Q6006LH456 LITTELFUSE | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 14
Technical content
Revised: June 24, 2011 04:57 PM ©2011 Littelfuse, Inc T eccor® brand Thyristors Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information.
6 Amp Sensitive, Standard & Alternistor (High Commutation) Triacs
Lxx06xx & Qxx06xx & Qxx06xHx Series Lxx06xx & Qxx06xx & Qxx06xHx Series
Description
6 Amp bi-directional solid state switch series is designed
for AC switching and phase control applications such as motor speed and temperature modulation controls, lighting controls, and static switching relays. Sensitive type devices guarantee gate control in Quadrants I & IV needed for digital control circuitry. Standard type devices normally operate in Quadrants I & III triggered from AC line. Alternistor type devices only operate in quadrants I, II, & III and are used in circuits requiring high dv/dt capability. Features & Benefits
- RoHS compliant
- Glass – passivated junctions
- Voltage capability up to 1000 V
- Surge capability up to 85 A
- Electrically isolated “L - Package” is UL recognized for 2500Vrms
- Solid-state switching eliminates arcing or contact bounce that create voltage transients
- No contacts to wear out from reaction of switching events
- Restricted (or limited) RFI generation, depending on activation point of sine wave
- Requires only a small gate activation pulse in each half-cycle Main Features Symbol Value Unit IT(RMS) 6 A VDRM/VRRM 400 to 1000 V IGT (Q1) 5 to 50 mA Schematic Symbol MT2 MT1 G Agency Approval Agency Agency File Number ® L Package: E71639 Absolute Maximum Ratings — Sensitive T riac (4 Quadrants) Symbol Parameter Value Unit IT(RMS) RMS on-state current (full sine wave) Lxx06Ly TC = 80°C 6 ALxx06Vy / Lxx06Dy/ Lxx06Ry TC = 85°C ITSM Non repetitive surge peak on-state current (full cycle, TJ initial = 25°C) f = 50 Hz t = 20 ms 50 Af = 60 Hz t = 16.7 ms 60 I2t I2t Value for fusing tp = 8.3 ms 15 A2s di/dt Critical rate of rise of on-state current IG = 50mA with 0.1µs rise time f = 120 Hz TJ = 110°C 70 A/μs IGTM Peak gate trigger current tp ≤ 10 μs TJ = 110°C 1. 6 A PG(AV) Average gate power dissipation TJ = 110°C 0.4 W Tstg Storage temperature range -40 to 150 °C TJ Operating junction temperature range -40 to 110 °C Note: xx = voltage, y = sensitivity
Applications
Excellent for AC switching and phase control applications such as heating, lighting, and motor speed controls. Typical applications are AC solid-state switches, light dimmers, power tools, home/brown goods and white goods appliances. Alternistor Triacs (no snubber required) are used in applications with extremely inductive loads requiring highest commutation performance. Internally constructed isolated packages are offered for ease of heat sinking with highest isolation voltage.
