Q6008DH3RP

Q6008DH3RP LITTELFUSE | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 14

Technical content

75©2010 Littelfuse, Inc Revised: July 29, 2010 12:24 PM T eccor® brand Thyristors Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. T eccor® brand Thyristors Lxx08xx & Qxx08xx & Qxx08xHx Series

8 Amp Sensitive, Standard & Alternistor (High Commutation) Triacs

8.0A TRIACs Lxx08xx & Qxx08xx & Qxx08xHx Series Main Features

Description

8 Amp bi-directional solid state switch series is designed

for AC switching and phase control applications such as motor speed and temperature modulation controls, lighting controls, and static switching relays. Sensitive type devices guarantee gate control in Quadrants I & IV needed for digital control circuitry. Standard type devices normally operate in Quadrants I & III triggered from AC line. Alternistor type devices only operate in quadrants I, II, & III and are used in circuits requiring high dv/dt capability. Symbol Value Unit IT(RMS) 8A VDRM/VRRM 400 to 1000 V IGT (Q1) 5 to 50 mA Features & Benefits t3P)4DPNQMJBOU t(MBTToQBTTJWBUFE junctions t7PMUBHFDBQBCJMJUZVQ to 1000 V t4VSHFDBQBCJMJUZVQ to 100 A t&MFDUSJDBMMZJTPMBUFE “L-Package” is UL recognized for 2500Vrms t4PMJETUBUFTXJUDIJOH eliminates arcing or contact bounce that create voltage transients t/PDPOUBDUTUPXFBSPVU from reaction of switching events t3FTUSJDUFE PSMJNJUFE 3'* generation, depending on activation point of sine wave t3FRVJSFTPOMZBTNBMMHBUF activation pulse in each half-cycle

Applications

&YDFMMFOUGPS"$TXJUDIJOHBOEQIBTFDPOUSPMBQQMJDBUJPOT such as heating, lighting, and motor speed controls. Typical applications are AC solid-state switches, light dimmers, power tools, home/brown goods and white goods appliances. Alternistor Triacs (no snubber required) are used in BQQMJDBUJPOTXJUIFYUSFNFMZJOEVDUJWFMPBETSFRVJSJOH highest commutation performance. Internally constructed isolated packages are offered for ease of heat sinking with highest isolation voltage. Schematic Symbol MT2 MT1 G Agency Approval Agency Agency File Number ® -1BDLBHF&

Revised: July 29, 2010 12:24 PM ©2010 Littelfuse, Inc T eccor® brand Thyristors Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Lxx08xx & Qxx08xx & Qxx08xHx Series Absolute Maximum Ratings — Sensitive T riac (4 Quadrants) Symbol Parameter Value Unit IT(RMS) RMS on-state current (full sine wave) -YY-Z TC = 80°C -YY3Z-YY7Z-YY%Z TC = 85°C ITSM /POSFQFUJUJWFTVSHFQFBLPOTUBUFDVSSFOU (full cycle, TJ initial = 25°C) G )[ t = 20 ms A G )[ U NT 85 I2tI 2t Value for fusing t p NT A2s di/dt Critical rate of rise of on-state current IG = 50mA with 0.1μs rise time G )[ TJ = 110°C A/μs IGTM Peak gate trigger current tp c 10 μs TJ = 110°C A PG(AV) Average gate power dissipation TJ = 110°C 0.4 W Tstg Storage temperature range -40 to 150 °C TJ Operating junction temperature range -40 to 110 °C /PUFYY WPMUBHF Z TFOTJUJWJUZ Absolute Maximum Ratings — Standard T riac Symbol Parameter Value Unit IT(RMS) RMS on-state current (full sine wave) 2YY3Z2YY/Z TC 2YY-Z TC ITSM /POSFQFUJUJWFTVSHFQFBLPOTUBUFDVSSFOU (full cycle, TJ initial = 25°C) G )[ t = 20 ms A G )[ U NT 100 I2tI 2t Value for fusing t p NT 41 A 2s di/dt Critical rate of rise of on-state current IG = 200mA with c 0.1μs rise time G )[ TJ = 125°C A/μs IGTM Peak gate trigger current tp c 10 μs; IGT c TGTM TJ = 125°C 1. 8 A PG(AV) Average gate power dissipation TJ = 125°C 0.5 W Tstg Storage temperature range -40 to 150 °C TJ Operating junction temperature range -40 to 125 °C /PUFYY WPMUBHF Z TFOTJUJWJUZ

