Q65110A1058

LWW5SG ETC1 | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 15

Technical content

Features

 package: white SMD package  feature of the device:High efficient lightsource at low space  color coordinates:x = 0.32, y = 0.31 acc. to CIE 1931 (white)  typ. color temperature:6500 K  color reproduction index:80  viewing angle:Lambertian Emitter (120°)  technology:InGaN  optical efficiency:21 lm/W  grouping parameter:luminous intensity, color coordinates  assembly methods: suitable for all SMT assembly methods  soldering methods:IR reflow soldering  preconditioning:acc. to JEDEC Level 4  taping:24 mm tape with 800/reel, ø180 mm  ESD-withstand voltage:u pt o2k Va c c .t o EOS/ESD-5.1-1993

Applications

 exterior and interior automotive lighting (e.g. front light, fog lamp, dashboard backlighting)  backlighting (illuminated advertising, general lighting)  reading lamps (aircraft, car, bus)  substitution of micro incandescent lamps  indoor and outdoor commercial and residential architectural lighting  displays where high brightness is required e.g. TFT  decorative and entertainment lighting  signal and symbol luminaire for orientation  marker lights (e.g. steps, exit ways, etc.)

Anm.: -5K8L Farbselektiert nach Farbortgruppen (sieheSeite 6) Die Standardlieferform von Serientypen beinhaltet eine Familiengruppe, die aus 4 Drittelgruppen besteht. Einzelne Drittelgruppen sind nicht erhältlich. In einer Verpackungseinheit / Gurt ist immer nur eine Drittelgruppe enthalten. Note: -5K8L Color selection acc. to Chromaticity coordinate groups (please seepage 6) The standard shipping format for serial types includes a family group of 4 individual third groups. Individual third groups are not available. No packing unit / tape ever contains more than one luminous intensity third group. Typ Type Emissions- farbe Color of Emission Farbe der Lichtaus- trittsfläche Color of the Light Emitting Area Lichtstrom Luminous Flux IF =3 5 0m A Φ V (mlm) Lichtstärke Luminous Intensity IF =3 5 0m A IV (mcd) Bestellnummer Ordering Code LW W5SG-GYHY-5K8L white colored diffused 21000 ... 39000 10000 (typ.) Q65110A1058

*Montage auf PC-Board - Metallkernplatine,λ = 1.3 W/(m*K), für weitere Informationen siehe Applikationsschrift im Internet (www.osram-os.com ). *Mounted on PC board - metall core PCB,λ = 1.3 W/(m*K), for further Information please find the application note on our web site (www.osram-os.com ). Grenzwerte Maximum Ratings Bezeichnung Parameter Symbol Symbol Wert Value Einheit Unit Betriebstemperatur Operating temperature range Top – 40 … +1 0 0 °C Lagertemperatur Storage temperature range Tstg – 40 … +1 0 0 °C Sperrschichttemperatur Junction temperature Tj 110 °C Durchlassstrom Forward current IF 350 mA Stoßstrom Surge current t≤ 10 µs,D = 0.005 IFM t. b. d. mA Sperrspannung1) Reverse voltage VR 1.2 V Leistungsaufnahme Power consumption Ptot 1.5 W W ärmewiderstand* Thermal resistance* Sperrschicht/Lötpad Junction/solder point Rth JS 9K / W 1) für kurzzeitigen Betrieb geeignet / suitable for short term application

Kennwerte (TA =2 5°C) Characteristics Bezeichnung Parameter Symbol Symbol Wert Value Einheit Unit Farbkoordinate x nach CIE 19311) (typ.) Chromaticity coordinate x acc. to CIE 1931 IF =3 5 0m A x0 . 3 2 – Farbkoordinate y nach CIE 19311) (typ.) Chromaticity coordinate y acc. to CIE 1931 IF =3 5 0m A y0 . 3 1 – Abstrahlwinkel bei 50 %IV (Vollwinkel) (typ.) Viewing angle at 50 %IV 2ϕ 120 Grad deg. Durchlassspannung2) (min.) Forward voltage (typ.) IF = 350 mA (max.) VF VF VF 3.8 4.0 V V V Sperrstrom Reverse current VR =1 . 2V ( m a x . ) IR 100 µA Temperaturkoeffizient von x (typ.) Temperature coefficient of x IF =3 5 0m A ;–10°C ≤ T ≤ 100°C TC x –0.1 10 -3/K Temperaturkoeffizient von y (typ.) Temperature coefficient of y IF =3 5 0m A ;–10°C ≤ T ≤ 100°C TC y –0.2 10 -3/K Temperaturkoeffizient vonVF (typ.) Temperature coefficient ofVF IF =3 5 0m A ;–10°C ≤ T ≤ 100°C TC V –4.0 mV/K Optischer Wirkungsgrad (typ.) Optical efficiency IF =3 5 0m A ηopt 21 lm/W 1) Farbortgruppen werden mit einer Stromeinprägedauer von 25 ms und einer Genauigkeit von ±0,01 ermittelt. Chromaticity coordinate groups are tested at a current pulse duration of 25 ms and a tolerance of ±0.01. 2) Durchlassspannungswerte werden mit einer Stromeinprägedauer von 1 ms und einer Genauigkeit von ±0,1 V ermittelt. Forward voltage values are tested at a current pulse duration of 1 ms and a tolerance of ±0.1 V.

