Q6025K6TP

Q6025K6TP LITTELFUSE | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 11

Technical content

117©2010 Littelfuse, Inc Revised: May 10, 2010 09:33 PM T eccor® brand Thyristors Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. T eccor® brand Thyristors Qxx25xx & Qxx25xHx Series

25 Amp Standard & Alternistor (High Commutation) Triacs

25 A TRIACs

Qxx25xx & Qxx25xHx Series

Description

25 Amp bi-directional solid state switch series is designed

for AC switching and phase control applications such as motor speed and temperature modulation controls, lighting controls, and static switching relays. Standard type devices normally operate in Quadrants I & III triggered from AC line. Alternistor type devices only operate in quadrants I, II, & III and are used in circuits requiring high dv/dt capability. Features & Benefits t3P)4DPNQMJBOU t(MBTToQBTTJWBUFE junctions t7PMUBHFDBQBCJMJUZVQ to 1000 V t4VSHFDBQBCJMJUZVQ to 250 A Main Features Symbol Value Unit IT(RMS) 25 A VDRM/VRRM 1000 V IGT 50 to 80 mA Schematic Symbol MT2 MT1 G Agency Approval Agency Agency File Number TO-220L, TO-218K, TO-218J & Fastpak Packages: E71639 Applications Excellent for AC switching and phase control applications such as heating, lighting, and motor speed controls. Typical applications are AC solid-state switches, industrial power tools, exercise equipment, white goods and commercial appliances. Alternistor Triacs (no snubber required) are used in applications with extremely inductive loads requiring highest commutation performance. Internally constructed isolated packages are offered for ease of heat sinking with highest isolation voltage.

Revised: May 10, 2010 09:33 PM ©2010 Littelfuse, Inc T eccor® brand Thyristors Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Qxx25xx & Qxx25xHx Series Absolute Maximum Ratings – Standard T riac Symbol Parameter Test Conditions Value Unit IT(RMS) RMS on-state current Qxx25R5 Qxx25N5 TC = 85°C 25 A Qxx25P5 T C = 57°C ITSM Peak non-repetitive surge current Qxx25R5 Qxx25N5 single half cycle; f = 50Hz; TJ (initial) = 25°C 167 A single half cycle; f = 60Hz; TJ (initial) = 25°C 200 Qxx25P5 single half cycle; f = 50Hz; TJ (initial) = 25°C 220 single half cycle; f = 60Hz; TJ (initial) = 25°C 250 I2tI 2t Value for fusing Qxx25R5 Qxx25N5 tp = 8.3ms 166 A2s Qxx25P5 260 di/dt Critical rate-of-rise of on-state current f = 60Hz; T J =125°C 100 A/μs IGTM Peak gate current TJ = 125°C 2A PG(AV) Average gate power dissipation TJ = 125°C 0.5 W Tstg Storage temperature range -40 to 125 °C TJ Operating junction temperature range Qxx25R5 Qxx25N5 -40 to 125 Qxx25P5 -25 to 125 Absolute Maximum Ratings – Alternistor T riac Symbol Parameter Test Conditions Value Unit IT(RMS) RMS on-state current Qxx25LH5 Qxx25L6 TC = 65°C 25 A Qxx25K6 Qxx25J6 TC = 85°C Qxx25RH5 Qxx25NH5 Qxx25R6 Qxx25NH6 TC = 95°C ITSM Peak non-repetitive surge current single half cycle; f = 50Hz; TJ (initial) = 25°C 208 A single half cycle; f = 60Hz; TJ (initial) = 25°C 250 I2tI 2t Value for fusing t p = 8.3ms 260 A 2s di/dt Critical rate-of-rise of on-state current f = 60Hz; T J =125°C 100 A/μs IGTM Peak gate current T J = 125°C 2 A PG(AV) Average gate power dissipation T J = 125°C 0.5 W Tstg Storage temperature range -40 to 125 °C TJ Operating junction temperature range -40 to 125 °C Note: xx = voltage