77©2010 Littelfuse, Inc Revised: July 29, 2010 12:24 PM T eccor® brand Thyristors Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. T eccor® brand Thyristors Lxx08xx & Qxx08xx & Qxx08xHx Series 8.0A TRIACs Absolute Maximum Ratings — Alternistor (3 Quadrants) Symbol Parameter Value Unit IT(RMS) RMS on-state current (full sine wave) 2YY-)Z TC 8A2YY3)Z2YY/)Z 2YY7)Z2YY%)Z TC ITSM /POSFQFUJUJWFTVSHFQFBLPOTUBUFDVSSFOU (full cycle, TJ initial = 25°C) G )[ t = 20 ms 2YY7)Z 2YY%)Z 80 A 2YY-)Z 2YY3)Z 2YY/)Z G )[ U NT 2YY7)Z 2YY%)Z 85 2YY-)Z 2YY3)Z 2YY/)Z 100 I2tI 2t Value for fusing t p NT 2YY7)Z 2YY%)Z A2s2YY-)Z 2YY3)Z 2YY/)Z di/dt Critical rate of rise of on-state current G )[ TJ = 125°C A/μs IGTM Peak gate trigger current tP c 10 μs; IGT c IGTM TJ = 125°C 2YY7)Z 2YY%)Z A2YY-)Z 2YY3)Z 2YY/)Z 2.0 PG(AV) Average gate power dissipation TJ = 125°C IGT = 10mA 2YY7)Z 2YY%)Z 0.4 W IGT 2YY-)Z 2YY3)Z 2YY/)Z 0.5 Tstg Storage temperature range -40 to 150 °C TJ Operating junction temperature range -40 to 125 °C /PUFYY WPMUBHF Z TFOTJUJWJUZ Electrical Characteristics (TJ = 25°C, unless otherwise specified) — Sensitive T riac (4 Quadrants) Symbol Test Conditions Quadrant Lxx08x6 Lxx08x8 Unit IGT VD = 12V RL IV MAX. 5 20 mA VGT ALL MAX. V VGD VD = VDRM RL L8 TJ = 110°C ALL .*/ 0.2 V I) IT = 100mA MAX. 10 20 mA dv/dt V D = VDRM Gate Open TJ = 100°C 400V TYP . V/μs 7 20 (dv/dt)c EJEU D "NT5J = 110°C TYP . 2 2 V/μs tgt IG = 100mA PW = 15μs IT " QL TYP . μs /PUFYY WPMUBHF Y QBDLBHF Z TFOTJUJWJUZ

Revised: July 29, 2010 12:24 PM ©2010 Littelfuse, Inc T eccor® brand Thyristors Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Lxx08xx & Qxx08xx & Qxx08xHx Series Electrical Characteristics (TJ = 25°C, unless otherwise specified) — Standard T riac Symbol Test Conditions Quadrant Qxx08x4 Qxx08x5 Unit IGT VD = 12V RL IV MAX. TYP . mA VGD VD = VDRM RL L8 TJ = 125°C ALL .*/ 0.2 V I) IT = 200mA MAX. 50 50 mA dv/dt V D = VDRM Gate Open TJ = 125°C 400V .*/ 150 V/μs 7 125 800V 100 1000V 80 (dv/dt)c EJEU D "NT5J = 125°C TYP . 4 4 V/μs tgt IG = 100mA PW = 15μs IT " QL TYP . μs Electrical Characteristics (TJ = 25°C, unless otherwise specified) — Alternistor T riac (3 Quadrants) Symbol Test Conditions Quadrant Qxx08xH3 Qxx08xH4 Unit IGT VD = 12V RL VGD VD = VDRM RL I) IT = 100mA MAX. 15 mA dv/dt V D = VDRM Gate Open TJ = 125°C 2YY-)Z 2YY3)Z 2YY/)Z .*/ 400V 400 V/μs 7 50 800V 200 1000V 100 2YY7)Z 2YY%)Z 400V 450 7 50 800V 250 1000V 150 (dv/dt)c EJEU D "NT5J = 125°C .*/ 20 25 V/μs tgt IG = 100mA PW = 15μs IT " QL TYP . 4.0 4.0 μs /PUFYY WPMUBHF Y QBDLBHF Z TFOTJUJWJUZ