1) Farbortgruppen Chromaticity coordinate groups OHA08327 520 530 540 550 560 570 580 590 600 610 620 630 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 510 500 490 480 470 450 460 0.25 0.20 E Cy Cx Cx Cy 0.22 0.24 0.26 0.28 0.30 0.32 0.34 0.36 0.38 0.40 0.42 0.21 0.23 0.25 0.27 0.29 0.31 0.33 0.35 0.37 0.39 0.41 0.26 0.27 0.28 0.29 0.30 0.31 0.32 0.33 0.34 0.35 0.36 0.37

Farbortgruppen1) Chromaticity coordinate groups Gruppe Group Cx Cy Gruppe Group Cx Cy Gruppe Group Cx Cy 3K 0,273 0,227 5K 0,296 0,259 7K 0,330 0,310 0,266 0,232 0,291 0,268 0,330 0,330 0,280 0,252 0,310 0,297 0,338 0,342 0,286 0,244 0,296 0,259 0,352 0,344 4K 0,286 0,244 6K 0,313 0,284 8K 0,352 0,344 0,280 0,252 0,310 0,297 0,338 0,342 0,291 0,268 0,330 0,330 0,364 0,380 0,296 0,259 0,330 0,310 0,360 0,357 1) Farbortgruppen werden mit einer Stromeinprägedauer von 25 ms und einer Genauigkeit von ±0,01 ermittelt. Chromaticity coordinate groups are tested at a current pulse duration of 25 ms and a tolerance of ±0.01. Farbortgruppen1) Chromaticity coordinate groups Gruppe Group Cx Cy Gruppe Group Cx Cy Gruppe Group Cx Cy 3L 0,266 0,232 5L 0,291 0,268 7L 0,330 0,330 0,258 0,239 0,285 0,279 0,330 0,347 0,273 0,261 0,307 0,312 0,347 0,371 0,280 0,252 0,291 0,268 0,345 0,352 4L 0,280 0,252 6L 0,310 0,297 8L 0,345 0,352 0,273 0,261 0,307 0,312 0,347 0,371 0,285 0,279 0,330 0,347 0,367 0,401 0,291 0,268 0,330 0,330 0,364 0,380 1) Farbortgruppen werden mit einer Stromeinprägedauer von 25 ms und einer Genauigkeit von ±0,01 ermittelt. Chromaticity coordinate groups are tested at a current pulse duration of 25 ms and a tolerance of ±0.01.

Helligkeitswerte werden mit einer Stromeinprägedauer von 25 ms und einer Genauigkeit von± 11% ermittelt. Luminous intensity is tested at a current pulse duration of 25 ms and a tolerance of± 11%. Gruppenbezeichnung auf Etikett Group Name on Label Beispiel: GZ-6K Example: GZ-6K Helligkeits-Gruppierungsschema Luminous Intensity Groups Lichtgruppe Luminous Intensity Group Lichtstrom Luminous Flux Φ V (mlm) Lichtstärke Luminous Intensity IV (mcd) GY GZ HX HY 21000 ... 24000 24000 ... 28000 28000 ... 33000 33000 ... 39000 7500 (typ.) 8500 (typ.) 10000 (typ.) 12000 (typ.) Lichtgruppe Luminous Intensity Group Drittelgruppe Third Group Farbortgruppe Chromaticity Coordinate Group GZ 6 K

Relative spektrale Emissionsiehe Fußn o t e1a u fS e i t e9 Relative Spectral Emissionsee remark 1 on page 9 Irel= f(λ),TA =2 5°C, IF = 350 mA V( λ) = spektrale Augenempfindlichkeit Standard eye response curve Abstrahlcharakteristiksiehe Fußn o t e1a u fS e i t e9 Irel= f(ϕ) Radiation Characteristicsee remark 1 on page 9 400 λ OHL01461 I 100 rel nm Vλ 450 500 550 600 650 700 750 0.2 0.4 1.0 0.8 0.6 ϕ 1.0 0.8 0.6 0.4 50˚ 60˚ 70˚ 80˚ 90˚ 100˚

