LBW5SG ETC1 | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 14
Technical content
Features
package: white SMD package, colorless clear feature of the device:point lightsource with high luminous efficiency and low space wavelength:470 nm (blue), 503 nm (verde) viewing angle:Lambertian Emitter (120°) technology:InGaN optical efficiency:6 lm/W (blue), 25 lm/W (verde) grouping parameter:luminous intensity, wavelength assembly methods: suitable for all SMT assembly methods soldering methods:IR reflow soldering preconditioning:acc. to JEDEC Level 4 taping:24-mm tape with 800/reel, ø180 mm ESD-withstand voltage:u pt o2k Va c c .t o JESD22-A114-B
Applications
traffic lights (verde) backlighting (LCD, switches, keys, displays, illuminated advertising, general lighting) interior automotive lighting (e.g. dashboard backlighting, etc.) substitution of micro incandescent lamps marker lights (e.g. steps, exit ways, etc.) signal and symbol luminaire scanners
LB W5SG, LV W5SG Anm.: -35 gesamter Farbbereich, Lieferung in Einzelgruppen (sieheSeite 5) Note: -35 Total color tolerance range, delivery in single groups (please seepage 5) Bestellinformation
Ordering Information
Lichtstrom1) Seite 14 Luminous Flux page 14 IF = 350 mA Φ V (mlm) Lichtstärke2) Seite 14 Luminous Intensity2) page 14 IF = 350 mA IV (mcd) Bestellnummer Ordering Code LB W5SG-DYEZ-35 blue 5200... 11200 2700 (typ.) Q65110A1470 LV W5SG-GYHY-35 verde 21000 ... 45000 11000 (typ.) Q65110A1458
LB W5SG, LV W5SG 2003-10-29 3 Grenzwerte Maximum Ratings Bezeichnung Parameter Symbol Symbol Werte Values Einheit Unit Betriebstemperatur Operating temperature range Top – 40 … + 100 °C Lagertemperatur Storage temperature range Tstg – 40 … + 100 °C Sperrschichttemperatur Junction temperature Tj 110 °C Durchlassstrom Forward current TA=25°C) IF 500 mA Stoßstrom Surge current t≤ 10 µs,D = 0.005,TA=25°C IFM 1500 mA Sperrspannung3)Seite 14 Reverse voltage3) page 14 (TA=25°C) VR 1.2 V Leistungsaufnahme Power consumption (TA=25°C) Ptot 1.5 W W ärmewiderstand4)Seite 14 Thermal resistance4) page 14 Sperrschicht/Lötpad Junction/solder point Rth JS 9K / W
LB W5SG, LV W5SG * Einzelgruppen siehe Seite 5 Individual groups on page 5 Kennwerte Characteristics (TA =2 5°C) Bezeichnung Parameter Symbol Symbol Werte Values Einheit Unit LB LV Wellenlänge des emittierten Lichtes (typ.) Wavelength at peak emission IF =3 5 0m A λpeak 465 501 nm Dominantwellenlänge5)Seite 14 Dominant wavelength5) page 14 IF =3 5 0m A λdom 470* 503* nm Spektrale Bandbreite bei 50 %Irel max (typ.) Spectral bandwidth at 50 %Irel max IF =3 5 0m A ∆λ 25 30 nm Abstrahlwinkel bei 50 %IV (Vollwinkel) (typ.) Viewing angle at 50 %IV 2ϕ 120 120 Grad deg. Durchlassspannung6)Seite 14 (min.) Forward voltage6) page 14 (typ.) IF = 350 mA (max.) VF VF VF 3.1 3.8 4.0 3.1 3.8 4.0 V V V Sperrstrom Reverse current (max.) VR =1 . 2V IR 100 100 µA Temperaturkoeffizient vonλpeak (typ.) Temperature coefficient ofλpeak IF =3 5 0m A ;–10°C ≤ T ≤ 100°C TC λpeak 0.05 0.03 nm/K Temperaturkoeffizient vonλdom (typ.) Temperature coefficient ofλdom IF =3 5 0m A ;–10°C ≤ T ≤ 100°C TC λdom 0.04 0.05 nm/K Temperaturkoeffizient vonVF (typ.) Temperature coefficient ofVF IF =3 5 0m A ;–10°C ≤ T ≤ 100°C TC V – 5.0 – 3.6 mV/K Optischer Wirkungsgrad (typ.) Optical efficiency IF =3 5 0m A ηopt 62 5 l m / W