Revised: June 24, 2011 04:57 PM ©2011 Littelfuse, Inc T eccor® brand Thyristors Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Lxx06xx & Qxx06xx & Qxx06xHx Series Absolute Maximum Ratings — Standard T riac Symbol Parameter Value Unit IT(RMS) RMS on-state current (full sine wave) Qxx06Ry / Qxx06Ny TC = 95°C 6 A Qxx06Ly TC = 90°C ITSM Non repetitive surge peak on-state current (full cycle, TJ initial = 25°C) f = 50 Hz t = 20 ms 65 A f = 60 Hz t = 16.7 ms 80 I2t I2t Value for fusing tp = 8.3 ms 26.5 A2s di/dt Critical rate of rise of on-state current IG = 200mA with 0.1µs rise time f = 120 Hz TJ = 125°C 70 A/μs IGTM Peak gate trigger current tp ≤ 10 μs; IGT ≤ IGTM TJ = 125°C 1. 6 A PG(AV) Average gate power dissipation TJ = 125°C 0.5 W Tstg Storage temperature range -40 to 150 °C TJ Operating junction temperature range -40 to 125 °C Note: xx = voltage, y = sensitivity Absolute Maximum Ratings — Alternistor T riac (3 Quadrants) Symbol Parameter Value Unit IT(RMS) RMS on-state current (full sine wave) Qxx06LHy TC = 95°C
6 AQxx06RHy / Qxx06NHy
Qxx06VHy / Qxx06DHy TC = 100°C ITSM Non repetitive surge peak on-state current (full cycle, TJ initial = 25°C) f = 50 Hz t = 20 ms Qxx06VHy Qxx06DHy 55 A Qxx06LHy Qxx06RHy Qxx06NHy f = 60 Hz t = 16.7 ms Qxx06VHy Qxx06DHy 65 Qxx06LHy Qxx06RHy Qxx06NHy I2t I2t Value for fusing tp = 8.3 ms Qxx06VHy Qxx06DHy 1 7. 5 A2sQxx06LHy Qxx06RHy Qxx06NHy di/dt Critical rate of rise of on-state current f = 120 Hz TJ = 125°C 70 A/μs IGTM Peak gate trigger current tp ≤ 10 μs; IGT ≤ IGTM TJ = 125°C 1. 6 A PG(AV) Average gate power dissipation TJ = 125°C 0.5 W Tstg Storage temperature range -40 to 150 °C TJ Operating junction temperature range -40 to 125 °C Note: xx = voltage, y = sensitivity
Revised: June 24, 2011 04:57 PM ©2011 Littelfuse, Inc T eccor® brand Thyristors Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Lxx06xx & Qxx06xx & Qxx06xHx Series Electrical Characteristics (TJ = 25°C, unless otherwise specified) — Sensitive T riac (4 Quadrants) Symbol Test Conditions Quadrant Value Unit Lxx06x5 Lxx06x6 Lxx06x8 IGT VD = 12V RL = 60 Ω I – II – III IV MAX. 5 20 mA VGT ALL MAX. 1. 3 V VGD VD = VDRM RL = 3.3 kΩ TJ = 110°C ALL MIN. 0.2 V IH IT = 100mA MAX. 10 10 20 mA dv/dt VD = VDRM Gate Open TJ = 100°C 400V TYP . 30 30 40 V/μs600V 20 20 30 (dv/dt)c (di/dt)c = 3.2 A/ms TJ = 110°C TYP . 1 2 2 V/μs Symbol Test Conditions Quadrant Value UnitQxx06x4 Qxx06x5 IGT VD = 12V RL = 60 Ω I – II – III IV MAX. TYP . 75 mA V GT I – II – III MAX. 1. 3 V VGD VD = VDRM RL = 3.3 kΩ TJ = 125°C ALL MIN. 0.2 V IH IT = 200mA MAX. 50 50 mA dv/dt VD = VDRM Gate Open TJ = 125°C 400V MIN. 120 V/μs 600V 100 800V 85 VD = VDRM Gate Open TJ = 100°C 1000V 100 (dv/dt)c (di/dt)c = 3.2 A/ms TJ = 125°C TYP . 4 4 V/μs tgt IG = 2 x IGT PW = 15µs IT = 8.5 A(pk) TYP . 3.0 3.0 μs Electrical Characteristics (TJ = 25°C, unless otherwise specified) — Alternistor T riac (3 Quadrants) Symbol Test Conditions Quadrant Value UnitQxx06xH3 Qxx06xH4 IGT VD = 12V RL = 60 Ω I – II – III MAX. 10 35 mA VGT I – II – III MAX. 1. 3 V VGD VD = VDRM RL = 3.3 kΩ TJ = 125°C I – II – III MIN. 0.2 V IH IT = 100mA MAX. 15 35 mA dv/dt VD = VDRM Gate Open TJ = 125°C Qxx06VHy / Qxx06DHy MIN. 400V 75 400 V/μs 600V 50 300 800V 200 Qxx06LHy / Qxx06RHy / Qxx06NHy 400V 75 450 600V 50 350 800V 250 VD = VDRM Gate Open TJ = 100°C ALL 1000V 150 (dv/dt)c (di/dt)c = 3.2 A/ms TJ = 125°C MIN. 20 25 V/μs tgt IG = 2 x IGT PW = 15µs IT = 8.5 A(pk) TYP . 4.0 4.0 μs Note: xx = voltage, x = package, y = sensitivity Electrical Characteristics (TJ = 25°C, unless otherwise specified) — Standard T riac
