QM26 BANNER | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 16

Technical content

Hygienic Stainless Steel Sensors for Washdown and Chemical Compatibility

  • QM26: Washdown rated with convenient 25.4 mm (1 in) mounting spacing and 3 mm (0.125 in) mounting hardware
  • QMH26: Hygienic shape for superior cleaning performance Made from FDA compliant materials for worry-free use in food and pharmaceutical applications
  • Chemically resistant, non-toxic 316L stainless steel housing Acrylic optical window with coating for resistance to hydrogen peroxide and alcohol IP69K rated for use in harsh 1500 psi washdown environments at 80° C (176° F)
  • Withstands environmental temperature cycling from –30° to +60° C (–22° to +140° F)
  • Sealed housing and smooth joints minimize cleaning time and reduce bacterial accumulation
  • Sensor marking is chemically etched into the housing for long-lasting identification and to eliminate food contamination
  • Push buttons and light pipes are over-molded to reduce crevices and provide excellent cleaning and sealing results High performance coaxial polarized retroreflective models for clear or transparent bottle and film detection
  • Excellent background suppression performance with advanced ambient light suppression Bright, visible red light spot on adjustable background suppression models makes alignment easy
  • Models have a hygienic design for easy cleaning and sanitizing WARNING: Not To Be Used for Personnel Protection Never use this device as a sensing device for personnel protection. Doing so could lead to serious injury or death. This device does not include the self-checking redundant circuitry necessary to allow its use in personnel safety applications. A sensor failure or malfunction can cause either an energized or de-energized sensor output condition. QM26 Models Stainless Steel Sensors for Washdown and Chemical Compatibility Model Mode Range Output Connector QM26E-5M Emitter 8.5 m (27.8 ft) NA 5 m (16.25 ft) cable, 4 wire QM26EQ5 200 mm (7.5 in) PVC pigtail, M12 Euro QD connector, 4-pin QM26VNR-5M Receiver Complementary NPN 5 m (16.25 ft) cable, 4 wire QM26VNRQ5 200 mm (7.5 in) PVC pigtail, M12 Euro QD connector, 4-pin QM26VPR-5M Complementary PNP 5 m (16.25 ft) cable, 4 wire QM26VPRQ5 200 mm (7.5 in) PVC pigtail, M12 Euro QD connector, 4-pin QM26VNLP-5M Polarized Retroreflective 3 m (9.8 ft) with BRT-60X40C Complementary NPN 5 m (16.25 ft) cable, 4 wire QM26VNLPQ5 200 mm (7.5 in) PVC pigtail, M12 Euro QD connector, 4-pin QM26VPLP-5M Complementary PNP 5 m (16.25 ft) cable, 4 wire QM26VPLPQ5 200 mm (7.5 in) PVC pigtail, M12 Euro QD connector, 4-pin QM26ENXLPC-5M Expert™ Coaxial Polarized Retroreflective 2.6 m (8.5 ft) with BRT-60X40C NPN 5 m (16.25 ft) cable, 4 wire QM26ENXLPCQ5 200 mm (7.5 in) PVC pigtail, M12 Euro QD connector, 4-pin QM26EPXLPC-5M PNP 5 m (16.25 ft) cable, 4 wire QM26EPXLPCQ5 200 mm (7.5 in) PVC pigtail, M12 Euro QD connector, 4-pin QM26 and QMH26 Series Sensors Original Document 166534 Rev. E