LB W5SG, LV W5SG 2003-10-29 5 Anm.: Die Standardlieferform von Serientypen beinhaltet eine Familiengruppe. Diese besteht aus 4 Helligkeitsdrittelgruppen. Einzelne Helligkeitsdrittelgruppen sind nicht bestellbar. Note: The standard shipping format for serial types includes a family group of 4 individual brightness third groups. Individual brightness third groups cannot be ordered. Anm.: In einer Verpackungseinheit / Gurt ist immer nur eine Gruppe für jede Selektion enthalten. Note: No packing unit / tape ever contains more than one group for each selection. Wellenlängengruppen (Dominantwellenlänge)5)Seite 14 Wavelength Groups (Dominant Wavelength)5) page 14 Gruppe Group blue verde Einheit Unitmin. max. min. max. 3 463 467 497 501 nm 4 467 471 501 505 nm 5 471 475 505 509 nm Helligkeits-Gruppierungsschema Brightness Groups Helligkeitsdrittelgruppe Brightness Third Group Lichtstrom1)Seite 14 Luminous Flux1) page 14 Φ V (mlm) Lichtstärke2)Seite 14 Luminous Intensity2) page 14 IV (mcd) DY DZ EX EY EZ GY GZ HX HY 5200 … 6100 6100 … 7100 7100 … 8200 8200 … 9700 9700 … 11200 21000… 24000 24000 … 28000 28000 … 33000 33000 … 39000 1800 (typ.) 2200 (typ.) 2500 (typ.) 2900 (typ.) 3400 (typ.) 7500 (typ.) 8600 (typ.) 10100 (typ.) 12000 (typ.) Gruppenbezeichnung auf Etikett Group Name on Label Beispiel: GY-4 Example: GY-4 Helligkeitsdrittelgruppe Brightness Third Group Wellenlänge Wavelength GY 4
LB W5SG, LV W5SG Relative spektrale Emission2)Seite 14 Relative Spectral Emission2) page 14 V(λ) = spektrale Augenempfindlichkeit / Standard eye response curve Irel= f(λ);TA =2 5°C; IF = 350 mA Abstrahlcharakteristik2) Seite 14 Radiation Characteristic2) page 14 Irel= f(ϕ);TA =2 5°C 400 550 450 500 600 650 nm λ 700 OHL02050 I 100 rel verde blue λV 0.2 0.4 1.0 0.8 0.6 ϕ 1.0 0.8 0.6 0.4 50˚ 60˚ 70˚ 80˚ 90˚ 100˚
LB W5SG, LV W5SG 2003-10-29 7 Durchlassstrom2)Seite 14 Forward Current2) page 14 IF = f(VF);TA =2 5° C Relative Lichtstärke2)Seite 14 Relative Luminous Intensity2) page 14 IV/IV(25 °C)= f(TA);IF = 350 mA Relative Lichtstärke2) 7)Seite 14 Relative Luminous Intensity2) 7) page 14 IV/IV(350 mA) = f(IF);TA =2 5° C OHL00830 10-2 mA IF VF 2.0 100 V 10-1 OHL02637 -60 T V (25 ˚C)I IV -40 -20 0 20 40 60 100 0.2 0.4 0.6 0.8 1.0 1.2 1.4 true green blue verde OHL02051 110 mA 310 FI Φ V (350 mA) Φ V 102 101 -110 010 blue verde
LB W5SG, LV W5SG 2003-10-29 8 Dominante Wellenlänge2)Seite 14 Dominant Wavelength2) page 14 LB ,λdom = f(IF);TA =2 5°C Maximal zulässiger Durchlassstrom Max. Permissible Forward Current IF = f(T) Dominante Wellenlänge2)Seite 14 Dominant Wavelength2 page 14) LV ,λdom = f(IF);TA =2 5°C 100 200 300 400 500 0 20 40 60 80 100 T Ambient [°C] If [mA]