119©2010 Littelfuse, Inc Revised: May 10, 2010 09:33 PM T eccor® brand Thyristors Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. T eccor® brand Thyristors Qxx25xx & Qxx25xHx Series Electrical Characteristics (TJ = 25°C, unless otherwise specified) — Standard T riac Symbol Test Conditions Quadrant Value UnitQxx25R5 Qxx25N5 Qxx25P5 IGT VD = 12V; RL = 60 8 I – II – III MAX. 50 mA IV TYP . 120 VGT I – II – III MAX. 1 .3 V IV TYP . 2.5 VGD VD = VDRM; RL = 3.3 k8 ; TJ = 125°C ALL MIN. 0.2 V IH IT = 400mA (initial) MAX. 100 50 mA dv/dt VD = VDRM; Gate Open; TJ = 125°C 400V MIN. 275 — V/μs 600V 225 475 800V 200 400 VD = VDRM; Gate Open; TJ = 100°C 1000V 200 — (dv/dt)c (di/dt)c = 13.3 A/ms; T J = 125°C MIN. 5 V/μs tgt IG = 2 x IGT; PW = 15μs; IT = 35.4 A TYP . 4 3 μs Symbol Test Conditions Quadrant Value UnitQxx25RH5 Qxx25LH5 Qxx25NH5 Qxx25R6 Qxx25L6 Qxx25NH6 Qxx25K6 Qxx25J6 IGT VD = 12V; RL = 60 8 I – II – III MAX. 50 80 mA VGT I – II – III MAX. 1 .3 V VGD VD = VDRM; RL = 3.3 k8 ; TJ = 125°C I – II – III MIN. 0.2 V IH IT = 400mA (initial) MAX. 50 100 mA dv/dt VD = VDRM; Gate Open; TJ = 125°C 400V MIN. 575 600 V/μs 600V 500 600 800V 400 475 VD = VDRM; Gate Open; TJ = 100°C 1000V — 400 (dv/dt)c (di/dt)c = 13.3 A/ms; T J = 125°C MIN. 20 30 V/μs tgt IG = 2 x IGT; PW = 15μs; IT = 35.4 A TYP . 3 5 μs Electrical Characteristics (TJ = 25°C, unless otherwise specified) — Alternistor T riac Symbol Test Conditions Value Unit Qxx25R5 Qxx25N5 Qxx25xH5 Qxx25x6 Qxx25NH6 Qxx25P5 VTM IT = 35.4A; tp = 380 μs MAX. 1 .8 1 .4 V IDRM / IRRM VDRM / VRRM TJ = 25°C 600 – 800V MAX. 10 100 μA 1000V 20 — TJ = 100°C 600 – 800V 500 — 1000V 1000 — TJ = 125°C 600 – 800V 2000 5000 Note: xx = voltage, x = package Static Characteristics

Revised: May 10, 2010 09:33 PM ©2010 Littelfuse, Inc T eccor® brand Thyristors Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Qxx25xx & Qxx25xHx Series Thermal Resistances Symbol Parameter Value Unit RR(J-C) Junction to case (AC) Qxx25R5 / Qxx25N5 Qxx25R6 / Qxx25NH6 Qxx25RH5 / Qxx25NH5 0.89 °C/WQxx25P5 1 .6 Qxx25L6 / Qxx25LH5 2.0 Qxx25K6 / Qxx25J6 1 .32 RR(J-A) Junction to ambient Qxx25Ry 45 °C/W Qxx25L6 / Qxx25LH5 50 Note: xx = voltage, y = sensitivity Figure 1: Normalized DC Gate T rigger Current vs. Junction T emperature Figure 2: Normalized DC Gate T rigger Voltage vs. Junction T emperature 0.0 0.5 1.0 1.5 2.0 -40 -1 5 10 3 5 60 8 5 110 12 5 Junction Temperature (T J) -- (ºC) Ratio of VGT / VGT(TJ = 25ºC) 0.0 0.5 1.0 1.5 2.0 2.5 -40 -1 5 10 3 5 60 8 5 110 125 Junction Temperature (T J) -- (°C) Ratio of IGT/IGT(TJ = 25°C) Figure 3: Normalized DC Holding Current vs. Junction T emperature Figure 4: On-State Current vs. On-State Voltage (T ypical) 0.0 0.5 1.0 1.5 2.0 -40 -1 5 10 3 5 60 8 5 110 125 Junction Temperature (T J) -- (ºC) Ratio of IH / IH(TJ = 25ºC) TJ = 25°C Instantaneous On-state Voltage (vT) – Volts Instantaneous On-state Current (iT) – Amps Qxx25R5 Qxx25N5 Qxx25P5/Qxx25R6 Qxx25L6/Qxx25NH6 Qxx25K6/Qxx25J6 Qxx25RH5/Qxx25LH5 Qxx25NH5

