QH01-0016-G MA-COM | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
Features
- Small Size and Low Profile
- Typical Insertion Loss 0.7 dB
- Typical Amplitude Balance 0.3 dB
- 1 Watt Power Handling
- SOT-26 Package
Description
M/A-COM’s QH01-0016-G is an IC-based monolithic power divider using M/A-COM’s GMIC technology in a low cost SOT-26 plastic package. This Quad Hy- brid is ideally suited for applications where small size, low insertion loss, superior phase/amplitude tracking and low cost are required. Typical applications include base station switching networks and other cellular applications where size and PCB real estate are at a premium. Available in Tape and Reel. The QH01-0016-G is fabricated using a passive- integrated circuit process. The process features full- chip passivation for in creased performance and reliability.
Ordering Information
QH01-0016-G Bulk Packaging QH01-0016-G-TR 1000 piece reel Note: Reference Application Note M513 for reel size information. Functional Block Diagram Pin Configuration Pin No. Function Pin No. Function
1 RF IN 4 0º OUTPUT
2 GND 5 GND
3 ISOLATED 6 90º OUTPUT
Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Low Cost GMIC SMT Quad Hybrid 800 - 905 MHz Rev. V3 QH01-0016-G ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. Electrical Specifications: TA = 25°C, Z0 = 50Ω Parameter Units Min Typ Max Insertion Loss above 3.0 dB dB — 0.7 1.2 Isolation dB 14 17 — VSWR Input RF1, RF2 Outputs 1.3:1 1.35:1 1.5:1 1.5:1 Amplitude Balance dB — 0.3 0.7 Phase Balance Deg — 1.5 6 Recommended PCB Configuration Absolute Maximum Ratings 1,2 Parameter Absolute Maximum Input Power3 1 W CW Operating Temperature -40°C to +85°C Storage Temperature -65°C to +150°C 1. Exceeding any one or combination of these limits may cause permanent damage to this device. 2. M/A-COM does not recommend sustained operation near these survivability limits. 3. With internal load dissipation of 0.125 W Maximum. Handling Procedures Please observe the following precautions to avoid damage: Static Sensitivity GMIC Circuits are sens itive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices.
Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Low Cost GMIC SMT Quad Hybrid 800 - 905 MHz Rev. V3 QH01-0016-G ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. Amplitude Balance vs. Frequency VSWR vs. Frequency Isolation vs. Frequency Typical Performance Curves @ 25ºC Phase Balance vs. Frequency Insertion Loss vs. Frequency
Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Low Cost GMIC SMT Quad Hybrid 800 - 905 MHz Rev. V3 QH01-0016-G ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. SOT-26† † Reference Application Note M538 for lead-free solder reflow recommendations.