Revised: June 24, 2011 04:57 PM ©2011 Littelfuse, Inc T eccor® brand Thyristors Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Lxx06xx & Qxx06xx & Qxx06xHx Series Static Characteristics Symbol Test Conditions Value Unit VTM ITM = 11 .3A tp = 380 µs MAX. 1 .60 V IDRM / IRRM VDRM = VRRM Lxx06xy TJ = 25°C 400 - 600V MAX. 20 μA TJ = 110°C 400 - 600V 0.5 mA Qxx06xy TJ = 25°C 400 - 1000V 50 μA TJ = 125°C 400 - 800V 2 mA TJ = 100°C 1000V 3 Qxx06xHy TJ = 25°C 400 - 800V 10 μA 1000V 20 TJ = 125°C 400 - 800V 3 mA TJ = 100°C 1000V 2 Thermal Resistances Symbol Parameter Value Unit Rθ(J-C) Junction to case (AC) L/Qxx06Ryy / L/Qxx06Nyy 1. 8 °C/WL/Qxx06Lyy 3.3 L/Qxx06Vyy / L/Qxx06Dyy 3.2 Rθ(J-A) Junction to ambient L/Qxx06Ryy 45 °C/WL/Qxx06Lyy 50 L/Qxx06Vyy 70 Note: xx = voltage, x = package, y = sensitivity, yy = type & sensitivity Figure 1: Definition of Quadrants Figure 2: Normalized DC Gate T rigger Current for All Quadrants vs. Junction T emperature Junction Temperature (TJ)- °C -65 -40 -151 03 56 08 51 10 125 4.0 3.0 2.0 1.0 0.0 Ratio of IGT IGT (TJ = 25°C) Note: Alternistors will not operate in QIV MT2 POSITIVE (Positi ve Half Cycle) MT2 NEGATIVE (Negative Half Cycle) NOTE: Alternistor s will not operate in QIV MT1 MT2 + IGT REF QII MT1 IGT GATE MT2 REF MT1 MT2 REF MT1 MT2 REF QI QIV QIII ALL POLARITIES ARE REFERENCED TO MT1 (-) IGT GATE (+) IGT - IGT GATE (-) IGT GATE (+)
Revised: June 24, 2011 04:57 PM ©2011 Littelfuse, Inc T eccor® brand Thyristors Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Lxx06xx & Qxx06xx & Qxx06xHx Series Figure 3: Normalized DC Holding Current vs. Junction T emperature Figure 4: Normalized DC Gate T rigger Voltage for All Quadrants vs. Junction T emperature Junction Temperature (TJ)- °C -65 -40 -151 03 56 08 51 10 125 4.0 3.0 2.0 1.0 0.0 Ratio of IH IH (TJ = 25°C) Junction Temperature (TJ)- ºC Ratio of VGT VGT (TJ = 25°C) 110 12585603510-40-40-65 2.0 0.0 0.5 1.0 1.5 Figure 7: Maximum Allowable Case T emperature vs. On-State Current (Standard T riac) Figure 8: Maximum Allowable Case T emperature vs. On-State Current (Alternistor T riac) RMS On-State Current (IT(RMS)) - Amps 76543210 130 120 110 100 Maximum Allowable Case Temperature (TC) - °C Qxx06RHy Qxx06NHy Qxx06VHy Qxx06DHy Qxx06LHy CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 360° CASE TEMPERATURE: Measured as shown on Dimensional Drawings RMS On-State Current (IT(RMS)) - Amps 02468 10 12 14 16 Average On-State Power Dissipation (PD(AV)) - Watts CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 360° Figure 5: Power Dissipation (T ypical) vs. RMS On-State Current Figure 6: Maximum Allowable Case T emperature vs. On-State Current (Sensitive T riac) RMS On-State Current (IT(RMS)) - Amps 76543210 120 110 100 Maximum Allowable Case Temperature (TC) - °C Lxx06Vy Lxx06Dy Lxx06Ry Lxx06Ly CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 360° CASE TEMPERATURE: Measured as shown on Dimensional Drawings RMS On-State Current (IT(RMS)) - Amps 76543210 130 120 110 100 Maximum Allowable Case Temperature (TC) - °C Qxx06Ly CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 360° CASE TEMPERATURE: Measured as shown on Dimensional Drawings Qxx06Ry Qxx06Ny
