QM40-26R-CF | DigiCamel IC Datasheet

Online Datasheet

Read QM40-26R-CF online.

QM10-14R-PR HIROSE | Alldatasheet

Document overview

Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
PDF pages: 14

Technical content

Features

(1) 1.78mm (.070") grid contact position enables high (5) Zinc alloy die-cast shell and Metallic shell reduce density designs. the penetration of external EM noise. (2) Ribbon construction of contacts provides excellent (6) Hood type and with Lock mechanism type are . mechanical strength. available for Cover shell. One touch lock mechan- (3) Capable group IDC termination of 0.89 mm (.035”) ism assures easy and quick connection. pitch cable (AWG No.30) to achieve labor saving in connection work. (4) The connectors can be grounded to the PCB to isolate EMI/FRI generated from the cable and connector as well as latched to PCB.

Applications

[en een sd Material and Finish [tem Tees TF] [insulation | PET Resin | Block conser Pee _[ Seta ssoee | Serene [ Socket _[ Phosphor bronze | plating

Ordering Information

QM !10— 14 R_(L)— PR _ (1) Series Number: QM . . (2). Serial sign for series 7 T 7 7 7 7 10: Right Angle P.C. Mount receptacle 7 20: Straight P.C, Mount receptacle a @ @ @ ® 6) 90: 106 Plug 40: Solder Type . (3) No. of Pin: 8, 14, 26 and 32 way QM 30— 14 P — EP (4) Type of opening ‘ P: Plug (for Hood cover)

7 T T i 7 PA: Plug (for cover with Lock mechanism)

R: Receptacle (1) (2) *(8)— (4) (6) (5) Type of Snap Latch mounting Blank: Connector unit on a level with PCB. (see Fig 1) QM — 14—CS L: Protector on a level with PCB. (see Fig 2) (6) Accessories CS: Cover case with Lock mechanism . (1) (3) (6) Connector Unit CV: Hood cover case CF: Hood ‘ PR: Protector Fig 1 2 CFI: Hood PR1: Protector (Without mounting hole) PCB EP: Ground Plate SP: Stopper Plate Fig 2 rotator [te CY UL bl 3 WL TTTTA PCB ; 176

Applicable Cable AWG No.30(7/0.1) AWG No.30 *When Viny! P=0.89 Chloride is w ANG Wo 30 Shar 2. 1/0 End Finish 10, 15 (13) < No. of LS rm Ba’ | _* a | 8 | 4.8 | After holding shield =P braid over cable sheath, B | 55 | wrap metal shielded Wiotal-ahielded tape | 26 | 6.8 | tape up to about 1.5 3. Tooling [_@ | awao-aPe QM30-14P* ams3o-14¢P | HIF QM30-## PB i : L_32_[amso-s2P | 0M30-326P 4. How to install cover case Please refer to next page. 5. Precaution for Cable End Finish The cover case of QM series is made of zinc alloy die-cast which is effective for EMI shielding protection and the outside of cover case is coated with silver to provide excellent connection. The shield structure for this QM series comprises 5 parts as per figure below, Therfore, I/O End . Finish Treatment is essential for EMI shielding protection. Grounding to PCB can be accomplished through the connection of plates provided on both sides of plug and receptacle. Cover case OSX SS Protective plate Zag Plate (A). NES Ya Zp > S) Protects JYY Ws Plate (B) pu 4 Ori 177

How To Install Cover Case-QM-°>x >< -CS (1) Use HIROSE Connecting tools, to perform IDC connection to Connector Unit (QM30—*PA—EP), aN’ 4a Connector unit Zi, A) 0) SS (2) Take out one side of the lock from the housing. cla: Bend the accompanying clamp into a bow shape =P Lock and install it on the housing. AY yy Core case [SR rN Sead SREX USRe pS) Hole for installing —— (FX _2onnector unit . Clamp Wis f . (3) Insert the lock plate into the slit at both sides of Connector Unit. f} Position for fixing spring Lo portion of Lock Plate . Send SB 1 Slit SN (4) Insert another lock plate as described above, and fix connector unit into the correct position in the cover case. ‘ Ca ASKS } AD TE Boo Lock plate (5) Fix spring portion of lock plate into the correct position. (6) Assemble it with attached screw (M25*0.45*6) . (When assembling the cover case, do it by pushing the lock button; . Connector unit to be completely installed) Cover case S J SS le) Z| S Vv SiG Caution: Be sure to install the cable, connector unit, and Zug Lock plate . lock at the specified positions. Parts installed at { improper positions wil! cause a gap in the hous- f Screw ‘ing joint and damage the connector unit. & 178

QM40- > > P/QM40- >x 3X PA (Solder Plug Connectors) The solder connectors have been developed for use with thinner cables than the convention- al specified cables. The connectors are basically the same as the QM30. Design the harness by considering the following.

1 Solder wires quickly (15W-3sec) because the connector housings are made of PET re-

sin (thermoplastic). 2 Be sure to make the diameter cables to the dimensions specified on Page 177. Connector Setup View - gout oN q S + uy Cover case: QM—*—CV Cover case: QM—*—CS Connector: QM30—*P—EP Connector: QM30—*—PA—EP ) . 179

P.C. Mount Receptacle Connector 1. PCB Layout (mm) Thickness of PCB: 1.6 mm. R0.35Max. 0.5Min. J fife-o—t 2 Tea {fee aeee = Dm Tae] [8 _| owen | se] | LP P=ts , awe-14R_| 10.68 | 14.96 | [25 | owe26n | 21.96 | 25.64 B am*-32R | 26.70 | 30.98 2. Mounting Style (mm) A Type 3.78 3. aH [8 | awio.an-Pr