LB W5SG, LV W5SG 2003-10-29 9 Zulässige ImpulsbelastbarkeitIF = f(tp) Permissible Pulse Handling Capability Duty cycleD = parameter,TA=2 5°C, LB Zulässige ImpulsbelastbarkeitIF = f(tp) Permissible Pulse Handling Capability Duty cycleD = parameter,TA=2 5°C, LV Zulässige ImpulsbelastbarkeitIF = f(tp) Permissible Pulse Handling Capability Duty cycleD = parameter,TA=8 5°C, LB Zulässige ImpulsbelastbarkeitIF = f(tp) Permissible Pulse Handling Capability Duty cycleD = parameter,TA=8 5°C, LV
LB W5SG, LV W5SG Ma ßzeichnung8)Seite 14 Package Outlines8) page 14 Kathodenkennung: Markierung Cathode mark: mark Gewicht / Approx. weight: 200 mg Gurtung / Polarität und Lage8)Seite 14 Verpackungseinheit 800/Rolle,ø180 mm Method of Taping / Polarity and Orientation8) page 14 Packing unit 800/reel,ø180 mm GPLY6192 6.2 (0.244) 5.8 (0.228) 1.9 (0.075) 1.7 (0.067) Cathode R1.5 (0.059) 11.2 (0.441) 10.8 (0.425) 1.2 (0.047) 0.8 (0.031) 0.29 (0.011) 0.24 (0.009) 6.8 (0.268) 7.2 (0.283) 1.0 (0.039) 0.8 (0.031) 1.6 (0.063) 2.0 (0.079) (ø4.2 (0.165)) Protection Heat sink A C Diode OHAY0508 4 (0.157) 6.35 (0.250) 8 (0.315) 1.75 (0.069) 11.5 (0.453) 12.4 (0.488) 24 (0.945) 0.3 (0.012) 0.3 (0.012) 1.9 (0.075) 7.35 (0.289) Protection Diode Heat sink C A
LB W5SG, LV W5SG 2003-10-29 11 Empfohlenes Lötpaddesign8)Seite 14 IR Reflow Löten Recommended Solder Pad 8) page 14 IR Reflow Soldering OHAY0681 3.0 (0.118) 14.4 (0.567) 3.0 (0.118) ø4.0 (0.157) 14.4 (0.567) 3.0 (0.118) 3.0 (0.118) ø4.0 (0.157) Lötstopplack Solder resist
3 Lötstellen
10 (0.394) 15.0 (0.591) 0.3 (0.012) Copper Kupfer Footprint Empfohlene Padgeometrie Recommended Solder Pad Design Achtung: Anode und Heatsink sind elektrisch verbunden Attention: Anode and Heatsink are electrically connected
LB W5SG, LV W5SG Lötbedingungen Vorbehandlung nach JEDEC Level 4 Soldering Conditions Preconditioning acc. to JEDEC Level 4 IR-Reflow Lötprofil (nach IPC 9501) IR Reflow Soldering Profile (acc. to IPC 9501) OHLY0597 50 100 150 200 250 100 150 200 250 300 T t C s 240-245 C 10-40 s 183 C 120 to 180 s defined for Preconditioning: up to 6 K/s ramp-down rate up to 6 K/s ramp-up rate up to 6 K/s defined for Preconditioning: 2-3 K/s
LB W5SG, LV W5SG 2003-10-29 13 Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. If printed or downloaded, please find the latest version in the Internet. Packing Please use the recycling operators known to you. We can also help you– get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose!Critical components 9)page 14may only be used in life-support devices or systems10)page 14with the express written approval of OSRAM OS. Revision History: 2003-10-29 Previous Version: - Page Subjects (major changes since last revision) Date of change
