QF-XM MICRODC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

http://www.microdc.cn Technical Enquiries-Email:tech@microdc.cn Tel:0086-20-86000646 Page of PRODUCT PRODUCT PROGRAM PROGRAM Model Input Voltage (V) Output Voltage (V) Output Current max M Isolation (VDC) Max Capacitive Load (uF) E QFQF ici ency (%) QF0503XM 4.5-5.5 3.3 75.7 3000 100 QF0505XM 4.5-5.5 3000 100 QF0507XM 4.5-5.5 7.2 34.72 3000 100 QF0509XM 4.5-5.5 27.77 3000 100 QF0512XM 4.5-5.5 20.83 3000 100 QF0515XM 4.5-5.5 16.67 3000 100 QF0518XM 4.5-5.5 13.88 3000 100 QF0524XM 4.5-5.5 10.41 3000 100 QF1203XM 10.8-13.2 3.3 75.7 3000 100 QF1205XM 10.8-13.2 3000 100 QF1207XM 10.8-13.2 7.2 34.72 3000 100 QF1209XM 10.8-13.2 27.77 3000 100 QF1212XM 10.8-13.2 20.83 3000 100 QF1215XM 10.8-13.2 16.67 3000 100 QF1218XM 10.8-13.2 13.88 3000 100 QF1224XM 10.8-13.2 10.41 3000 100 QF2403XM 21.6-26.4 3.3 75.7 3000 100 QF2405XM 21.6-26.4 3000 100 QF2407XM 21.6-26.4 7.2 34.72 3000 100 QF2409XM 21.6-26.4 27.77 3000 100 QF2412XM 21.6-26.4 20.83 3000 100 QF2415XM 21.6-26.4 16.67 3000 100 QF2418XM 21.6-26.4 13.88 3000 100 QF2424XM 21.6-26.4 10.41 3000 100 MODEL MODEL SELECTION SELECTION Q Q F F X X M M Product Series Input Voltage Output Voltage Fixed Input Mini S IP Package MICRODC RESERVES THE COPYRIGHT 0.25W, FIXED INPUT , ISOLATED&UNREGULATED SINGLE OUTPUT DC-DC CONVERTER

FEATURES

72% Operating temperature -40 to +85 Input/Output isolation 3000VDC Pin compatible with multiple m anufacturers

APPLICATIONS

such, pecifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by microdc refer to www. microdc n for the most current product specifications. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. Mechanical drawings and specifications are for reference only. All specifications are measured at an ambient temperature of humidity<75%,nominal input voltage and at rated output load unless otherwise specified. microdc may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. This product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such datasheet. Warranty is in accordance with microdc s Standard Terms of Sale available at www. microdc n

http://www.microdc.cn Technical Enquiries-Email:tech@microdc.cn Tel:0086-20-86000646 Page of Input Input Specifications Specifications Conditions Parameters Nominal Typical Maximum Units Voltage range 4.5-5.5 VDC 10.8-13.2 13.5 16.5 21.6-26.4 Filter Capacitor Turn on transient process time ms Start up time 200 ms Absolute maximum rating Vin VDC Vi n Vin Vin Peak input voltage time 100 ms Output Output Specifications Specifications Parameters Conditions Typical Maximum Units Voltage accuracy Short circuit protection Momentary (1sec) Line voltage regulation For change of Vin 1.2 of Vi n Load voltage regulation Load 100 Load voltage regulation 3.3V output model Load 100 Temperature coefficient 0.02 C Ripple noise At 20MHz Bandwidth 100 mV p-p Capacitive load 100 μ F Rising time ms General General Specifications Specifications Parameters Parameters Conditions Conditions Typical Typical Maximum Maximum Units Units Switching frequency 100% load KHz Operating temperature Without deratin g -40 +85 Storage temperature -40 +125 Maximum case temperature 100 Cooling Free air convection Humidity Case material Non-conductive black plastic Weight 1.5 F g Dimensions (Lx W x 0.46 x 0.24 x 0.38 inches 11.68 x 6.00 x 9.65 mm MTBF 010 000 hrs (MIL-HDBK -217F, Ground Benign, t=+25 NOTE: NOTE: All All specifications specifications in in this this data data sheet sheet are are measured measured at at an an ambient ambient temperature temperature of of humidity<75%, humidity<75%, nominal nominal input input voltage voltage and and at at rated rated output output load load unless unless otherwise otherwise specified specified

http://www.microdc.cn Technical Enquiries-Email:tech@microdc.cn Tel:0086-20-86000646 Page of Microdc Professional Power Module,Inc. Tel:0086-20-86000646 E-mail:tech@microdc.cn Website:http://www.microdc.cn Microdc Professional Power module,Inc.makes no representation that the use of its products in the circuits described herein, or the use of other technical information contained herein, will not infringe upon existing or future patent rights. Specifications are subject to change without notice. 2010 Microdc Professional Power Module, Inc. Guangzhou RoHS COMPLIANT INFORMATION This series is compatible with RoHS soldering systems with a peak wave solder temperature of 300 C for seconds. The pin termination finish on the SIP package type is Tin Plate, Hot Dipped over Matte Tin with Nickel Preplate. The DIP types are Matte Tin over Nickel Preplate. Both types in this series are backward compatible with Sn/Pb soldering systems. REACH COMPLIANT INFORMATION This series has proven that this product does not contain harmful chemicals, it also has harmful chemical substances through the registration, inspection and approval. Dimensions Dimensions Pin Pin Out Out Specifications Specifications Pin Single V Input Input V Output Output Recommended Recommended footprint footprint details details PIN PIN SIP SIP Package Package Isolation Isolation Specifications Specifications Conditions Parameters Conditions Typical Rated Units Tested I/O voltage sec 3000 VDC Resistance 1000 MOhm Capacitance pF TUBE TUBE OUTLINE OUTLINE DIMENSIONS DIMENSIONS PIN PIN SIP SIP Tube Tube Unless otherwise stated all dimensions in inches (mm) 0.5mm. Tube length Pin SIP) 20.47 (520mm 2mm). Tube Quantity :25