Revised: June 24, 2011 04:57 PM ©2011 Littelfuse, Inc T eccor® brand Thyristors Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Lxx06xx & Qxx06xx & Qxx06xHx Series Figure 9: Maximum Allowable Ambient T emperature vs. On-State Current (Sensitive / Standard T riac) Figure 10: Maximum Allowable Ambient T emperature vs. On-State Current (Alternistor T riac) RMS On-State Current [IT(RMS)] - Amps 120 100 Maximum Allowable Ambient Temperature (TA) - °C CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 360° CASE TEMPERATURE: Measured as shown on Dimensional Drawing Qxx06LHy Qxx06RHy Qxx06NHy Qxx06VHy RMS On-State Current (IT(RMS)) - Amps 120 100 Maximum Allowable Ambient Temperature (TA) - °C Qxx06Ly Qxx06Ry Qxx06Ny Lxx06Ly Lxx06Ry L/Qxx06Vy CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 360° FREE AIR RATING – NO HEATSINK Figure 11: On-State Current vs. On-State Voltage (T ypical) TC = 25°C Postitive or Negative Instantaneous On-State Voltage (vT) - Volts Postitive or Negative Instantaneous On-State Current (iT) - Amps
Revised: June 24, 2011 04:57 PM ©2011 Littelfuse, Inc T eccor® brand Thyristors Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Lxx06xx & Qxx06xx & Qxx06xHx Series Surge Current Duration- Full Cycles Peak Surge (Non-Repetitive) On-State Current (ITSM) - Amps 11 01 00 1000 100 Qxx06Ly Qxx06Ry Qxx06Ny Lxx06Ly Lxx06Ry Lxx06Vy Lxx06Dy Figure 12: Surge Peak On-State Current vs. Number of Cycles (Sensitive / Standard T riac) SUPPLY FREQUENCY: 60 Hz Sinusoidal LOAD: Resistive RMS On-State Current: [IT(RMS)]: Maximum Rated Value at Specified Case Temperature Notes: 1. Gate control may be lost during and immediately following surge current interval. 2. Overload may not be repeated until junction temperature has returned to steady-state rated value. Surge Current Duration- Full Cycles Peak Surge (Non-Repetitive) On-State Current (ITSM) - Amps 11 01 00 1000 100 Qxx06LHy Qxx06RHy Qxx06NHy Qxx06VHy Qxx06DHy Figure 13: Surge Peak On-State Current vs. Number of Cycles (Alternistor T riac) SUPPLY FREQUENCY: 60 Hz Sinusoidal LOAD: Resistive RMS On-State Current: [IT(RMS)]: Maximum Rated Value at Specified Case Temperature Notes: 1. Gate control may be lost during and immediately following surge current interval. 2. Overload may not be repeated until junction temperature has returned to steady-state rated value. Note: xx = voltage, x = package, y = sensitivity, yy = type & sensitivity
Revised: June 24, 2011 04:57 PM ©2011 Littelfuse, Inc T eccor® brand Thyristors Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Lxx06xx & Qxx06xx & Qxx06xHx Series Soldering Parameters Reflow Condition Pb – Free assembly Pre Heat - Temperature Min (Ts(min)) 150°C - Temperature Max (Ts(max)) 200°C - Time (min to max) (ts) 60 – 180 secs Average ramp up rate (Liquidus Temp) (TL) to peak 5°C/second max TS(max) to TL - Ramp-up Rate 5°C/second max Reflow - Temperature (TL) (Liquidus) 217°C - Temperature (tL) 60 – 150 seconds Peak Temperature (TP) 260+0/-5 °C Time within 5°C of actual peak Temperature (t p) 20 – 40 seconds Ramp-down Rate 5°C/second max Time 25°C to peak Temperature (TP) 8 minutes Max. Do not exceed 280°C Physical Specifications Environmental Specifications Test Specifications and Conditions AC Blocking (VDRM) MIL-STD-750, M-1040, Cond A Applied