Q45XDN BANNER | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 8

Technical content

Features

WARNING . . . Not To Be Used for Personnel Protection Never use this product as a sensing device for personnel protection. Doing so could lead to serious injury or death. This product does NOT include the self-checking redundant circuitry necessary to allow its use in personnel safety applications. A sensor failure or malfunction can cause either an energized or de-energized sensor output condition. Consult yo ur current Banner Safety Products catalog for safety products which meet OSHA, ANSI and IEC standards for personnel protection.

2 P/N 46655 rev. C Banner Engineering Corp. • Minneapolis, MN U.S.A. www.bannerengineering.com • Tel: 763.544.3164 Infrared, 880 nm P Visible Red, 680 nm Retroreflective Mode Models Models Focus Cable Supply Voltage I/O Support Excess Gain Beam Pattern Non-Polarized 100 1000 .10 m .33 ft 1.0 m 3.3 ft 10 m 33 ft .01 m .033 ft E X C E S S G A I N DISTANCE Q45LV Retroreflective Mode With BRT-3 Reflector 12 m 40 ft 15 m 50 ft 9 m 30 ft 6 m 20 ft 3 m 10 ft 25 mm 50 mm 75 mm 25 mm 50 mm 75 mm 1.0 in 2.0 in 3.0 in 1.0 in 2.0 in 3.0 in DISTANCE Q45LV Retroreflective Mode With BRT-3 ReflectorQ45XDN1LVQ6 80 mm to 9 m (3" to 30') 5-pin Euro QD 11-25V dc Bit Strobe Polarized 100 1000 .10 m .33 ft 1.0 m 3.3 ft 10 m 33 ft .01 m .033 ft E X C E S S G A I N DISTANCE Q45LP Retroreflective Mode With BRT-3 Reflector 6 m 20 ft 7.5 m 25 ft 4.5 m 15 ft 3 m 10 ft 1.5 m 5 ft 25 mm 50 mm 75 mm 25 mm 50 mm 75 mm 1.0 in 2.0 in 3.0 in 1.0 in 2.0 in 3.0 in DISTANCE Q45LP Retroreflective Mode With BRT-3 Reflector Q45XDN1LPQ6 150 mm to 6 m (6" to 20') 5-pin Euro QD 11-25V dc Bit Strobe Opposed-Mode Emitter (E) and Receiver (R) Models Models Focus Cable Supply Voltage I/O Support Excess Gain Beam Pattern Effective Beam: 13 mm Q45XDN1EQ6 60 m (200') 5-pin Euro QD 11-25V dc Emitter Only Q45XDN1RQ6 Bit Strobe 100 1.0 m 3.3 ft 10 m 33 ft 100 m 330 ft 0.1 m 0.33 ft E X C E S S G A I N DISTANCE 1000 Q45E/R Opposed Mode 48 m 160 ft 60 m 200 ft 36 m 120 ft 24 m 80 ft 12 m 40 ft 0.5 m 1.0 m 1.5 m 0.5 m 1.0 m 1.5 m 20 in 40 in 60 in 20 in 40 in 60 in DISTANCE Q45E/R Opposed Mode Q45XDN2RQ6 Change of State Q45XDN2LVQ6 Change of State Q45XDN2LPQ6 Change of State