121©2010 Littelfuse, Inc Revised: May 10, 2010 09:33 PM T eccor® brand Thyristors Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. T eccor® brand Thyristors Qxx25xx & Qxx25xHx Series Figure 5: Power Dissipation (T ypical) vs. RMS On-State Current Figure 6: Maximum Allowable Case T emperature vs. RMS On-State Current 100 120 RMS On-State Current [I T(RMS)] -- Amps Maximum Allowable Ambient Temperature (TA) --°C CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 360° FREE AIR RATING Figure 7: Maximum Allowable Ambient T emperature vs. RMS On-State Current (TO-220 packages only) 100 1000 1 10 100 1000 Surge Current Duration -- Full Cycles Peak Surge (Non-repetitive) On-state Current (ITSM) – Amps Qxx25R5 Qxx25N5 Qxx25P5/Qxx25R6 Qxx25L6/Qxx25NH6 Qxx25K6/Qxx25J6 Qxx25RH5/Qxx25LH5 Qxx25NH5 Figure 8: Surge Peak On-State Current vs. Number of Cycles SUPPLY FREQUENCY: 60 Hz Sinusoidal LOAD: Resistive RMS On-State Current: [I T(RMS)]: Maximum Rated Value at Specified Case Temperature Notes: 1. Gate control may be lost during and immediately following surge current interval. 2. Overload may not be repeated until junction temperature has returned to steady-state rated value. 0 5 10 1 5 20 2 5 RMS On-State Current [I T(RMS)] -- Amps Average On-State Power Dissipation [PD(AV)] -- Watts Qxx25R5 Qxx25N5 CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 360° Qxx25P5/Qxx25R6 Qxx25L6/Qxx25NH6 Qxx25K6/Qxx25J6 Qxx25RH5/Qxx25LH5 Qxx25NH5 50 100 110 120 130 RMS On-State Current [I T(RMS)] - Amps Maximum Allowable Case Temperature (TC) - °C 0 5 10 1 5 20 2 5 30 CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 360° Qxx25R5 Qxx25N5 Qxx25K6 Qxx25J6 Qxx25L6 Qxx25LH5 Qxx25P5 Qxx25R6 Qxx25NH6 Qxx25RH5 Qxx25NH5

Revised: May 10, 2010 09:33 PM ©2010 Littelfuse, Inc T eccor® brand Thyristors Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Qxx25xx & Qxx25xHx Series Soldering Parameters Reflow Condition Pb – Free assembly Pre Heat - Temperature Min (Ts(min)) 150°C - Temperature Max (Ts(max)) 200°C - Time (min to max) (ts) 60 – 180 secs Average ramp up rate (Liquidus Temp) (TL) to peak 5°C/second max TS(max) to TL - Ramp-up Rate 5°C/second max Reflow - Temperature (TL) (Liquidus) 217°C - Temperature (tL) 60 – 150 seconds Peak Temperature (TP) 260+0/-5 °C Time within 5°C of actual peak Temperature (tp) 20 – 40 seconds Ramp-down Rate 5°C/second max Time 25°C to peak Temperature (TP) 8 minutes Max. Do not exceed 280°C Physical Specifications Environmental Specifications Test Specifications and Conditions High T emperature Voltage Blocking MIL -STD-750: Method 1040, Condition A Rated VRRM, 125°C, 1008 hours T emperature Cycling MIL -STD-750: Method 1051 -40°C to 125°C, 15-minute dwell, 100 cycles Biased T emp & Humidity EIA/JEDEC: JESD22-A101 320VDC, 85°C, 85%RH, 1008 hours High T emp. Storage MIL -STD-750: Method 1031 150°C, 1008 hours Low-T emp Storage -40°C, 1008 hours Thermal Shock MIL -STD-750: Method 1056 0°C to 100°C, 5-minute dwell, 10-second transfer, 10 cycles Autoclave (Pressure Cooker T est) EIA/JEDEC: JESD22-A102 121°C, 100%RH, 2atm, 168 hours Resistance to Solder Heat MIL -STD-750: Method 2031 260°C, 10 seconds Solderability ANSI/J-STD-002, Category 3, Test A Lead Bend MIL -STD-750: Method 2036, Condition E T erminal Finish 100% Matte Tin-plated Body Material UL recognized epoxy meeting flammability classification 94V-0 Lead Material Copper Alloy Design Considerations Careful selection of the correct device for the application’s operating parameters and environment will go a long way toward extending the operating life of the Thyristor. Good design practice should limit the maximum continuous current through the main terminals to 75% of the device rating. Other ways to ensure long life for a power discrete semiconductor are proper heat sinking and selection of voltage ratings for worst case conditions. Overheating, overvoltage (including dv/dt), and surge currents are the main killers of semiconductors. Correct mounting, soldering, and forming of the leads also help protect against component damage. Time Temperature TP TL TS(max) TS(min) tP tL tS time to peak temperature PreheatPreheat Ramp-upRamp-up Ramp-downRamp-do

