Q8R9SKK

Q8-SERIES APEM | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 7

Technical content

• Plated brass bezel finished in bright chrome, black or satin grey and moulded polycarbonate rear body
• Stainless Steel 316L bezel in flush version only MATERIALS
• Max Reverse Voltage: 5 V
• Viewing Angle: 30–100° (dependant on model)
• Life Expectancy: 100,000 hours
• Torque: 20 to 25 cNm
• Maximum panel thickness 7 mm GENERAL SPECIFICATIONS The company reserves the right to change specifications without notice. 5mm colored diffused epoxy lens or 5 mm water clear super bright LEDs Prominent, recessed and flush bezel styles (2.8 x 0.8) solder lug/faston terminals, pins or (200 mm long) wire terminations (2.0 x 0.5) solder lug/faston terminals on tri-color versions DISTINCTIVE FEATURES
• IP67 sealing option (EN60529)
• Operating & Storage Temperature Range: Rear plastic body: -30 °C to +65 °C ( –22 °F to +149 °F) Rear epoxy body: -40 °C to +85 °C ( –40 °F to +185 °F) ENVIRONMENTAL SPECIFICATIONS Q8 series Ø8 mm panel mount LED indicators MOUNTING All LED characteristics are dependent upon environmental conditions. Therefore published data should be considered nominal and subject to variations. LED INDICATORS IND-Q8-1911

Ø8 mm panel mount LED indicators Q8 series ELECTRICAL SPECIFICATIONS Voltage Operating Voltage Operating Current (Min to Max) (Typical All Types) 02 (No Resistor)* 1.8 to 3.3 VDC 20 mA max 6 VDC 5.4 to 6.6 VDC 20 mA 12 VDC 10.8 to 13.2 VDC 20 mA 24 VDC 21.6 to 26.4 VDC 20 mA 28 VDC 25.2 to 30.8 VDC 20 mA

110 VAC 99 to 121 VAC 6 mA

220 VAC 207 to 235 VAC 3 mA

• Customer to supply resistor for desired operating current. LED COMPONENT SPECIFICATIONS Prominent and Recessed Flush Forward Voltage HE Red 80 mcd 8 mcd 2.0 V Green 60 mcd 6 mcd 2.2 V Yellow 50 mcd 6 mcd 2.1 V Blue 1,600 mcd 50 mcd 3.3 V White 1,600 mcd 500 mcd 3.3 V Orange 60 mcd 110 mcd 2.2 V Bi-color (Typical) (Red/Green) 14/30 mcd 15/10 mcd 2.0V/2.2 V Tri-color (Typical) (Red/Green/Yellow) 60/15/13 mcd 15/10/6 mcd 2.0 V/2.2 V/2.1 V Bi-color - The color is changed by reversing the polarity of the supply voltage. Tri-color - The indicator has red and green LEDs, when both connected yellow is produced. STANDARD LED INTENSITY LED COMPONENT SPECIFICATIONS Prominent and Recessed Flush Forward Voltage HE Red 5,000 mcd 1,300 mcd 2.2 V Green 10,000 mcd 1,200 mcd 3.3 V Yellow 4,000 mcd 350 mcd 2.0 V Blue 2,200 mcd 280 mcd 3.3 V White 2,500 mcd 950 mcd 3.3 V Orange 4,000 mcd 500 mcd 2.2 V SUPER BRIGHT LED INTENSITY LED COMPONENT SPECIFICATIONS Prominent and Recessed Flush Forward Voltage HE Red 6,000 mcd 980 mcd 2.2 V Green 1,900 mcd 300 mcd 3.3 V Yellow 1,600 mcd 250 mcd 2.0 V Orange 2,400 mcd 110 mcd 2.2 V HYPER BRIGHT LED INTENSITY
• The operating voltage must not be exceeded by more that 10% as this will result in reduced life expectancy
• Luminous intensity is measured at 20 mA on a discrete led unless otherwise stated.
• Luminous intensities and color shades of white LEDs may vary within a batch.
• Luminous intensity will be reduced with lower operating current. LED INDICATORS