16 October 2017

Model Mode Range Output Connector QM26VNAF400-5M Adjustable Field Background Suppression 5 to 400 mm (0.2 in to 15.7 in) Complementary NPN 5 m (16.25 ft) cable, 4 wire QM26VNAF400Q5 200 mm (7.5 in) PVC pigtail, M12 Euro QD connector, 4-pin QM26VPAF400-5M Complementary PNP 5 m (16.25 ft) cable, 4 wire QM26VPAF400Q5 200 mm (7.5 in) PVC pigtail, M12 Euro QD connector, 4-pin QM26VNAF200-5M Adjustable Field Background Suppression (small light spot) And 5 to 200 mm (0.2 in to 7.85 in) Complementary NPN 5 m (16.25 ft) cable, 4 wire QM26VNAF200Q5 200 mm (7.5 in) PVC pigtail, M12 Euro QD connector, 4-pin QM26VPAF200-5M Complementary PNP 5 m (16.25 ft) cable, 4 wire QM26VPAF200Q5 200 mm (7.5 in) PVC pigtail, M12 Euro QD connector, 4-pin QMH26 Models Hygienic Stainless Steel Sensors for Washdown and Chemical Compatibility Model Mode Range Output Connector QMH26VNLP-5M Polarized Retroreflective 3m (9.8 ft) with BRT-60X40C Complementary NPN 5 m (16.25 ft) cable, 4 wire QMH26VNLPQ7 M8 Pico QD connector, 4-pin QMH26VPLP-5M Complementary PNP 5 m (16.25 ft) cable, 4 wire QMH26VPLPQ7 M8 Pico QD connector, 4-pin QMH26ENXLPC-5M Expert™ Coaxial Polarized Retroreflective 2.6 m (8.5 ft) with BRT-60X40C NPN 5 m (16.25 ft) cable, 4 wire QMH26ENXLPCQ7 M8 Pico QD connector, 4-pin QMH26EPXLPC-5M PNP 5 m (16.25 ft) cable, 4 wire QMH26EPXLPCQ7 M8 Pico QD connector, 4-pin QMH26VNAF400-5M Adjustable Field Background Suppression 5 to 400 mm (0.2 in to 15.7 in) Complementary NPN 5 m (16.25 ft) cable, 4 wire QMH26VNAF400Q7 M8 Pico QD connector, 4-pin QMH26VPAF400-5M Complementary PNP 5 m (16.25 ft) cable, 4 wire QMH26VPAF400Q7 M8 Pico QD connector, 4-pin QMH26VNAF200-5M Adjustable Field Background Suppression (small light spot) 5 to 200 mm (0.2 in to 7.85 in) Complementary NPN 5 m (16.25 ft) cable, 4 wire QMH26VNAF200Q7 M8 Pico QD connector, 4-pin QMH26VPAF200-5M Complementary PNP 5 m (16.25 ft) cable, 4 wire QMH26VPAF200Q7 M8 Pico QD connector, 4-pin Overview QMH26 QM26 Key 1 2 1 1. Green Indicator Yellow Indicator 3. Push Button Adjustment Screw/Potentiometer (not shown)—AFxxx models 4. Optical Window QM26 and QMH26 Series Sensors 2 www.bannerengineering.com - Tel: +1-763-544-3164 P/N 166534 Rev. E

Install the sensor so that the object to be detected moves horizontally to the sensor. Wiring Diagrams 10-30V dc Remote Programming Load Expert™ NPN 10-30V dc Remote Programming Load Expert™ PNP Wiring Key 1 = Brown 2 = White 3 = Blue 4 = Black 10-30V dc

4 Load

2 N.C. QM26— Emitters Sensor Configuration

  • Adjustable field background suppression models (AFxxx models) have an 8-turn adjustment screw (potentiometer) to set the background suppression distance.
  • Expert™ coaxial polarized retroreflective models (XLPC models) are configurable using either the sealed push button or the remote input wire. Two-lens polarized retroreflective models (LP models) and opposed mode models require no user adjustments. Sensor Setup - Background Suppression—AFxxx Models Background Suppression Mode: Objects beyond the set cutoff distance will not be detected. Background suppression mode can be used in most situations with varying object colors and positions or with varying background conditions. To ensure reliable background suppression, a minimum separation distance between the object and the background is necessary. See Figure 5 on page 10 to determine the minimum separation distance. QM26 and QMH26 Series Sensors P/N 166534 Rev. E www.bannerengineering.com - Tel: +1-763-544-3164 3

Not available Connect the remote input wire to +V dc for 4 ms or longer. The push button is disabled (locked). Not available Disconnect the remote input wire from +V dc. The push button is enabled (unlocked). procedure to configure the sensor. remote input wire to ground for 2000 to 3000 ms. Push button only: The green LED flashes. the reflector is required for reliable detection.

  • High sensitivity (11% offset)—suitable for highly transparent bottles, thin films, and foils. See Light SET for High Sensitivity on page 5.
  • Medium sensitivity (18% offset)—suitable for standard bottle types and translucent objects. See Light SET for Medium Sensitivity on page 6. Darkest (no signal) Most Light (saturated signal) Output ON Output OFF Single Presented Condition Sensor positions threshold ≈ X % below the presented condition

Figure 3. Light SET (Dark Operate Shown) Use High Sensitivity (11% sensitivity) for detecting highly transparent bottles, thin films, and foils with a thickness of more than 20 µm. Use either the button or the remote input wire procedure to configure the sensor.