123©2010 Littelfuse, Inc Revised: May 10, 2010 09:33 PM T eccor® brand Thyristors Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. T eccor® brand Thyristors Qxx25xx & Qxx25xHx Series Dimensions — TO-220AB (R Package) — Non-isolated Mounting T ab Dimension Inches Millimeters Min Max Min Max A 0.380 0.420 9.65 10.67 B 0.105 0.115 2.67 2.92 C 0.230 0.250 5.84 6.35 D 0.590 0.620 14.99 15.75 E 0.142 0.147 3.61 3.73 F 0.110 0.130 2.79 3.30 G 0.540 0.575 13.72 14.61 H 0.025 0.035 0.64 0.89 J 0.195 0.205 4.95 5.21 K 0.095 0.105 2.41 2.67 L 0.060 0.075 1 .52 1 .91 M 0.085 0.095 2.16 2.41 N 0.018 0.024 0.46 0.61 O 0.178 0.188 4.52 4.78 P 0.045 0.060 1 .14 1 .52 R 0.038 0.048 0.97 1 .22 Dimensions — TO-220AB (L Package) — Isolated Mounting T ab Dimension Inches Millimeters Min Max Min Max A 0.380 0.420 9.65 10.67 B 0.105 0.115 2.66 2.92 C 0.230 0.250 5.85 6.35 D 0.590 0.620 14.98 15.75 E 0.142 0.147 3.61 3.73 F 0.110 0.130 2.80 3.30 G 0.540 0.575 13.71 14.60 H 0.025 0.035 0.63 0.89 J 0.195 0.205 4.95 5.21 K 0.095 0.105 2.41 2.67 L 0.060 0.075 1 .52 1 .91 M 0.085 0.095 1 .78 2.16 N 0.018 0.024 0.45 0.61 O 0.178 0.188 4.52 4.78 P 0.045 0.060 1 .14 1 .53 R 0.038 0.048 0.97 1 .22 K J A H G B F Ø E C D L R TC MEASURING POINT AREA (REF .) 0.17 IN 2 MT2 O P N M MT1 GATE .320 8.13 .526 13.36 .276 7.01 K J A H G B F Ø E C D L R TC MEASURING POINT MT2 MT2 O P N M MT1 .276 7.01 .526 13.36 .320 8.13 GATE AREA (REF .) 0.17 IN2 NOTCH IN GATE LEAD TO ID. NON-ISOLATED TAB Note: Maximum torque to be applied to mounting tab is 8 in-lbs. (0.904 Nm). Note: Maximum torque to be applied to mounting tab is 8 in-lbs. (0.904 Nm).