79©2010 Littelfuse, Inc Revised: July 29, 2010 12:24 PM T eccor® brand Thyristors Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. T eccor® brand Thyristors Lxx08xx & Qxx08xx & Qxx08xHx Series 8.0A TRIACs Static Characteristics Symbol Test Conditions Value Unit VTM ITM "Up ˜T MAX. V IDRM IRRM VDRM = VRRM -YYYZ TJ = 25°C 7 MAX. 20 μA TJ = 110°C 7 0.5 mA 2YYYZ TJ = 25°C 400 - 1000V 50 μA TJ = 125°C 400 - 800V 2 mA TJ = 100°C 1000V 2YYY)Z TJ = 25°C 400 - 800V 10 μA 1000V 20 TJ = 125°C 400 - 800V 2 mA TJ = 100°C 1000V Thermal Resistances Symbol Parameter Value Unit RR(J-C) Junction to case (AC) -2YY3ZZ -2YY/ZZ 1. 5 °C/W-2YY-ZZ 2.8 -2YY7ZZ 2.1 RR(J-A) Junction to ambient -2YY3ZZ 45 °C/W-2YY-ZZ 50 -2YY7ZZ /PUFYY WPMUBHF Y QBDLBHF Z TFOTJUJWJUZ ZZ UZQFTFOTJUJWJUZ Figure 2: Normalized DC Gate T rigger Current for All Quadrants vs. Junction T emperature Junction Temperature (TJ)- ºC -65 -40 -1 5 10 3 5 60 8 5 110 12 5 0.0 Ratio of IGT IGT (TJ = 25°C) 0.5 1.0 1.5 2.0 2.5 3.0 3.5 Figure 1: Definition of Quadrants /PUF"MUFSOJTUPSTXJMMOPUPQFSBUFJO2*7 MT2 POSITIVE (Positive Half Cycle) MT2 NEGATIVE (Negative Half Cycle) MT1 MT2 + IGT REF QII MT1 IGT GATE MT2 REF MT1 MT2 REF MT1 MT2 REF QI QIV QIII ALL POLARITIES ARE REFERENCED TO MT1 (-) IGT GATE (+) IGT - IGT GATE (-) IGT GATE (+)

