sensor (for example, QM42VN6D W/30). Models with a QD connector require a mating cable. Specifications Sensing Beam Infrared, 880 nm for opposed and diffuse Visible red, 660 nm for fiber optic and retroreflective modes Supply Voltage and Current 10 to 30 V dc (10% maximum ripple) at less than: Diffuse and retroreflective models: 20 milliamps Opposed mode: 30 milliamps (emitter), 10 milliamps (receiver) Fiber optic models: 30 milliamps Supply Protection Circuitry Protected against reverse polarity and transient voltages Output Configuration SPDT (complementary) solid-state dc switch; Choose NPN (current sinking) or PNP (current sourcing) models. Light operate: N.O. output conducts when the sensor sees its own (or the emitter's) modulated light Dark operate: N.C. output conducts when the sensor sees dark Output Rating 100 mA maximum (each output) Off-state leakage current: < 5 microamps at 30 V dc On-state saturation voltage: < 1 V at 10 mA dc; < 1.5 V at 100 mA dc Repeatability Diffuse and retroreflective modes: 250 microseconds Opposed Mode: 120 microseconds Fiber optic mode: 60 microseconds Adjustments All models except emitters: 15-turn slotted brass GAIN (sensitivity) adjustment potentiometer (clutched at both ends of travel) Indicators Two LEDs: green and amber Green solid = power to sensor is on (Opposed emitters: Green power "on") Green flashing = output is overloaded Amber solid = light is sensed; normally open output on Amber flashing = marginal excess gain (1–1.5x) in light condition Construction Housings are die-cast zinc alloy with black epoxy powder paint finish; lenses are acrylic Connections 2 m (6.5 ft) or 9 m (30 ft) attached cable, or 4-pin Euro-style quick-disconnect fitting; Cables for QD models are purchased separately QM42 Series Sensor Original Document 44487 Rev. B

1 May 2017

Output Protection Circuitry Protected against false pulse on power-up and continuous overload or short-circuit of outputs Overload trip point ≥ 150 mA, typical, at 20 °C Output Response Time Diffuse and retroreflective modes: 1 millisecond on and off Opposed mode: 1 millisecond on, 0.5 millisecond off Fiber optic mode: 0.25 millisecond on and off Environmental Rating IP67; NEMA 6 Operating Conditions Temperature: − 20 °C to +70 °C ( − 4 °F to +158 °F) Relative Humidity: 90% at +50 °C maximum relative humidity (non-condensing) Certifications Required Overcurrent Protection WARNING: Electrical connections must be made by qualified personnel in accordance with local and national electrical codes and regulations. Overcurrent protection is required to be provided by end product application per the supplied table. Overcurrent protection may be provided with external fusing or via Current Limiting, Class 2 Power Supply. Supply wiring leads < 24 AWG shall not be spliced. For additional product support, go to www.bannerengineering.com. Supply Wiring (AWG) Required Overcurrent Protection (Amps) 20 5.0 22 3.0 24 2.0 26 1.0 28 0.8 30 0.5 Performance Curves Plastic Fiber Optic Mode - Range: 40 mm (1.5 in) Excess Gain Beam Pattern Excess Gain Beam Pattern 1 100 10 mm0.4 in 100 mm4.0 in1000 mm40 in1 mm0.04 in 1000 DISTANCE EXCESS GAIN QM42FPOpposed Mode with PIT46U Fibers 010 mm20 mm30 mm 10 mm20 mm30 mm 00.4 in0.8 in1.2 in 0.4 in0.8 in1.2 in DISTANCE QM42FPOpposed Mode with PIT46U Fibers 100 1000 DISTANCE EXCESS GAIN QM42FPDiffuse Mode 02 mm4 mm6 mm 2 mm4 mm6 mm 00.08 in0.16 in0.24 in 0.08 in0.16 in0.24 in DISTANCE QM42FPDiffuse Mode with PBT46U Fiber Opposed Mode - Range: 10 m (33 ft) Diffuse Mode - Range: 400 mm (16 in) Excess Gain Beam Pattern (Effective beam: 8 mm) Excess Gain Beam Pattern 2 100 1 m3.3 ft 10 m33 ft 100 m330 ft.1 m.33 ft 1000 DISTANCE EXCESS GAIN QM42E/R Opposed Mode 10 m32.5 ft8 m26 ft6 m19.5 ft4 m13 ft2 m6.5 ft0 0100 mm200 mm300 mm 100 mm200 mm300 mm 04 in8 in12 in 4 in8 in12 in DISTANCE Opposed ModeQM42E/R 100 10 mm.4 in 100 mm4 in 1000 mm40 in1 mm.04 in 1000 DISTANCE EXCESS GAIN QM42D Diffuse Mode 500 mm20 in400 mm16 in300 mm12 in200 mm8 in100 mm4 in0 010 mm20 mm30 mm 10 mm20 mm30 mm 00.2 in0.4 in0.6 in 0.4 in0.8 in1.2 in DISTANCE Diffuse ModeQM42D 1 Diffuse mode performance is based on a 90% reflectance white test card. 2 Performance is based on a 90% reflectance white test card. QM42 Series Sensor 2 www.bannerengineering.com - Tel: +1-763-544-3164 P/N 44487 Rev. B