P/N 46655 rev. C 3 Banner Engineering Corp. • Minneapolis, MN U.S.A. www.bannerengineering.com • Tel: 763.544.3164 Infrared, 880 nm Visible Red, 680 nm Diffuse Mode Models Models Focus Cable Supply Voltage Excess Gain Beam Pattern Short-Range Diffuse Q45XDN1DQ6 450 mm (18") 5-pin Euro QD 11-25V dc Long-Range Diffuse Q45XDN1DLQ6 1.8 m (6') 5-pin Euro QD 11-25V dc 100 10 mm 0.4 in 100 mm 4.0 in 1000 mm 40 in 1.0 mm 0.04 in 1000 E X C E S S G A I N DISTANCE Q45D Diffuse Mode 500 mm 20.0 in 400 mm 16.0 in 300 mm 12.0 in 200mm 8.0 in 100 mm 4.0 in 5 mm 10 mm 15 mm 5 mm 10 mm 15 mm 0.2 in 0.4 in 0.6 in 0.2 in 0.4 in 0.6 in DISTANCE Q45D Diffuse Mode 100 1000 .10 m .33 ft 1.0 m 3.3 ft 10 m 33 ft .01 m .033 ft E X C E S S G A I N DISTANCE Q45DL Diffuse Mode 2.4 m 8 ft 3.0 m 10 ft 1.8 m 6 ft 1.2 m 4 ft 0.6 m 2 ft 25 mm 50 mm 75 mm 25 mm 50 mm 75 mm 1.0 in 2.0 in 3.0 in 1.0 in 2.0 in 3.0 in DISTANCE Q45DL Diffuse Mode Performance based on 90% reflectance white test card Convergent Mode Models Models Focus Cable Supply Voltage Excess Gain Beam Pattern Q45XDN1CVQ6 38 mm (1.5 in) 5-pin Euro QD 11-25V dc Q45XDN1CV4Q6 100 mm (4 in) 5-pin Euro QD 11-25V dc 100 10 mm .4 in 100 mm 4 in 1000 mm 40 in 1 mm .04 in 1000 E X C E S S G A I N DISTANCE Q45CV Convergent Mode 100 10 mm .4 in 100 mm 4 in 1000 mm 40 in 1 mm .04 in 1000 E X C E S S G A I N DISTANCE Q45CV4 Convergent Mode 190 mm 7.5 in 150 mm 6.0 in 113 mm 4.5 in 75 mm 3.0 in 38 mm 1.5 in 1.2 mm 2.5 mm 3.8 mm 1.2 mm 2.5 mm 3.8 mm 0.05 in 0.10 in 0.15 in 0.05 in 0.10 in 0.15 in DISTANCE Q45CV Convergent Mode 190 mm 7.5 in 150 mm 6.0 in 113 mm 4.5 in 75 mm 3.0 in 38 mm 1.5 in 1.2 mm 2.5 mm 3.8 mm 1.2 mm 2.5 mm 3.8 mm 0.05 in 0.10 in 0.15 in 0.05 in 0.10 in 0.15 in DISTANCE Q45CV4 Convergent Mode Performance based on 90% reflectance white test card Q45XDN2DQ6 Q45XDN2DLQ6 Q45XDN2CVQ6 Q45XDN2CV4Q6 I/O Support Bit Strobe Bit Strobe Change of State Change of State I/O Message Bit Strobe Bit Strobe Change of State Change of State