Revised: July 29, 2010 12:24 PM ©2010 Littelfuse, Inc T eccor® brand Thyristors Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Lxx08xx & Qxx08xx & Qxx08xHx Series Figure 3: Normalized DC Holding Current vs. Junction T emperature Figure 4: Normalized DC Gate T rigger Voltage for All Quadrants vs. Junction T emperature Junction T emperature (TJ)- ºC -65 -40 -1 5 10 3 5 60 8 5 110 12 5 0.0 Ratio of IH IH (TJ = 25°C) 0.5 1.0 1.5 2.0 2.5 3.0 3.5 Junction T emperature (TJ)- ºC Ratio of VGT VGT (TJ = 25°C) -65 -40 -1 5 10 3 5 60 8 5 110 12 5 0.0 0.5 1.0 1.5 2.0 Figure 7: Maximum Allowable Case T emperature vs. On-State Current (Standard / Alternistor T riac) Figure 8: On-State Current vs. On-State Voltage (T ypical) TC = 25°C Postitive or Negative Instantaneous On-State Voltage (vT) - Volts Postitive or Negative Instantaneous On-State Current (iT) - Amps RMS On-State Current (IT(RMS)) - Amps 02468 1 0 Average On-State Power Dissipation (PD(AV)) - Watts Figure 5: Power Dissipation (T ypical) vs. RMS On-State Current Figure 6: Maximum Allowable Case T emperature vs. On-State Current (Sensitive T riac) RMS On-State Current (IT(RMS)) - Amps 01234 5 678 100 105 110 Maximum Allowable Case T emperature (TC) - °C Lxx08Vy Lxx08Dy Lxx08Ry Lxx08Ly CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 360 CASE TEMPERATURE: Measured as shown on Dimensional Drawings RMS On-State Current (IT(RMS)) - Amps 100 110 120 130 Maximum Allowable Case T emperature (TC) - °C 01234 5 678 Qxx08Lyy Qxx08Ryy Qxx08Nyy Qxx08Vyy Qxx08Dyy /PUFYY WPMUBHF Y QBDLBHF Z TFOTJUJWJUZ ZZ UZQFTFOTJUJWJUZ

81©2010 Littelfuse, Inc Revised: July 29, 2010 12:24 PM T eccor® brand Thyristors Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. T eccor® brand Thyristors Lxx08xx & Qxx08xx & Qxx08xHx Series 8.0A TRIACs Surge Current Duration- Full Cycles Peak Surge (Non-Repetitive) On-State Current (ITSM) - Amps 1 10 100 1000 100 L/Qxx08Ryy L/Qxx08Lyy L/Qxx08Nyy L/Qxx08Vyy L/Qxx08Dyy Figure 10: Surge Peak On-State Current vs. Number of Cycles 4611-:'3&26&/$:)[4JOVTPJEBM LOAD: Resistive RMS On-State Current: [I T(RMS)>.BYJNVN3BUFE Value at Specified Case Temperature /PUFT 1. Gate control may be lost during and immediately following surge current interval. 2. Overload may not be repeated until junction temperature has returned to steady-state rated value. Figure 9: Maximum Allowable Ambient T emperature vs. On-State Current RMS On-State Current (IT(RMS)) - Amps 100 120 Maximum Allowable Ambient T emperature (TA) - °C CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 360 FREE AIR RATING - NO HEATSINK L/Qxx08Lyy L/Qxx08Ryy L/Qxx08Vyy /PUFYY WPMUBHF Y QBDLBHF Z TFOTJUJWJUZ ZZ UZQFTFOTJUJWJUZ