LB W5SG, LV W5SG 2003-10-29 14 Fußnoten: 1) Helligkeitswerte werden mit einer Stromeinprägedauer von 25 ms und einer Genauigkeit von± 11% ermittelt. 2) Wegen der besonderen Prozessbedingungen bei der Herstellung von LED können typische oder abgeleitete technische Parameter nur aufgrund statistischer Werte wiedergegeben werden. Diese stimmen nicht notwendigerweise mit den Werten jedes einzelnen Produktesüberein, dessen Werte sich von typischen und abgeleiteten Werten oder typischen Kennlinien unterscheiden können. Falls erforderlich, z.B. aufgrund technischer Verbesserungen, werden diese typischen Werte ohne weitere Ankündigung geändert. 3) Die LED kann in Sperrichtung kurzzeitig betrieben werden. 4) R thJA ergibt sich bei Montage auf PC-Board - Metallkernplatine, l = 1.3 W/(m*K), fürw e i t e r e Informationen siehe Applikationsschrift im Internet (www.osram-os.com). 5) Wellenlängen werden mit einer Stromeinprägedauer von 25 ms und einer Genauigkeit von ±1 nm ermittelt. 6) Spannungswerte werden mit einer Stromeinprägedauer von 1 ms und einer Genauigkeit von ±0,1 V ermittelt. 7) Im gestrichelten Bereich der Kennlinien muss mit erhöhten Helligkeitsunterschieden zwischen Leuchtdioden innerhalb einer Verpackungseinheit gerechnet werden. 8) Ma ße werden wie folgt angegeben: mm (inch). 9) Ein kritisches Bauteil ist ein Bauteil, das in lebenserhaltenden Apparaten oder Systemen eingesetzt wird und dessen Defekt voraussichtlich zu einer Fehlfunktion dieses lebenserhaltenden Apparates oder Systems führen wird oder die Sicherheit oder Effektivität dieses Apparates oder Systems beeinträchtigt. 10) Lebenserhaltende Apparate oder Systeme sind für( a ) die Implantierung in den menschlichen Körper oder (b) für die Lebenserhaltung bestimmt. Falls sie versagen, kann davon ausgegangen werden, dass die Gesundheit und das Leben des Patienten in Gefahr ist.Published by OSRAM Opto Semiconductors GmbH Wernerwerkstrasse 2, D-93049 Regensburg www.osram-os.com © All Rights Reserved. Remarks: 1) Brightness groups are tested at a current pulse duration of 25 ms and a tolerance of± 11%. 2) Due to the special conditions of the manufacturing processes of LED, the typical data or calculated correlations of technical parameters can only reflect statistical figures. These do not necessarily correspond to the actual parameters of each single product, which could differ from the typical data and calculated correlations or the typical characeristic line. If requested, e.g. because of technical improvements, these typ. data will be changed without any further notice. 3) Driving the LED in reverse direction is suitable for short term application. 4) R thJA results from mounting on PC board - metall core PCB, l = 1.3 W/(m*K), for further Information please find the application note on our web site (www.osram-os.com). 5) Wavelengths are tested at a current pulse duration of 25 ms and a tolerance of ±1 nm. 6) Forward voltages are tested at a current pulse duration of 1 ms and a tolerance of ±0.1 V. 7) In the range where the line of the graph is broken, you must expect higher brightness differences between single LEDs within one packing unit. 8) Dimensions are specified as follows: mm (inch). 9) A critical component is a component used in a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or the effectiveness of that device or system. 10) Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health and the life of the user may be endangered.