4 P/N 46655 rev. C Banner Engineering Corp. • Minneapolis, MN U.S.A. www.bannerengineering.com • Tel: 763.544.3164 Glass Fiber Optic Models Q45XDN2FQ6 Models Focus Cable Supply Voltage Excess Gain Beam Pattern Q45XDN1FQ6 Range varies by sensing mode and fiber optics used 5-pin Euro QD 11-25V dc 100 0.1 m 0.33 ft 1.0 m 3.3 ft 10 m 33 ft 0.01 m 0.03 ft 1000 E X C E S S G A I N DISTANCE Q45F Opposed Mode IT23S fibers IT13S fibers 2.0 m 75 in 1.6 m 60 in 1.2 m 45 in 0.8 m 30 in 0.4 m 15 in 50 mm 100 mm 150 mm 50 mm 100 mm 150 mm 2.0 in 4.0 in 6.0 in 2.0 in 4.0 in 6.0 in DISTANCE Q45F Opposed Mode IT23S Fibers IT13S Fibers Infrared, 880 nm Visible Red, 660 nm Diffuse mode performance based on 90% reflectance white test card 100 10 mm 0.4 in 100 mm 4.0 in 1000 mm 40 in 1 mm 0.04 in 1000 E X C E S S G A I N DISTANCE Q45F Diffuse Mode BT23S Fiber BT13S Fiber 125 mm 5 in 100 mm 4 in 75 mm 3 in 50 mm 2 in 25 mm 1 in 1.3 mm 2.5 mm 3.8 mm 1.3 mm 2.5 mm 3.8 mm 0.05 in 0.10 in 0.15 in 0.05 in 0.10 in 0.15 in DISTANCE Q45F Diffuse Mode BT23S Fiber BT13S Fiber Plastic Fiber Optic Models Q45XDN2FPQ6 Diffuse mode performance based on 90% reflectance white test cardModels Focus Cable Supply Voltage Excess Gain Beam Pattern Q45XDN1FPQ6 Range varies by sensing mode and fiber optics used 5-pin Euro QD 11-25V dc 100 10 mm 0.4 in 100 mm 4.0 in 1000 mm 40 in 1 mm 0.04 in 1000 E X C E S S G A I N DISTANCE Q45FP Opposed Mode PIT46U Fibers PIT26U Fibers 125 mm 5.0 in 100 mm 4.0 in 75 mm 3.0 in 50 mm 2.0 in 25 mm 1.0 in 15 mm 30 mm 45 mm 15 mm 30 mm 45 mm 0.6 in 1.2 in 1.8 in 0.6 in 1.2 in 1.8 in DISTANCE Q45FP Opposed Mode PIT46U Fibers PIT26U Fibers 100 1 mm 0.04 in 10 mm 0.4 in 100 mm 4 in 0.1 mm 0.004 in 1000 E X C E S S G A I N DISTANCE Q45FP Diffuse Mode PBT46U Fiber PBT26U Fiber 50 mm 2.0 in 40 mm 1.6 in 30 mm 1.2 in 20 mm 0.8 in 10 mm 0.4 in 6 mm 12 mm 18 mm 6 mm 12 mm 18 mm 0.25 in 0.50 in 0.75 in 0.25 in 0.50 in 0.75 in DISTANCE Q45FP Diffuse Mode PBT46U Fiber Bit Strobe I/O Message Change of State Bit Strobe I/O Message Change of State

P/N 46655 rev. C 5 Banner Engineering Corp. • Minneapolis, MN U.S.A. www.bannerengineering.com • Tel: 763.544.3164 Specifications Adjustments Multi-turn SENSITIVITY control on top of the sensor (beneath a transparent o-ring sealed cover) allows precise sensitivity setting (turn clockwise to increase gain); Internal switch must be in Light Operate (L/O) position, which is the factory setting Supply Protection Circuitry Protected against reverse polarity, transient voltages, and loss of ground. (none of these conditions will harm the sensor or interrupt communication on the network) Response Time 2 milliseconds; Total response time will also include the response time of the network Indicators On the sensor: Green and Red; visible through the transparent sensor top cover Green LED lights for dc power ON Red LED is Banner’s patented Alignment Indicating Device (AID™, U.S. patent #4356393) which lights whenever the sensor “sees” a light condition and superimposes a pulse rate which is proportional to the strength of the received light signal (the stronger the signal, the faster the pulse rate) On the 45DN Bus Card: Green and Red; visible through the transparent sensor top cover A bi-color LED indicates the status of the network. Green Steady Sensor on line, connected to master Flashing Sensor on line, address + baud rate are ok Red Steady Critical network fault or duplicate node address detected; wrong baud rate Flashing Minor or connection time-out fault Construction Molded PBT polyester thermoplastic polyester housing; molded acrylic lenses; stainless steel hardware. O-ring sealed transparent polycarbonate top cover. Environmental Rating IEC IP67; NEMA 6P Connections Euro-style DeviceNet™ -compatible quick-disconnect cables Operating Temperature -25° to +70°C (-13° to +158°F); Maximum relative humidity 95% (non-condensing) Supply Voltage and Current The sensor is powered by the bus network (11 to 25V dc @60 mA) Sensor Configuration The following features of the Q45XDN Series Sensors are programmable via the network with a configuration tool*: Feature Range Network Address 0-63 (default = 63) Baud Rate 125K, 250K, 500K (default = 125K) Operate Mode* Light Operate or Dark Operate (default = Light Operate) All Q45XDN models support: Explicit Message Connection:Required to Set and Get sensor Attributes Q45XDN1 supports the following connection type: Bit Strobe Connection: Responds to a master’s request. Q45XDN2 supports the following connection type: Change of State Connection (COS):Responds to a slave’s change of state. I/O Response is with the following 8-bit word of data: Bit: 0: 0 Output is OFF