Peak AC voltage @ 125°C for 1008 hours T emperature Cycling MIL-STD-750, M-1051, 100 cycles; -40°C to +150°C; 15-min dwell-time T emperature/ Humidity EIA / JEDEC, JESD22-A101 1008 hours; 320V - DC: 85°C; 85% rel humidity High T emp Storage MIL-STD-750, M-1031, 1008 hours; 150°C Low-T emp Storage 1008 hours; -40°C Thermal Shock MIL-STD-750, M-1056 10 cycles; 0°C to 100°C; 5-min dwell- time at each temperature; 10 sec (max) transfer time between temperature Autoclave EIA / JEDEC, JESD22-A102 168 hours (121°C at 2 ATMs) and 100% R/H Resistance to Solder Heat MIL-STD-750 Method 2031 Solderability ANSI/J-STD-002, category 3, Test A Lead Bend MIL-STD-750, M-2036 Cond E T erminal Finish 100% Matte Tin-plated Body Material UL recognized epoxy meeting flammability classification 94V-0 T erminal Material Copper Alloy Design Considerations Careful selection of the correct device for the application’s operating parameters and environment will go a long way toward extending the operating life of the Thyristor. Good design practice should limit the maximum continuous current through the main terminals to 75% of the device rating. Other ways to ensure long life for a power discrete semiconductor are proper heat sinking and selection of voltage ratings for worst case conditions. Overheating, overvoltage (including dv/dt), and surge currents are the main killers of semiconductors. Correct mounting, soldering, and forming of the leads also help protect against component damage. Time Temperature TP TL TS(max) TS(min) tP tL tS time to peak temperature PreheatPreheat Ramp-upRamp-up Ramp-downRamp-do
Revised: June 24, 2011 04:57 PM ©2011 Littelfuse, Inc T eccor® brand Thyristors Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Lxx06xx & Qxx06xx & Qxx06xHx Series Dimensions — TO-220AB (R-Package) — Non-Isolated Mounting T ab Common with Center Lead Dimension Inches Millimeters Min Max Min Max A 0.380 0.420 9.65 10.67 B 0.105 0.115 2.67 2.92 C 0.230 0.250 5.84 6.35 D 0.590 0.620 14.99 15.75 E 0.142 0.147 3.61 3.73 F 0.110 0.130 2.79 3.30 G 0.540 0.575 13.72 14.61 H 0.025 0.035 0.64 0.89 J 0.195 0.205 4.95 5.21 K 0.095 0.105 2.41 2.67 L 0.060 0.075 1 .52 1 .91 M 0.085 0.095 2.16 2.41 N 0.018 0.024 0.46 0.61 O 0.178 0.188 4.52 4.78 P 0.045 0.060 1. 14 1 .52 R 0.038 0.048 0.97 1 .22 Dimensions — TO-220AB (L-Package) — Isolated Mounting T ab Dimension Inches Millimeters Min Max Min Max A 0.380 0.420 9.65 10.67 B 0.105 0.115 2.67 2.92 C 0.230 0.250 5.84 6.35 D 0.590 0.620 14.99 15.75 E 0.142 0.147 3.61 3.73 F 0.110 0.130 2.79 3.30 G 0.540 0.575 13.72 14.61 H 0.025 0.035 0.64 0.89 J 0.195 0.205 4.95 5.21 K 0.095 0.105 2.41 2.67 L 0.060 0.075 1 .52 1 .91 M 0.085 0.095 2.16 2.41 N 0.018 0.024 0.46 0.61 O 0.178 0.188 4.52 4.78 P 0.045 0.060 1. 14 1 .52 R 0.038 0.048 0.97 1 .22 K J A H G B F Ø E C D L R TC MEASURING POINT AREA (REF.) 0.17 IN2 MT2 O P N M MT1 GATE .320 8.13 .526 13.36 .276 7.01 K J A H G B F Ø E C D L R TC MEASURING POINT MT2 MT2 O P N M MT1 .276 7.01 .526 13.36 .320 8.13 GATE AREA (REF.) 0.17 IN2 NOTCH IN GATE LEAD TO ID. NON-ISOLATED TAB Note: Maximum torque to be applied to mounting tab is 8 in-lbs, (0.904 Nm). Note: Maximum torque to be applied to mounting tab is 8 in-lbs, (0.904 Nm).