Revised: July 29, 2010 12:24 PM ©2010 Littelfuse, Inc T eccor® brand Thyristors Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Lxx08xx & Qxx08xx & Qxx08xHx Series Soldering Parameters Reflow Condition 1Co'SFFBTTFNCMZ Pre Heat - Temperature Min (Ts(min)) 150°C - Temperature Max (Ts(max)) 200°C - Time (min to max) (ts) oTFDT Average ramp up rate (Liquidus Temp) (TL) to peak ¡$TFDPOENBY TS(max) to TL - Ramp-up Rate ¡$TFDPOENBY Reflow - Temperature (TL) (Liquidus) ¡$ - Temperature (tL) oTFDPOET Peak Temperature (TP) +0/-5 °C Time within 5°C of actual peak Temperature (tp) oTFDPOET Ramp-down Rate ¡$TFDPOENBY Time 25°C to peak Temperature (TP) NJOVUFT.BY Do not exceed 280°C Physical Specifications Environmental Specifications Test Specifications and Conditions AC Blocking (VDRM) .*-45% $POE""QQMJFE Peak AC voltage @ 125°C for 1008 hours T emperature Cycling .*-45% 100 cycles; -40°C to +150°C; 15-min dwell-time T emperature/ Humidity +&4%" IPVST 7%$¡$ rel humidity High T emp Storage .*-45% 1008 hours; 150°C Low-T emp Storage 1008 hours; -40°C Thermal Shock .*-45% 10 cycles; 0°C to 100°C; 5-min dwell- UJNFBUFBDIUFNQFSBUVSF TFD NBY transfer time between temperature Autoclave +&4%" IPVST ¡$BU"5.T BOE Resistance to Solder Heat .*-45%.FUIPE Solderability "/4*+45% DBUFHPSZ 5FTU" Lead Bend .*-45% .$POE& T erminal Finish .BUUF5JOQMBUFE Body Material 6-SFDPHOJ[FEFQPYZNFFUJOHnBNNBCJMJUZ DMBTTJmDBUJPO7 T erminal Material Copper Alloy Design Considerations Careful selection of the correct device for the application’s operating parameters and environment will go a long way UPXBSEFYUFOEJOHUIFPQFSBUJOHMJGFPGUIF5IZSJTUPS(PPE EFTJHOQSBDUJDFTIPVMEMJNJUUIFNBYJNVNDPOUJOVPVT DVSSFOUUISPVHIUIFNBJOUFSNJOBMTUPPGUIFEFWJDF rating. Other ways to ensure long life for a power discrete semiconductor are proper heat sinking and selection of voltage ratings for worst case conditions. Overheating, overvoltage (including dv/dt), and surge currents are the main killers of semiconductors. Correct mounting, soldering, and forming of the leads also help protect against component damage. Time Temperature TP TL TS(max) TS(min) tP tL tS time to peak temperature PreheatPreheat Ramp-upRamp-up Ramp-downRamp-do

83©2010 Littelfuse, Inc Revised: July 29, 2010 12:24 PM T eccor® brand Thyristors Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. T eccor® brand Thyristors Lxx08xx & Qxx08xx & Qxx08xHx Series 8.0A TRIACs Dimensions — TO-220AB (R-Package) — Non-Isolated Mounting T ab Common with Center Lead Dimension Inches Millimeters Min Max Min Max A 0.420 B 0.105 0.115 C 0.250 5.84 D & 0.142 ' 0.110 G 0.540 ) 0.025 J 0.205 5.21 K 0.105 2.41 L 1 .52 M 0.085 2.41 / 0.018 0.024 O 0.188 4.52 P 0.045 1. 14 1. 5 2 R 0.048 1 .22 Dimensions — TO-220AB (L-Package) — Isolated Mounting T ab Dimension Inches Millimeters Min Max Min Max A 0.420 B 0.105 0.115 C 0.250 5.84 D & 0.142 ' 0.110 G 0.540 ) 0.025 J 0.205 5.21 K 0.105 2.41 L 1 .52 M 0.085 2.41 / 0.018 0.024 O 0.188 4.52 P 0.045 1. 14 1. 5 2 R 0.048 1 .22 K J A H G B F E C D L R TC MEASURING POINT AREA (REF .) 0.17 IN 2 MT2 O P N M MT1 GATE .320 8.13 .526 13.36 .276 7. 0 1 K J A H G B F E C D L R TC MEASURING POINT MT2 MT2 O P N M MT1 .276 7. 0 1 .526 13.36 .320 8.13 GATE AREA (REF .) 0.17 IN2 NOTCH IN GATE LEAD TO ID. NON-ISOLATED TAB /PUF.BYJNVNUPSRVFUP be applied to mounting tab JTJOMCT /N /PUF.BYJNVNUPSRVFUP be applied to mounting tab JTJOMCT /N