Polarized Retroreflective Mode - Range: 3 m (10 ft) Excess Gain Beam Pattern 100 1 m3.3 ft 10 m33 ft 100 m330 ft.1 m.33 ft 1000 DISTANCE EXCESS GAIN QM42LPRetroreflective Mode with BRT-3 Reflector 020 mm40 mm60 mm 20 mm 00.8 in1.6 in2.4 in 0.8 in40 mm 1.6 in60 mm 2.4 in DISTANCE QM42LPRetroreflective Mode with BRT-3 Reflector Dimensions Cabled Diffuse, Opposed, and Retroreflective Models Quick Disconnect Models Quick Disconnect FP Models 12.7 mm (0.50 in) 23.9 mm (2) (0.94 in) ø 3.2 mm (0.125 in) (4 Holes) 27.1 mm (2) (1.07 in) 42.0 mm (1.65 in) 42.0 mm (1.65 in) Cutoff Distance Adjustment Green LED Power Indicator Amber LED Output/Marginal Indicator (Except emitters) 10.0 mm (0.39 in) 12.3 mm (0.48 in) Threaded M4 x 0.7 Mounting Holes M12 x 1 x 18 mmEuro-style 60.2 mm(2.37 in) 42.0 mm(1.65 in) 45.9 mm(1.81 in) 48.5 mm(1.91 in) QM42FP Models Wiring Diagrams Sensors with NPN Outputs Sensors with PNP Outputs Key 10-30V dc

4 Load

Cabled Models Quick Disconnect Models Key 10-30V dc 3 10–30 V dc− 1 - brown 2 - white 3 - blue 4 - black Cabled models are shown. Quick disconnect (QD) wiring diagrams are functionally identical. QM42 Series Sensor P/N 44487 Rev. B www.bannerengineering.com - Tel: +1-763-544-3164 3

4-Pin Threaded M12/Euro-Style Cordsets Model Length Style Dimensions Pinout (Female) MQDC-406 1.83 m (6 ft) Straight 44 Typ. ø 14.5 M12 x 1 1 = Brown 2 = White 3 = Blue 4 = Black MQDC-415 4.57 m (15 ft) MQDC-430 9.14 m (30 ft) MQDC-450 15.2 m (50 ft) MQDC-406RA 1.83 m (6 ft) Right-Angle 32 Typ.[1.26"] 30 Typ.[1.18"] ø 14.5 [0.57"] M12 x 1 MQDC-415RA 4.57 m (15 ft) MQDC-430RA 9.14 m (30 ft) MQDC-450RA 15.2 m (50 ft) Brackets SMB19

  • Right-angle mounting bracket with a curved slot for versatile orientation 20.1 mm(0.79 in) 45.5 mm(1.79 in) 2.5 mm(0.10 in) 3.05 mm Slot(0.120 in)ø 3.05 mm(0.120 in) 31.8 mm(1.25 in) 24.1 mm R(0.95 in) 15º 20.3 mm(0.80 in)4.32 mmSlot (2)(0.170 in) All measurements are listed in millimeters [inches], unless noted otherwise. Banner Engineering Corp. Limited Warranty Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product. THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE. This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE. Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously manufactured by Banner Engineering Corp. Any misuse, abuse, or improper application or installation of this product or use of the product for personal protection applications when the product is identified as not intended for such purposes will void the product warranty. Any modifications to this product without prior express approval by Banner Engineering Corp will void the product warranties. All specifications published in this document are subject to change; Banner reserves the right to modify product specifications or update documentation at any time. Specifications and product information in English supersede that which is provided in any other language. For the most recent version of any documentation, refer to: www.bannerengineering.com. QM42 Series Sensor © Banner Engineering Corp. All rights reserved