Revised: June 24, 2011 04:57 PM ©2011 Littelfuse, Inc T eccor® brand Thyristors Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Lxx06xx & Qxx06xx & Qxx06xHx Series Dimensions — TO-263AB (N-Package) — D2-PAK Surface Mount Dimensions — TO-251AA (V-Package) — V-PAK Through Hole Dimension Inches Millimeters Min Typ Max Min Typ Max Dimension Inches Millimeters Min Max Min Max A 0.360 0.370 9.14 9.40 B 0.380 0.420 9.65 10.67 C 0.178 0.188 4.52 4.78 D 0.025 0.035 0.64 0.89 E 0.045 0.060 1. 14 1 .52 F 0.060 0.075 1 .52 1 .91 G 0.095 0.105 2.41 2.67 H 0.092 0.102 2.34 2.59 J 0.018 0.024 0.46 0.61 K 0.090 0.110 2.29 2.79 S 0.590 0.625 14.99 15.88 V 0.035 0.045 0.89 1. 14 U 0.002 0.010 0.05 0.25 W 0.040 0.070 1 .02 1 .78 G B A W V S MT1 MT2 TC MEASURING POINT C E K H J U .320 8.13 .276 7.01 .331 8.41 GATE .460 11.68 .665 16.89 .260 6.60 .150 3.81 .080 2.03 .085 2.16 .055 1.40 .350 8.89 .276 7.01 .276 7.01 AREA: 0.11 IN2 D F AREA: 0.040 IN2TC MEASURING POINT GATE G I E D A B C F J H K L 5.28 .208 5.34 .210 MT2 MT1 MT2 P Q R S
Revised: June 24, 2011 04:57 PM ©2011 Littelfuse, Inc T eccor® brand Thyristors Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Lxx06xx & Qxx06xx & Qxx06xHx Series Dimensions — TO-252AA (D-Package) — D-PAK Surface mount Dimension Inches Millimeters Min Typ Max Min Typ Max M O N HJ L K .118 .063 1.60 .071 1.80 .264 6.71 .264 6.71 .181 4.60 GATE MT2 MT1 MT2 TC MEASURING POINT G I D E A B C F 5.28 .208 5.34 .210 : 0.040 IN2AREA P Q
Revised: June 24, 2011 04:57 PM ©2011 Littelfuse, Inc T eccor® brand Thyristors Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Lxx06xx & Qxx06xx & Qxx06xHx Series Product Selector Packing Options Part Number Voltage Gate Sensitivity Quadrants Type Package 400V 600V 800V 1000V I - II - III IV Lxx06L5 X X 5 mA 5 mA Sensitive Triac TO-220L Lxx06D5 X X 5 mA 5 mA Sensitive Triac TO-252 D-PAK Lxx06R5 X X 5mA 5mA Sensitive Triac TO-220R Lxx06V5 X X 5 mA 5 mA Sensitive Triac TO-251 V-PAK Lxx06L6 X X 5 mA 10 mA Sensitive Triac TO-220L Lxx06D6 X X 5 mA 10 mA Sensitive Triac TO-252 D-PAK Lxx06R6 X X 5mA 10mA Sensitive Triac TO-220R Lxx06V6 X X 5 mA 10 mA Sensitive Triac TO-251 V-PAK Lxx06L8 X X 10 mA 20 mA Sensitive Triac TO-220L Lxx06D8 X X 10 mA 20 mA Sensitive Triac TO-252 D-PAK Lxx06R8 X X 10mA 20mA Sensitive Triac TO-220R Lxx06V8 X X 10 mA 20 mA Sensitive Triac TO-251 V-PAK Qxx06VH3 X X 10 mA Alternistor Triac TO-251 V-PAK Qxx06DH3 X X 10 mA Alternistor Triac TO-252 D-PAK Qxx06L4 X 25 mA Standard Triac TO-220L Qxx06R4 X 25 mA Standard Triac TO-220R Qxx06N4 X 25 mA Standard Triac TO-263 D²-PAK Qxx06RH3 X X 10mA Alternistor Triac TO-220R Qxx06LH4 X X X X 35 mA Alternistor Triac TO-220L