1 Output is ON

Bit 1: 0 Alarm output is OFF

1 Alarm output is ON

Bits 2-7 Not Used: Always 0 *NOTES: Configuration may be simplified through use of an Electronic Data Sheet (Banner model EDS 40223). The Light/Dark Operate switch in the Q45 sensor must be set to the Light Operate position (the factory setting).

6 P/N 46655 rev. C Banner Engineering Corp. • Minneapolis, MN U.S.A. www.bannerengineering.com • Tel: 763.544.3164 See table at left 50.8 mm (2.00") 69.0 mm (2.72") 87.6 mm (3.45") 30.0 mm (1.18") 6.4 mm (0.25") Lens Centerline 7.1 mm (0.28") 5 mm (#10) Screw Clearance (2) 4-Pin 12mm Euro-style Quick Disconnect Connector External Thread M30 x 1.5 Transparent Cover (Gasketed) View: Sensing Status (Red) (all models except emitters) Power Suppy (Green) Raise to Access: Sensitivity (Gain) Adjustment 44.5 mm (1.75") A 30 mm jam nut is supplied for mounting Hookups

1 Shield

5 Communications -Blue

4 Communications +White

3 BUS power (-V)Black

2 BUS power (+V)Red

E (emitter), D (short-range diffuse), DL (long-range diffuse), LV (retroreflective), and R (receiver) 54.6 mm (2.15") CV and CV4 (convergent) 61.5 mm (2.42") LP (polarized retroreflective) 56.4 mm (2.30") F (glass fiber optic) 60.5 mm (2.38") FP (plastic fiber optic) 59.8 mm (2.35") Q45X Male Connector Male Pinout The Q45XDN sensor requires DeviceNet-compatible quick-disconnect cable which is available from various manufacturers, such as interlinkBT.

P/N 46655 rev. C 7 Banner Engineering Corp. • Minneapolis, MN U.S.A. www.bannerengineering.com • Tel: 763.544.3164 Mounting Brackets SMB30S SMB30C

  • 30 mm split clamp bracket
  • Black reinforced thermoplastic polyester
  • Includes stainless steel mounting hardware
  • 12-gauge, stainless steel, right angle mounting bracket with a curved mounting slot for versatility and orientation
  • Clearance for M6 ( 1/4") hardware SMB30MM
  • 30 mm, 12-gauge, stainless steel bracket with curved mounting slots for versatility and orientation
  • Clearance for M6 ( 1/4") hardware 63.5 mm (2.50") 50.8 mm (2.00") M5 x 0.8 x 30 mm Screw (2) Not Shown: (2) M5 x 0.8 x 60 mm screws are supplied for clamping bracket together 43.2 mm (1.70") 25.4 mm (1.00") 82.5 mm (3.25") 12.2 mm (0.48") 56.0 mm (2.20") 63.0 mm (2.48") 45.0 mm (1.77") 2.5 mm (0.10") 31.5 mm (1.24") Nut Plate M5 x 0.8 x 80 mm Screw (2) 13 mm (0.5") 13.5 mm (0.53") 35.1 mm (1.38") 35.1 mm (1.38") 69.9 mm (2.75") 7.1 mm .28 x 90° (2 Slots) R 25.4 mm (1.00") ø30.1 mm (1.19") 57.2 mm (2.25") 25.4 mm (1.00") 25.4 mm (1.00") ø 6.4 mm (0.25" dia.) 57.2 mm (2.25")

Q45XDN ™ WARRANTY: Banner Engineering Corp. warrants its products to be free from defects for one year. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture found to be defective at the time it is returned to the factory during the warranty period. This warranty does not cover damage or liability for the improper application of Banner products. This warranty is in lieu of any other warranty either expressed or implied. P/N 46655 rev. C