Revised: July 29, 2010 12:24 PM ©2010 Littelfuse, Inc T eccor® brand Thyristors Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Lxx08xx & Qxx08xx & Qxx08xHx Series Dimensions — TO-263AB (N-Package) — D2-PAK Surface Mount Dimensions — TO-251AA (V-Package) — V-PAK Through Hole Dimension Inches Millimeters Min Typ Max Min Typ Max B 0.242 0.245 C D 0.205 0.208 5.21 5.41 & 0.255 ' 0.80 0.84 G 2.21 2.28 ) 0.085 2.41 I 0.180 0.184 J 0.018 0.020 0.51 0.58 K 0.040 0.044 1. 01 1. 12 L 0.018 0.020 0.52 0.58 P 0.042 0.052 1 .20 Q 0.044 1. 0 0 1. 11 R 0.044 1. 0 0 1. 11 S 0.084 2.00 2.11 Dimension Inches Millimeters Min .BY Min .BY A B 0.420 C 0.188 4.52 D 0.025 & 0.045 1. 14 1. 5 2 ' 1 .52 G 0.105 2.41 ) 0.102 J 0.018 0.024 K 0.110 S 15.88 V 0.045 1. 14 U 0.002 0.010 0.05 0.25 W 0.040 1 .02 G B A W V S MT1 MT2 TC MEASURING POINT C E K H J U .320 8.13 .276 7. 0 1 .331 8.41 GATE .460 1 1.68 .665 16.89 .260 6.60 .150 3.81 .080 2.03 .085 2.16 .055 1.40 .350 8.89 .276 7. 0 1 .276 7. 0 1 AREA: 0.1 1 IN D F AREA: 0.040 IN2TC MEASURING POINT GATE G I E D A B C F J H K L 5.28 .208 5.34 .210 MT2 MT1 MT2 P Q R S

85©2010 Littelfuse, Inc Revised: July 29, 2010 12:24 PM T eccor® brand Thyristors Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. T eccor® brand Thyristors Lxx08xx & Qxx08xx & Qxx08xHx Series 8.0A TRIACs Dimensions — TO-252AA (D-Package) — D-PAK Surface Mount Dimension Inches Millimeters Min Typ Max Min Typ Max A 0.040 0.050 1 .02 B 0.245 C 0.108 D 0.205 0.208 5.21 5.41 & 0.255 ' 0.80 0.84 G 2.21 2.28 ) 0.085 2.41 I 0.184 4.55 J 0.018 0.020 0.51 0.58 K 0.040 0.044 1 .02 1 .12 L 0.018 0.020 0.51 0.58 / 0.021 O0 ° 0 ° 5 ° 0 ° 0 ° 5 ° P 0.042 0.052 1 .20 Q 0.044 1. 0 0 1. 11 M O N HJ L K .1 18 .063 1.60 .071 1.80 .264 6.71.264 6.71 .181 4.60 GATE MT2 MT1 MT2 TC MEASURING POINT G I D E A B C F 5.28 .208 5.34 .210 : 0.040 IN2AREA P Q

