Q45BW13 BANNER | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 8
Technical content
Universal voltage photoelectric sensors with isolated solid-state output
- Advanced one-piece photoelectric sensors with outstanding optical performance and extremely rugged design Universal supply voltage: 12 V dc to 250 V dc or 24 V ac to 250 V ac
- Opto-isolated solid-state relay output; 300 mA max. load at up to 250 V ac, 250 V dc
- Full line includes opposed, diffuse, retroreflective, convergent, and glass and plastic fiber optic sensing modes Selectable light/dark operate
- Versatile plug-in modules available for output timing logic and/or signal strength display Highly visible Power, Signal (AID™ System1), and Output indicator LEDs Choice of prewired 2 m (6.5 ft) or 9 m (30 ft) unterminated cable or Mini-style quick- disconnect fitting
- Versatile mounting options
- Designed to withstand 1200 psi washdown; exceeds its NEMA 6P and IEC IP67 rating WARNING: Not To Be Used for Personnel Protection Never use this device as a sensing device for personnel protection. Doing so could lead to serious injury or death. This device does not include the self-checking redundant circuitry necessary to allow its use in personnel safety applications. A sensor failure or malfunction can cause either an energized or de-energized sensor output condition. Models To order the 9 m (30 ft) cable models, add the suffix "W/30" to the cabled model number. For example: Q453E W/30. Models with a quick disconnect (QD) connector require a mating cable. Opposed Mode Emitter (E) and Receiver (R) Models Because of their extremely high excess gain, these opposed-mode sensors are an excellent option for sensing in contaminated or dirty areas, and are also the best choice for long-range sensing. OPPOSED Infrared, 880 nm Models Range Cable Supply Voltage Output Type Q453E Emitter 60 m (200 ft) 2-wire 2 m (6.5 ft) Universal 12 to 250 V dc or 24 to 250 V ac Isolated SPST Solid-state Switch Q45BW13R Receiver 4-wire 2 m (6.5 ft) Q453EQ Emitter 3-pin Mini QD Q45BW13RQ Receiver 4-pin Mini QD Retroreflective Mode Models The visible red sensing beam of these sensors makes them very easy to align. Model Q45BW13LP polarizes the emitted light and filters out unwanted reflections, making sensing possible in applications otherwise considered unsuited to retroreflective sensing. Performance is specified using the model BRT-3 3-inch reflector (go to www.bannerengineering.com for more information). RETRO Visible red, 680 nm (non-polarized) P POLAR RETRO Visible red, 680 nm (polarized) Retroreflective range is specified using one model BRT-3 retroreflector (3-inch diameter). Actual sensing range may be more or less than specified, depending upon the efficiency and reflective area of the retroreflector used. 1 U.S. Patent number 4356393 Q45BW13 Series Sensors Original Document 53999 Rev. D
31 January 2017
Models Range Cable Supply Voltage Output Type Q45BW13LV 0.08 to 9 m (3 in to 30 ft) 4-wire 2 m (6.5 ft) Universal 12 to 250 V dc or 24 to 250V ac Isolated SPST Solid-state SwitchQ45BW13LVQ 4-Pin Mini QD Polarized Models Range Cable Supply Voltage Output Type Q45BW13LP 0.15 to 6 m (6 in to 20 ft) 4-wire 2 m (6.5 ft) Universal 12 to 250 V dc or 24 to 250 V ac Isolated SPST Solid-state SwitchQ45BW13LPQ 4-Pin Mini QD Diffuse Mode Models These diffuse-mode models detect objects by sensing the reflection of their own emitted light. Ideal for use when the reflectivity and profile of the object to be sensed are sufficient to return a large percentage of emitted light back to the sensor. Model Q45BW13DX is the first choice for diffuse-mode applications when there are no background objects to falsely return light. DIFFUSE Infrared, 880 nm Short Range Models Range Cable Supply Voltage Output Type Q45BW13D 450 mm (18 in) 4-wire 2 m (6.5 ft) Universal 12 to 250 V dc or 24 to 250 V ac Isolated SPST Solid-state SwitchQ45BW13DQ 4-Pin Mini QD Long Range Models Range Cable Supply Voltage Output Type Q45BW13DL 1. 8 m (6 ft) 4-wire 2 m (6.5 ft) Universal 12 to 250 V dc or 24 to 250 V ac Isolated SPST Solid-state SwitchQ45BW13DLQ 4-Pin Mini QD High Power Models Range Cable Supply Voltage Output Type Q45BW13DX 3 m (10 ft) 4-wire 2 m (6.5 ft) Universal 12 to 250 V dc or 24 to 250 V ac Isolated SPST Solid-state SwitchQ45BW13DXQ 4-Pin Mini QD Convergent Mode Models These sensors are ideal for reflective sensing of very small parts or profiles, and can accurately sense the position of parts approaching from the side. Will ignore all but highly reflective objects that are outside the sensing range. CONVERGENT VISIBLE RED Visible red, 680 nm Models Focus Cable Supply Voltage Output Type Q45BW13CV 38 mm (1.5 in) Spot Size at Focus: 1.3 mm (0.05 in) 4-wire 2 m (6.5 ft) Universal 12 to 250 V dc or 24 to 250 V ac Isolated SPST Solid-state SwitchQ45BW13CVQ 4-pin Mini QD Q45BW13 Series Sensors 2 www.bannerengineering.com - Tel: +1-763-544-3164 P/N 53999 Rev. D