Clear the light path to the reflector. Clear the light path to the reflector. remote input wire to ground for 4 to 1000 ms. remote input wire procedure to configure the sensor. Clear the light path to the reflector. Clear the light path to the reflector. remote input wire to ground for 1000 to 2000 ms. medium sensitivity Light SET. Figure 4. Dark SET (Dark Operate Shown)

Dark SET for Maximum Operating Range Use either the button or the remote input wire procedure to configure the sensor. Push Button Remote Input Wire Result Block the light path to the reflector. Block the light path to the reflector. Press the button for 2 to 7 seconds until the LEDs flash simultaneously, then release the button. 2 to 7 sec. Pulse the remote input wire to +V dc, then pull the remote input wire to ground for 4 to 1000 ms. Pulse the remote input wire to +V dc to complete the Dark SET. t = 0 +Vdc Teach 4 ... 1000 ms t t Push button only: The green and yellow LEDs flash simultaneously. LED Yellow LED Green SIMULTANEOUS Flashing at 3Hz The sensor is configured for Dark SET (maximum operating range). Clear the light path to the reflector. Clear the light path to the reflector. The sensor is ready for use. QM26 and QMH26 Series Sensors P/N 166534 Rev. E www.bannerengineering.com - Tel: +1-763-544-3164 7

Supply Voltage and Current 10 to 30 V dc (10% maximum ripple within specified limits); supply current (exclusive of load current) < 20 mA Note: For UL applications: For use in class 2 circuits only. Supply Protection Circuitry Protected against reverse polarity and transient voltages Output Configuration XLPC models: Single PNP or NPN on pin 4 (black wire) with remote input on pin 2 (white wire) All other models: Complementary PNP or NPN by model number Delay Before Power-Up < 300 ms Output Rating 100 mA per output Off-state leakage current for load = 1500 Ω : NPN: < 200 μ A PNP: < 500 μ A ON-state saturation voltage: < 2 V at 100 mA Output Protection Circuitry Protected against false pulse at power up, and overload or short circuit of outputs Emitter LED Wavelength AF200 models: 660 nm All other models: 620 nm Required Overcurrent Protection WARNING: Electrical connections must be made by qualified personnel in accordance with local and national electrical codes and regulations. Overcurrent protection is required to be provided by end product application per the supplied table. Overcurrent protection may be provided with external fusing or via Current Limiting, Class 2 Power Supply. Supply wiring leads < 24 AWG shall not be spliced. For additional product support, go to www.bannerengineering.com. Supply Wiring (AWG) Required Overcurrent Protection (Amps) 20 5.0 22 3.0 24 2.0 26 1.0 28 0.8 30 0.5 Output Response Time 500 µs Repeatability QM26—Opposed Models: 110 μ s All other models: 150 μ s Indicators Green on: Power ON and sensor ready Yellow on: Light sensed XLPC models—Yellow flashing: Light sensed but marginal signal Construction Housing: 316L stainless steel Optical Window: Coated acrylic (PMMA) Indicator and buttons: TPV - PE Connection 4-wire 5 m (16.25 ft) cable or 4-pin M12 Euro-style quick disconnect connector with 200 mm (7.5 in) PVC pigtail, depending on model Banner recommends using the 4-Pin Threaded M12/Euro-Style Cordsets— Washdown, Stainless Steel cordsets listed in the Accessories section. Note: These proximity switches shall be used with UL Listed Cable assemblies rated 30 V, 0.24 A minimum, in the field installation. Adjustments QM26 Emitter— Beam Enable: Connect black wire to +V dc to activate emitter LED AFxxx models—Adjustment Screw: Sets background suppression distance XLPC models—Push Button: User set up XLPC models—Remote Input Wire: Remote PLC set up and push button lock out Environmental Rating IEC IP67 and IEC IP69K Chemical Compatibility ECOLAB® certified Operating Conditions Operating Temperature and Storage Temperature: –30 °C to +70 °C (–22 °F to +158 °F) Note: UL certified in the temperature range –30 °C Humidity: Periodic exposure to 100% humidity and washdown cleaning Vibration and Shock IEC60947-5-2 Certifications with class 2 power supply QM26 and QMH26 Series Sensors 8 www.bannerengineering.com - Tel: +1-763-544-3164 P/N 166534 Rev. E

All measurements are listed in millimeters [inches], unless noted otherwise. QMH26 Dimensions All measurements are listed in millimeters [inches], unless noted otherwise. QM26 and QMH26 Series Sensors P/N 166534 Rev. E www.bannerengineering.com - Tel: +1-763-544-3164 9

Figure 14. Adjustable Field Models (AFxxx Models) All measurements are listed in millimeters, unless noted otherwise.