Revised: July 29, 2010 12:24 PM ©2010 Littelfuse, Inc T eccor® brand Thyristors Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Lxx08xx & Qxx08xx & Qxx08xHx Series Product Selector Part Number Voltage (xx) Gate Sensitivity Quadrants Type Package 400V 600V 800V 1000V I – II – III IV -YY- X X 5 mA 10 mA Sensitive Triac TO-220L -YY% X X 5 mA 10 mA Sensitive Triac TO-252 D-PAK -YY3 X X 5mA 10mA Sensitive Triac TO-220R -YY7 X X 5 mA 10 mA Sensitive Triac TO-251 V-PAK -YY- X X 10 mA 20 mA Sensitive Triac TO-220L -YY% X X 10 mA 20 mA Sensitive Triac TO-252 D-PAK -YY3 X X 10mA 20mA Sensitive Triac TO-220R -YY7 X X 10 mA 20 mA Sensitive Triac TO-251 V-PAK 2YY3) X X 10 mA Alternistor Triac TO-220R 2YY7) X X 10 mA Alternistor Triac TO-251 V-PAK 2YY%) X X 10 mA Alternistor Triac TO-252 D-PAK 2YY/) X X 10 mA Alternistor Triac 50%2-PAK 2YY- X 25 mA Triac TO-220L 2YY3 X 25 mA Triac TO-220R 2YY/ X 25 mA Triac 50%¤1", 2YY-) XXX X N" Alternistor Triac TO-220L 2YY3) XXX X N" Alternistor Triac TO-220R 2YY7) XXX X N" Alternistor Triac TO-251 V-PAK 2YY%) XXX X N" Alternistor Triac TO-252 D-PAK 2YY/) XXX X N" Alternistor Triac 50%¤1", 2YY- X X X 50 mA Triac TO-220L 2YY3 X X X 50 mA Triac TO-220R 2YY/ X X X 50 mA Triac 50%¤1", Packing Options Part Number Marking Weight Packing Mode Base Quantity -2YY-3ZZ -2YY-3ZZ 2.2 g Bulk 500 -2YY-3ZZ51 -2YY-3ZZ 2.2 g Tube Pack 500 (50 per tube) 2YY/ZZ51 2YY/ZZ H Tube 500 (50 per tube) 2YY/ZZ31 2YY/ZZ H &NCPTTFE$BSSJFS 500 -2YY%ZZ51 -2YY%ZZ H Tube QFSUVCF -2YY%ZZ31 -2YY%ZZ H &NCPTTFE$BSSJFS 2500 -2YY7ZZ51 -2YY7ZZ 0.4 g Tube QFSUVCF /PUFYY WPMUBHF Y QBDLBHF Z TFOTJUJWJUZ ZZ UZQFTFOTJUJWJUZ

87©2010 Littelfuse, Inc Revised: July 29, 2010 12:24 PM T eccor® brand Thyristors Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. T eccor® brand Thyristors Lxx08xx & Qxx08xx & Qxx08xHx Series 8.0A TRIACs 0.512 (13.0) Arbor Hole Dia. DC XXXXXX XXXXXX DC XXXXXX DC XXXXXX XX XX XX Gate MT1 MT2 0.63 (16.0) 0.157 (4.0) 0.64 (16.3) 12.99 (330.0) 0.524 (13.3) 0.315 (8.0) 0.059 Dia(1.5) * Cover tape Direction of Feed Dimensions are in inches (and millimeters). Gate MT1 MT2 0.512 (13.0) Arbor Hole Dia. 0.945 (24.0) 0.63 (16.0) 1.01 (25.7) 12.99 (330.0) 0.827 (21.0) 0.157 (4.0) Direction of Feed Dimensions are in inches (and millimeters). * Cover tape 0.059 DIA(1.5) TO-252 Embossed Carrier Reel Pack (RP) Specifications Meets all EIA-481-2 Standards TO-263 Embossed Carrier Reel Pack (RP) Specifications Meets all EIA-481-2 Standards

Revised: July 29, 2010 12:24 PM ©2010 Littelfuse, Inc T eccor® brand Thyristors Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Lxx08xx & Qxx08xx & Qxx08xHx Series CURRENT 08: 8A SENSITIVITY & TYPE Sensitive Triac: 6 : 5 mA (QI, II, III) 10 mA (QIV) : 10 mA (QI, II, III) 20 mA (QIV) Standard Triac: : 25 mA (QI, II, III) 5 : 50 mA (QI, II, III) Alternistor Triac: : 10 mA (QI, II, III) H4 : 35 mA (QI, II, III) PACKAGE TYPE L : TO-220 Isolated R : TO-220 Non-Isolated N : TO-263 (D2PAK) V : TO-251 (VPAK) D : TO-252 (DPAK) VOLTAGE RATING 40 : 400V 60 : 600V 80 : 800V K0 : 1000V LEAD FORM DIMENSIONS xx : Lead Form Option Q 60 08 L 5 56 DEVICE TYPE L : Sensitive Triac Q : Triac or Alternistor Part Numbering System Part Marking System L6008V5 yxxxx TO-252AA – (D Package) TO-251AA – (V Package)