Durchlassstrom1) Forward Current1) IF = f(VF);TA =2 5° C Farbortverschiebung1) Chromaticity Coordinate Shift1) x, y =f(IF);TA =2 5° C Relative Lichtstrom1) 2) Relative Luminous Flux1) 2) Φ V/Φ V(350 mA)= f(IF);TA =2 5° C OHL00830 101 mA IF VF 2.8 103 V 102 OHL00829 0.300 FI Cy 0 200 400 600 mA 1000 0.302 0.304 0.306 0.308 0.310 0.312 0.314 0.316 0.318 0.320 0.324 Cy Cx 1) Wegen der besonderen Prozessbedingungen bei der Herstellung von LED können typische technische Parameter nur aufgrund statistischer Werte wiedergegeben werden. Diese stimmen nicht notwendigerweise mit den Werten jedes einzelnen Produktes überein, dessen Werte sich von typischen Werten unterscheiden können . Due to the special conditions of the manufacturing processes of LED, the typical data of technical parameters can only reflect statistical figures. These do not necessarily correspond to the actual parameters of each single product, which could differ from the typical data or the typical characteristic line. 2) Im gestrichelten Bereich der Kennlinie muss mit erhöhten Helligkeitsunterschieden zwischen Leuchtdioden innerhalb einer Verpackungseinheit gerechnet werden. In the range where the line of the graph is broken, you must expect higher brightness differences between single LEDs within one packing unit. OHL00831 10-2 101 110 mA 310 FI Φ V (350 mA) Φ V 102 10-1 100

Relative Lichtstärkesiehe Fußnote 1 auf Seite 9 Relative Luminous Intensitysee remark 1 on page 9 IV/IV(25 °C)= f(TS);IF =3 5 0m A Maximal zulässiger Durchlassstrom Max. Permissible Forward Current IF = f(TS) OHL02870 -60 T V (25 ˚C)I IV -40 -20 0 20 40 60 100 0.2 0.4 0.6 0.8 1.0 1.2 1.4

Ma ßzeichnung Package Outlines Ma ße werden wie folgt angegeben: mm (inch) / Dimensions are specified as follows: mm (inch). Kathodenkennung: Markierung Cathode mark: mark Gewicht / Approx. weight:0.2 g GPLY6192 6.2 (0.244) 5.8 (0.228) 1.9 (0.075) 1.7 (0.067) Cathode marking R1.5 (0.059) 11.2 (0.441) 10.8 (0.425) 1.2 (0.047) 0.8 (0.031) 0.29 (0.011) 0.24 (0.009) 6.8 (0.268) 7.2 (0.283) 1.0 (0.039) 0.8 (0.031) 1.6 (0.063) 2.0 (0.079) (ø4.2 (0.165)) Protection Heat sink A C Diode

Lötbedingungen Vorbehandlung nach JEDEC Level 4 Soldering ConditionsPreconditioning acc. to JEDEC Level 4 IR-Reflow Lötprofil (nach IPC 9501) IR Reflow Soldering Profile(acc. to IPC 9501) OHLY0597 50 100 150 200 250 100 150 200 250 300 T t s 240-245 ˚C 10-40 s 183 ˚C 120 to 180 s Defined for Preconditioning: up to 6 K/s Ramp-down rate up to 6 K/s Ramp-up rate up to 6 K/s Defined for Preconditioning: 2-3 K/s

Empfohlenes Lötpaddesign IR Reflow Löten Recommended Solder Pad IR Reflow Soldering Ma ße werden wie folgt angegeben: mm (inch) / Dimensions are specified as follows: mm (inch) OHAY0681 3.0 (0.118) 14.4 (0.567) 3.0 (0.118) ø4.0 (0.157) 14.4 (0.567) 3.0 (0.118) 3.0 (0.118) ø4.0 (0.157) Lötstopplack Solder resist

3 Lötstellen

10 (0.394) 15.0 (0.591) 0.3 (0.012) Copper Kupfer Footprint Empfohlene Padgeometrie Recommended Solder Pad Design Achtung: Anode und Heatsink sind elektrisch verbunden Attention: Anode and Heatsink are electrically connected

Gurtung / Polarität und Lage Verpackungseinheit 800/Rolle,ø180 mm Method of Taping / Polarity and OrientationPacking unit 800/reel,ø180 mm Ma ße werden wie folgt angegeben: mm (inch) / Dimensions are specified as follows: mm (inch) OHAY0508 4 (0.157) 6.35 (0.250) 8 (0.315) 1.75 (0.069) 11.5 (0.453) 12.4 (0.488) 24 (0.945) 0.3 (0.012) 0.3 (0.012) 1.9 (0.075) 7.35 (0.289) Protection Diode Heat sink C A

Published by OSRAM Opto Semiconductors GmbH Wernerwerkstrasse 2, D-93049 Regensburg © All Rights Reserved. Attention please! The information describes the type of component and shall not be considered as assured characteristics. All typical data and graphs are basing on representative samples, but don’t represent the production range. If requested, e.g. because of technical improvements, these typ. data will be changed without any further notice. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. If printed or downloaded, please find the latest version in the Internet. Packing Please use the recycling operators known to you. We can also help you– get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose!Critical components 1 may only be used in life-support devices or systems2 with the express written approval of OSRAM OS. 1 A critical component is a component used in a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or the effectiveness of that device or system. 2 Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health of the user may be endangered. Revision History: 2003-09-08 Date of change Previous Version: Page Subjects (major changes since last revision) Patent List Patent No. US 6 066 861, US 6 277 301, US 6 245 259