Ø8 mm panel mount LED indicators Q8 series LED COLOR XX Fixed Light KK Flashing Light (12V – 28VDC) YY Bi-color ZZ Tri-color TYPE OF ILLUMINATION 02 no resistor* 06 6 VDC 12 12 VDC 12A 12 VAC/DC 24 24 VDC 24A 24 VAC/DC 28 28 VDC 28A 28 VAC/DC 110 110 VAC 220 220 VAC VOLTAGE (Blank) Unsealed E IP67 SEALING

1 Solder Lug/ Fastons

(2.8 x 0.8)

2 Pins

3 Wires

4 Rear epoxy Pins

5 Rear epoxy Wires

6 Short body Pins

7 Short body Wires

8 Short body Lug/ Fastons

(2.8 x 0.8) Extended short body solder Lug/ Fastons (2.8 x 0.5) C Bright Chrome B Black G Satin Grey S Stainless Steel 316L* *Flush version only SERIES Q MOUNTING HOLE 8 Ø8 mm P Prominent R Recessed F Flush BEZEL STYLE TERMINALS BEZEL FINISH R Red G Green Y Yellow B Blue W White O Orange HR Hyper Bright Red HG Hyper Bright Green HY Hyper Bright Yellow HO Hyper Bright Orange SR Super Bright Red SG Super Bright Green SY Super Bright Yellow SB Super Bright Blue SW Super Bright White SO Super Bright Orange RG Red/Green RY Red/Yellow GY Green/Yellow RYG Red/Yellow/ Green ABOUT THIS SERIES Notice: please note that not all combinations of above numbers are available. * please refer to the forward voltage in electrical specifications

• Gold faston terminal denotes anode (+), silver terminal denotes cathode (-)
• Standard wire length is 200 mm, 24 AWG UL1061, red wire denotes anode (+), black wire denotes cathode (-) for other wire lengths consult APEM
• 110 VAC and 220 VAC, only available with terminal options 1, 3 and 5
• Terminal options 2,6,8 & 9 are only available without integral resistor. Tri-color not available with terminal 9
• Bi-color leds, by connecting the gold faston (+) one color is produced, by reversing the supply voltage another color is produced – bi-colors are available up to 28 VDC [AC products not available]
• Take care when soldering to the faston terminals (recommended solder temperature 300 °C - 3 sec)
• We recommend using hyperbright or superbright leds for use at

110 VAC and 220 VAC

• Mains voltage product is not recommended for use on 3 phase appliances
• The tri-color led has red and green leds when both are connected yellow is produced
• Standard tri-color faston terminals are two anodes (+) and one cathode (-)
• Tri-color wires are one red (+) and one green (+) anode and one black (-) cathode
• Tri-color pins are center (–) cathode, shortest (+) anode pin green, longest (+) anode pin red LED INDICATORS

PROMINENT BEZEL SOLDER LUG/FASTON Ø8 mm panel mount LED indicators Q8 series LED INDICATORS

REAR EPOXY PINS REAR EPOXY WIRES WIRES PINS SOLDER LUG/FASTON FLUSH BEZEL Ø8 mm panel mount LED indicators Q8 series SHORT BODY SOLDER LUG/FASTONS EXTENDED SHORT BODY SOLDER LUG/FASTONS PROMINENT BEZEL (CONTINUED) LED INDICATORS

SOLDER LUG/FASTONRECESSED BEZEL Ø8 mm panel mount LED indicators Q8 series SHORT BODY WIRES SHORT BODY PINS SHORT BODY SOLDER LUG/FASTONS EXTENDED SHORT BODY SOLDER LUG/FASTONS FLUSH BEZEL (CONTINUED) LED INDICATORS

SHORT BODY WIRES SHORT BODY PINS REAR EPOXY WIRES SHORT BODY SOLDER LUG/FASTONS EXTENDED SHORT BODY SOLDER LUG/FASTONS RECESSED BEZEL (CONTINUED) Ø8 mm panel mount LED indicators Q8 series LED INDICATORS