4-Pin Threaded M12/Euro-Style Cordsets Cable: PVC jacket, PUR (polyurethane) connector body, nickel-plated brass coupling nut Conductors: 22 AWG, gold-plated contacts Conductors: 22 AWG, gold-plated contacts Voltage/Current Rating: 250 V ac/dc, 4.0 A Temperature: –40 °C to +105 °C (–40 °F to +221 °F) Environmental Rating: IP67/IP69K 4-Pin Threaded M12/Euro-Style Cordsets Model Length Style Dimensions Pinout (Female) MQDC-406 1.83 m (6 ft) Straight 44 Typ. ø 14.5 M12 x 1 1 = Brown 2 = White 3 = Blue 4 = Black MQDC-415 4.57 m (15 ft) MQDC-430 9.14 m (30 ft) MQDC-450 15.2 m (50 ft) Cordsets for QMH26 Models with suffix Q7 All measurements are listed in millimeters, unless noted otherwise. 4-Pin Threaded M8/Pico-Style Cordsets Model Length Style Dimensions Pinout (Female) PKG4M-2 2 m (6.56 ft) Straight ø 9.5 35 Typ. M8 x 1 3 1 1 = Brown 2 = White 3 = Blue 4 = Black PKG4M-5 5 m (16.4 ft) PKG4M-9 9 m (29.5 ft) PKW4M-2 2 m (6.56 ft) Right Angle ø 9.5 28 Typ. 20 Typ. M8 x 1 PKW4M-5 5 m (16.4 ft) PKW4M-9 9 m (29.5 ft) Brackets for QM26 Models All measurements are listed in millimeters, unless noted otherwise. SMBLSTDLQ26 Adjustable right-angle metal bracket

  • 304 stainless steel 15 15 SMBLSTQ26 Right-angle bracket
  • 304 stainless steel Brackets for QMH26 Models All measurements are listed in millimeters, unless noted otherwise. QM26 and QMH26 Series Sensors 14 www.bannerengineering.com - Tel: +1-763-544-3164 P/N 166534 Rev. E
  • Setscrew adjustment of sensor
  • 316L stainless steel ø 12 150 ø 22 Retroreflectors All measurements are listed in millimeters, unless noted otherwise. BRT-60X40C Rectangular, acrylic target
  • Reflectivity Factor: 1.4 Temperature: –20 °C to +60 °C (–4 °F to +140 °F)
  • Optional brackets are available Approximate size: 40 mm × 60 mm BRT-92X92C Square, acrylic target
  • Reflectivity Factor: 3.0 Temperature: –20 °C to +60 °C (–4 °F to +140 °F)
  • Optional brackets are available Approximate size: 92 mm × 92 mm BRT-40X19A Rectangular, acrylic target
  • Reflectivity Factor: 1.3 Temperature: –20 °C to +60 °C (–4 °F to +140 °F)
  • Approximate size: 19 mm × 60 mm overall; 19 mm × 40 mm reflector BRT-60X40IP69K Rectangular, acrylic target (color is amber)
  • Reflectivity Factor: 0.7 Temperature: –20 °C to +140 °C (–4 °F to +284 °F)
  • Chemically resistant
  • IP69K washdown rated
  • Optional brackets are available Approximate size: 40 mm × 60 mm BRT-60X40C-PS Rectangular, polystyrene target
  • Reflectivity Factor: 1.1 Temperature: –20 °C to +60 °C (–4 °F to +140 °F)
  • Optional brackets are available Chemically compatible with hydrogen peroxide Yellow back
  • Approximate size: 40 mm × 60 mm BRT-40X19A-PS Rectangular, polystyrene target
  • Reflectivity Factor: 1.0 Temperature: –20 °C to +60 °C (–4 °F to +140 °F)
  • Chemically compatible with hydrogen peroxide Yellow back
  • Approximate size: 19 mm × 60 mm overall; 19 mm × 40 mm reflector Model Reflectivity Factor Maximum Temperature Size BRT-THG-2-100 0.7 +60 °C (+140 °F) 50 mm (2 in) wide, 2.5 m (100 in) long QM26 and QMH26 Series Sensors P/N 166534 Rev. E www.bannerengineering.com - Tel: +1-763-544-3164 15

Banner Engineering Corp. Limited Warranty Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product. THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE. This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE. Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously manufactured by Banner Engineering Corp. Any misuse, abuse, or improper application or installation of this product or use of the product for personal protection applications when the product is identified as not intended for such purposes will void the product warranty. Any modifications to this product without prior express approval by Banner Engineering Corp will void the product warranties. All specifications published in this document are subject to change; Banner reserves the right to modify product specifications or update documentation at any time. Specifications and product information in English supersede that which is provided in any other language. For the most recent version of any documentation, refer to: www.bannerengineering.com. QM26 and QMH26 Series Sensors © Banner Engineering Corp. All rights reserved