Revised: May 10, 2010 09:33 PM ©2010 Littelfuse, Inc T eccor® brand Thyristors Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Qxx25xx & Qxx25xHx Series Dimensions — TO-263 (N Package) — D2Pak Surface Mount Dimensions — TO-218AC (K Package) — Isolated Mounting T ab Dimension Inches Millimeters Min Max Min Max A 0.810 0.835 20.57 21 .21 B 0.610 0.630 15.49 16.00 C 0.178 0.188 4.52 4.78 D 0.055 0.070 1 .40 1 .78 E 0.487 0.497 12.37 12.62 F 0.635 0.655 16.13 16.64 G 0.022 0.029 0.56 0.7 4 H 0.075 0.095 1 .91 2.41 J 0.575 0.625 14.61 15.88 K 0.211 0.219 5.36 5.56 L 0.422 0.437 10.72 11 .10 M 0.058 0.068 1 .47 1 .73 N 0.045 0.055 1 .14 1 .40 P 0.095 0.115 2.41 2.92 Q 0.008 0.016 0.20 0.41 R 0.008 0.016 0.20 0.41 U 0.164 0.165 4.10 4.20 W 0.085 0.095 2.17 2.42 G B A W F D V S MT1 MT2 TC MEASURING POINT C E K H J U .320 8.13 .276 7. 0 1 .331 8.41 GATE .460 1 1.68 .665 16.89 .260 6.60 .150 3.81 .080 2.03 .085 2.16 .055 1.40 .350 8.89 .276 7. 0 1 .276 7. 0 1 AREA: 0.1 1 IN2 Dimension Inches Millimeters Min Max Min Max A 0.360 0.370 9.14 9.40 B 0.380 0.420 9.65 10.67 C 0.178 0.188 4.52 4.78 D 0.025 0.035 0.64 0.89 E 0.045 0.060 1 .14 1 .52 F 0.060 0.075 1 .52 1 .91 G 0.095 0.105 2.41 2.67 H 0.092 0.102 2.34 2.59 J 0.018 0.024 0.46 0.61 K 0.090 0.110 2.29 2.79 S 0.590 0.625 14.99 15.88 V 0.035 0.045 0.89 1 .14 U 0.002 0.010 0.05 0.25 W 0.040 0.070 1 .02 1 .78 C D H G F B A E TC Measurement Point U (diameter) P Gate J MT2 MT1 M N K L R Q W Note: Maximum torque to be applied to mounting tab is 8 in-lbs. (0.904 Nm).

125©2010 Littelfuse, Inc Revised: May 10, 2010 09:33 PM T eccor® brand Thyristors Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. T eccor® brand Thyristors Qxx25xx & Qxx25xHx Series Dimensions — TO-218X (J Package) — Isolated Mounting T ab Dimensions — TO-3 (P Package) Fastpak — Isolated Mounting T ab G R Y H D C K B A E F N T M P J L S V U (diameter) W X MT1 MT2 Tc Measurement Point Gate Note: Maximum torque to be applied to mounting tab is 8 in-lbs. (0.904 Nm). Z MT2 GateMT1 G 5 - N J (MT1, MT2) F H E C B A D Q O R S P U T I M L TC Measur ingPoint Thickness off all three copper-alloy terminals is .032" (0.81 mm). W V K (Gate) Dimension Inches Millimeters Min Max Min Max A 0.810 0.835 20.57 21 .21 B 0.610 0.630 15.49 16.00 C 0.178 0.188 4.52 4.78 D 0.055 0.070 1 .40 1 .78 E 0.487 0.497 12.37 12.62 F 0.635 0.655 16.13 16.64 G 0.022 0.029 0.56 0.7 4 H 0.075 0.095 1 .91 2.41 J 0.575 0.625 14.61 15.88 K 0.256 0.264 6.50 6.71 L 0.220 0.228 5.58 5.79 M 0.080 0.088 2.03 2.24 N 0.169 0.177 4.29 4.49 P 0.034 0.042 0.86 1 .07 R 0.113 0.121 2.87 3.07 S 0.086 0.096 2.18 2.44 T 0.156 0.166 3.96 4.22 U 0.164 0.165 0.410 0.420 V 0.603 0.618 15.31 15.70 W 0.000 0.005 0.00 0.13 X 0.003 0.012 0.07 0.30 Y 0.028 0.032 0.71 0.81 Z 0.085 0.095 2.17 2.42 Dimension Inches Millimeters Min Max Min Max A 1 .531 1 .543 38.90 39.20 B 1 .177 1 .185 29.90 30.10 C 0.843 0.850 21 .40 21 .60 D 0.780 0.795 19.80 20.20 E 0.783 0.791 19.90 20.10 F 0.87 4 0.906 22.20 23.00 G 0.161 0.169 4.10 4.30 H 0.386 0.465 9.80 11 .80 I 0.508 0.587 12.90 14.90 J 0.079 0.087 2.00 2.20 K 0.047 0.055 1 .20 1 .40 L 0.307 0.319 7 .80 8.10 M 0.372 0.396 9.45 10.05 N 0.043 0.059 1 .10 1 .50 O 0.315 0.331 8.00 8.40 P 0.098 0.106 2.50 2.70 Q 0.846 0.886 21 .50 22.50 R 0.244 0.256 6.20 6.50 S 0.106 0.130 2.70 3.30 T (MT1) 0.321 0.329 8.15 8.35 T (MT2) 0.321 0.329 8.15 8.35 T (Gate) 0.220 0.228 5.60 5.80 U (MT1) 0.246 0.254 6.25 6.45 U (MT2) 0.246 0.254 6.25 6.45 U (Gate) 0.183 0.191 4.65 4.85 V 0.120 0.130 3.05 3.30 W 0.175 0.185 4.45 4.70 Maximum torque to be applied to mounting tab is 8 in-lbs (0.904Nm).