2 QM10-14R-PR

Panel Cutout (mm) Thickness of Panel: Max. 1.6 mm $2.8 R 2 Max. i No.of | Pee ese Ta Ts ] - - o 4. Precaution for selection of Cleaning Solvents # Insulation material is PET that has excellent chemical and heat resistance. As for Protector, please refer to table—1 below for selection of cleaning because of the coating treatment used. Table—1 . | YU ttrasonic cleaning 1] Vapor phase cleaning %2 ‘Alcohol a Trichlorawflueromettene | o| +d . Chlorothene a 31: Ultrasonic cleaning : 10 minutes 2: Vapor cleaning: _S minutes (Repeat of vapor and ultrasonic cleaning (30 sec)). 4; For thirty minutes to one hour after washing the connectors, handle | : PCBs on which the connectors are mounted with special care be- cause the coating surface swells and can be easlly flawed. 181

Plug Connector (for Cover Case with Lock Mechanism) A fa) ery y IG a ie a) ol te aa =a} | ba Peery Lit: mm . No. of ee eee PT me [fe] OM90-14PA-EP : | cu226-oosi-s | 8 | autso— eraer | 14.12 | 022 | cuz2s—oo6a—7 | 14 | awso-r4ra-er | 10.46 | 14.66 | | cuz2s-o0ca-o | 26 _| amso-26rA—er | 30.14 | 26.4 [_cu22s-ooes-2 32 | anao-szpa—er| 36.48 | 30.68] 30° Cable Exit Cover Case with Lock Mechanism _ Cable Inlet 1s as ' \\o ane | ao Bl \\dir® RS wy Unit: mm c.2-080-0 [wenn [Sit [ mene [8 Te | OM14-C8 | cu2ze—cosr—7 | 8 | am ees | e02| ose | | [ ctazs-ooss-o | 14 | aw-tecs | 2536 | vss | | cx2as-oosa-2 | 26 | aw-26-cs | s4os | sxe | [ctaxs-ooeo-t | 22_[aw-sz-es | 9:8 [ 55x95 | 182

Plug Connector (for Hood Cover Case) , A Pb: | pS) ) calel “ Ke f. ~~ «1 ry Ie laa Unit: mm agen oom [rT mene To | | [ ci226-oo0e-a | 14 | amso-rap-ep | 1946 | 1466 | [cr2z6-oo10-3 | 26 | anso-zsp-ep [0.4 | 25.3 | Hood Cover Case : y n B es > {/+S \\} (eb Va i a . << @] H ; VF . Unit: c.zze-on-8 [_resve [Be] rem [a Te |e | ower | cuzzs-ooto-a | 8 | om e-ev|isea| - | os | | cuaas-oort—e | 1 [aw tev [2076 [tas | 055 | [Lcuzzs-oora-e |_26 | _aw-zscv | 31.08 [260 /s5x85 | 183

Receptacle with Protector (Right Angle P.C. Mount Type) A 2] B 2- 92.8 3 . é

7 DL OPS HO+ si g| s

gad )) P=L78 Dip Post << sujal a Loo | c | . ait reseed | ciaze-coaa-ooz | | awro-an-raio2) |26.02]21.02) 2.62) OMIO-E-PRCE) [ciz2600157-02 | 18 | owro-an-enca)_|31.26|26.06| 1606 Receptacle with Protector (Right Angle P.C. Mount (L) Type) ’ ea : | | \\ A : y v1.78 | Le Dip Post | is 4 | (0.20.35) 13,25) Wie | 0L226-0019-8-02 ae QMMt0-s4RIL)-PR(O2 [ecza-ooena-o9 | we [ omomvenwacenea’ | 335 | 2036 | 406] e1726~0020-7-02 | 26 _| Gwio—26n(LI-PrIoai | 42.04 | 97.08 | 25.66 | 185

Receptacle (without Mounting Hole) : with Protector (Right Angle P.C. Mount Type) econ = +— a.) A # N\\ é eS a if ? B Dip Post (13.25) . (0.2%0.35) (15) . [me a] ic , c1226-0028-5-02 fono- aniui-ravioa) |i7ea | eae] QM10-14R(L)-PR1(02) Jamio-14RiL)—PRi(02) | 23.16 | 14.96 | [ tz26=coss-6-o2 | 32 [awio-s2nic-pnvioa) [30.18 | 3006 | Receptacle with Protector (Straight Dip Type) ‘ A Z B 292.8. : CGE g NG | P=1.78 Dip Post 3 a Unit:mm | cu2es-oore-s | 26 | amzo-zor-pn | 42.04 | s7.0e | 25.6 | [cxzzosoe-e se | owao-san-en [are [aes |eose] 186

Receptacle (without Mounting Hole) with Protector (Straight Dip Type) ; A | i} Kieceeeesy pei | | \\. Dip Post u a ‘. ' 32 Unitmm : Pe fey me To | CL226-0054-9_ ee LL ee ee | [eceas-ooes-1| ae [_aweo-sornr | aaae | 250 | [cuzs-o056-«] 22 | —awao-cen-npi_| see | 2030 | Hood (QM->x > -CS) 4-(R1) . fi WT i) A 15 A 1.5 9 1.2 Unitmm see Dem Fe me Te] (QM-14-CF po Ct | [ezs-oness| 1 | awwor | ma | 6s | 187

Hood (QN->x > -CV) 8-(R1) limsaceca| LAS)

1 A 1 9

Product Information

QM40-26R-CF specifications and overview.

Summary

QM (1.78mm-070) CONNECTORS

Description

QM (1.78mm-070) CONNECTORS

Source title QM40-26R-CF Datasheet(PDF) - Hirose Electric

Related Parts

More parts from the same family.

Browse manufacturer