Qxx06RH4 X X X X 35 mA Alternistor Triac TO-220R Qxx06VH4 X X X X 35 mA Alternistor Triac TO-251 V-PAK Qxx06DH4 X X X X 35 mA Alternistor Triac TO-252 D-PAK Qxx06NH4 X X X X 35 mA Alternistor Triac TO-263 D²-PAK Qxx06L5 X X X 50 mA Standard Triac TO-220L Qxx06R5 X X X 50 mA Standard Triac TO-220R Qxx06N5 X X X 50 mA Standard Triac TO-263 D²-PAK Part Number Marking Weight Packing Mode Base Quantity Lxx06L/Ry Lxx06L/Ry 2.2 g Bulk 500 Lxx06L/RyTP Lxx06L/Ry 2.2 g Tube Pack 500 (50 per tube) Lxx06DyTP Lxx06Dy 0.3 g Tube 750 (75 per tube) Lxx06DyRP Lxx06Dy 0.3 g Embossed Carrier 2500 Lxx06VyTP Lxx06Vy 0.4 g Tube 750 (75 per tube) Qxx06L/Ryy Qxx06L/Ryy 2.2 g Bulk 500 Qxx06L/RyyTP Qxx06L/Ryy 2.2 g Tube Pack 500 (50 per tube) Qxx06NyyTP Qxx06Nyy 1 .6 g Tube 500 (50 per tube) Qxx06NyyRP Qxx06Nyy 1 .6 g Embossed Carrier 500 Qxx06DyyTP Qxx06Dyy 0.3 g Tube 750 (75 per tube) Qxx06DyyRP Qxx06Dyy 0.3 g Embossed Carrier 2500 Qxx06VyyTP Qxx06Vyy 0.4 g Tube 750 (75 per tube) Note: xx = voltage; yy = sensitivity
Revised: June 24, 2011 04:57 PM ©2011 Littelfuse, Inc T eccor® brand Thyristors Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Lxx06xx & Qxx06xx & Qxx06xHx Series 0.512 (13.0) Arbor Hole Dia. DC XXXXXX XXXXXX DC XXXXXX DC XXXXXX XX XX XX Gate MT1 MT2 0.63 (16.0) 0.157 (4.0) 0.64 (16.3) 12.99 (330.0) 0.524 (13.3) 0.315 (8.0) 0.059 DIA(1.5) * Cover tape Direction of Feed Dimensions are in inches (and millimeters). Gate MT1 MT2 0.512 (13.0) Arbor Hole Dia. 0.945 (24.0) 0.63 (16.0) 1.01 (25.7) 12.99 (330.0) 0.827 (21.0) 0.157 (4.0) Direction of Feed Dimensions are in inches (and millimeters). * Cover tape 0.059 DIA(1.5) TO-252 Embossed Carrier Reel Pack (RP) Specifications Meets all EIA-481-2 Standards TO-263 Embossed Carrier Reel Pack (RP) Specifications Meets all EIA-481-2 Standards
Revised: June 24, 2011 04:57 PM ©2011 Littelfuse, Inc T eccor® brand Thyristors Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Lxx06xx & Qxx06xx & Qxx06xHx Series Part Numbering System Part Marking System CURRENT 06: 6A SENSITIVITY & TYPE Sensitive Triac: 3 : 3 mA (QI, II, III, IV) 5 : 5 mA (QI, II, III, IV) 6 : 5 mA (QI, II, III) 10 mA (QIV) 8 : 10 mA (QI, II, III) 20 mA (QIV) Standard Triac: 4 : 25 mA (QI, II, III) 5 : 50 mA (QI, II, III) Alternistor Triac: H3 : 10 mA (QI, II, III) H4 : 35 mA (QI, II, III) PACKAGE TYPE L : TO-220 Isolated R : TO-220 Non-Isolated N : TO-263 (D2PAK) V : TO-251 (VPAK) D : TO-252 (DPAK) VOLTAGE RATING 40 : 400V 60 : 600V 80 : 800V K0 : 1000V LEAD FORM DIMENSIONS xx : Lead Form Option Q 60 06 L H4 56 DEVICE TYPE L : Sensitive Triac Q : Triac or Alternistor MY MY Q6006R5 L6006V5 YMLDD TO-252AA –( D Package) TO-251AA –( V Package)