Revised: May 10, 2010 09:33 PM ©2010 Littelfuse, Inc T eccor® brand Thyristors Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Qxx25xx & Qxx25xHx Series Product Selector Packing Options Part Number Voltage Gate Sensitivity Quadrants Package 400V 600V 800V 1000V I - II - III IV Qxx25R5 XXXX 5 0 m A 1 2 0 m A (TYP) TO-220R Qxx25N5 XXXX 5 0 m A 1 2 0 m A (TYP) TO-263 D 2-Pak Qxx25P5 X X 50 mA 120 mA (TYP) Fastpak Qxx25RH5 X X X 50 mA TO-220R Qxx25LH5 X X X 50 mA TO-220L Qxx25NH5 X X X 50 mA TO-263 D 2-Pak Qxx25R6 XXXX 8 0 m A T O-220R Qxx25L6 XXXX 8 0 m A T O-220L Qxx25NH6 XXXX 8 0 m A T O-263 D2-Pak Qxx25J6 X X X 80 mA TO-218X Qxx25K6 XXXX 8 0 m A T O-218AC Part Number Marking Weight Packing Mode Base Quantity Qxx25R5 Qxx25R5 2.20g Bulk 500 Qxx25R5TP Qxx25R5 2.20g Tube 500 (50 per tube) Qxx25N5TP Qxx25N5 1 .60g Tube 500 (50 per tube) Qxx25N5RP Qxx25N5 1 .60g Embossed Carrier 500 Qxx25RH5 Qxx25RH5 2.20g Bulk 500 Qxx25RH5TP Qxx25RH5 2.20g Tube 500 (50 per tube) Qxx25LH5 Qxx25LH5 2.20g Bulk 500 Qxx25LH5TP Qxx25LH5 2.20g Tube 500 (50 per tube) Qxx25NH5TP Qxx25NH5 1 .60g Tube 500 (50 per tube) Qxx25NH5RP Qxx25NH5 1 .60g Embossed Carrier 500 Qxx25P5 Qxx25P5 21 .4g Bulk 200 Qxx25R6 Qxx25R6 2.20g Bulk 500 Qxx25R6TP Qxx25R6 2.20g Tube 500 (50 per tube) Qxx25L6 Qxx25L6 2.20g Bulk 500 Qxx25L6TP Qxx25L6 2.20g Tube 500 (50 per tube) Qxx25NH6TP Qxx25NH6 1 .60g Tube 500 (50 per tube) Qxx25NH6RP Qxx25NH6 1 .60g Embossed Carrier 500 Qxx25J6TP Qxx25J6 5.23g Tube 250 (25 per tube) Qxx25K6TP Qxx25K6 4.40g Tube 250 (25 per tube)

127©2010 Littelfuse, Inc Revised: May 10, 2010 09:33 PM T eccor® brand Thyristors Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. T eccor® brand Thyristors Qxx25xx & Qxx25xHx Series 0.512 (13.0) Arbor Hole Dia. 0.945 (24.0) 0.63 (16.0) 1.01 (25.7) 12.99 (330.0) 0.827 (21.0) 0.157 (4.0) Direction of Feed Dimensions are in inches (and millimeters). *Cover tape 0.059 DIA(1.5) TO-263 Embossed Carrier Reel Pack (RP) Specifications Meets all EIA-481-2 Standards Part Numbering System Part Marking System Q 60 25 N H6 DEVICE TYPE Q: Triac or Alternistor VOLTAGE RATING 40: 400V 60: 600V 80: 800V K0: 1000V CURRENT RATING 25: 25A PACKAGE TYPE L : TO-220AB Isolated R : TO-220AB Non-Isolated N : TO-263 (D 2 -Pak) K : TO-218AC Isolated J : TO-218X Isolated P : Fastpak SENSITIVITY Standard Triac 5: 50mA Alternistor H5: 50mA 6: 80mA H6: 80mA TO-218AC (K Package) TO-218X (J Package) yxxxx Q6025L5 TO-220AB (R & L Packages) TO-263 (N Package) Fastpak (P Package) Q6025K6 yxxxx yxxxx Q6025P5