Models Focus Cable Supply Voltage Output Type Q45BW13CV4 100 mm (4 in) Spot Size at Focus: 1.5 mm (0.06 in) 4-wire 2 m (6.5 ft) Universal 12 to 250 V dc or 24 to 250 V ac Isolated SPST Solid-state SwitchQ45BW13CV4Q 4-pin Mini QD Glass Fiber-Optic Models These models are an excellent choice for glass fiber optic applications where faster sensor response is not important. Their high excess gain means that opposed individual fibers can operate reliably in many very hostile environments. Also, special miniature bifurcated fiber optic assemblies with bundle sizes as small as .5 mm (.020 in) dia. may be used successfully for diffuse-mode sensing when using sensor model Q45BW13F(Q). For more information on compatible glass fiber optics, go to www.bannerengineering.com. GLASS FIBER Infrared, 880 nm and Visible red, 650 nm Infrared, 880 nm Models Range Cable Supply Voltage Output Type Q45BW13F Range varies by sensing mode and fiber optics used 4-wire 2 m (6.5 ft) Universal 12 to 250 V dc or 24 to 250V ac Isolated SPST Solid-state SwitchQ45BW13FQ 4-Pin Mini QD Visible red, 650 nm Models Range Cable Supply Voltage Output Type Q45BW13FV Range varies by sensing mode and fiber optics used 4-wire 2 m (6.5 ft) Universal 12 to 250 V dc or 24 to 250 V ac Isolated SPST Solid-state SwitchQ45BW13FVQ 4-Pin Mini QD Plastic Fiber-Optic Models Lower in cost than glass fiber optics, plastic fiber optics are ideal for use in situations where environmental conditions allow (for example, low levels of acids, alkalis, and solvents). Most are easily cut to length in the field, and are available in a variety of sensing end styles. For more information on compatible plastic fiber optics, go to www.bannerengineering.com. GLASS FIBER Visible red, 660 nm Models Range Cable Supply Voltage Output Type Q45BW13FP Range varies by sensing mode and fiber optics used 4-wire 2 m (6.5 ft) Universal 12 to 250 V dc or 24 to 250V ac Isolated SPST Solid-state SwitchQ45BW13FPQ 4-Pin Mini QD Overview Status indicator LEDs for power, signal, and output are clearly visible beneath a raised dome in the sensor’s transparent o-ring-sealed polycarbonate cover. Also located beneath the sensor’s o-ring-sealed cover are controls for light/dark operate selection and the sensitivity adjustment. The power indicator (green) lights when power is applied to the sensor.
- The signal indicator (red) lights when the sensor sees its modulated light source and pulses at a rate proportional to the strength of the received light signal; this is the AID™ Alignment Indicating Device2. The output indicator (amber) lights when the sensor’s output is conducting. This indicator is especially useful when a timing logic module is used and signal and output conditions are not concurrent. 2 US patent no. 4356393 Q45BW13 Series Sensors P/N 53999 Rev. D www.bannerengineering.com - Tel: +1-763-544-3164 3
- LEDs Green LED: Power on indicator
- Red LED: Signal indicator
- Amber LED: Output status indicator 2. Optional LED signal strength display 3. Optional timing adjustment 4. Optional timing adjustment Light/dark operate switch Wiring Diagrams Sensors with Attached Cable and Sensors with Quick-Disconnect 4-Pin Mini (model suffix Q) 24-250V ac or 12-250V dc* *NOTE: Connection of dc power is without regard to polarity. Isolated Solid-state SPST Switch Quick disconnect (QD) wiring diagrams are functionally identical. Emitters with Attached Cable brown blue 24–250 V ac or 12–250 V dc* *Connection of dc power is without regard to polarity. Emitters with Quick-Disconnect 3-Pin Mini brown black blue 24–250 V ac or 12–250 V dc* Q45BW13 Series Sensors 4 www.bannerengineering.com - Tel: +1-763-544-3164 P/N 53999 Rev. D
Supply Voltage and Current Universal voltage: 24 to 250 V ac, 50/60 Hz or 12 to 250 V dc (1.5 watts maximum) Supply Protection Circuitry Protected against transient voltages DC wiring is without regard to polarity Output Configuration All models except emitters: Optically isolated SPST solid-state switch Output Rating
250 V ac, 250 V dc, 300 mA
Output saturation voltage: 3 V at 300 mA, 2 V at 15 mA Off-state leakage current: <50 microamps Inrush current: 1 amp for 20 milliseconds, non-repetitive Output Protection Circuitry Protected against false pulse on power-up Output Response Time Opposed mode: 2 milliseconds on, 1 millisecond off All other sensing modes: 2 milliseconds on/off Note: 100 millisecond delay on power-up. Output is non-conducting during this time. Required Overcurrent Protection WARNING: Electrical connections must be made by qualified personnel in accordance with local and national electrical codes and regulations. Overcurrent protection is required to be provided by end product application per the supplied table. Overcurrent protection may be provided with external fusing or via Current Limiting, Class 2 Power Supply. Supply wiring leads < 24 AWG shall not be spliced. For additional product support, go to www.bannerengineering.com. Supply Wiring (AWG) Required Overcurrent Protection (Amps) 20 5.0 22 3.0 24 2.0 26 1.0 28 0.8 30 0.5 Repeatability Opposed mode: 0.25 milliseconds All other sensing modes: 0.5 milliseconds Response time and repeatability specifications are independent of signal strength. Adjustments Light/Dark Operate select switch; and multi-turn Sensitivity control on top of sensor beneath a transparent o-ring-sealed Lexan® cover, allows precise sensitivity setting (turn clockwise to increase gain). Optional logic and logic/ display modules have adjustable timing functions Indicators Indicator LEDs are clearly visible beneath a raised transparent Lexan® dome on top of the sensor. Power (green) LED lights whenever 24 to 250V ac, or 12 to 250V dc power is applied Signal (red) AID™ System LED lights whenever the sensor sees its modulated light source, and pulses at a rate proportional to the strength of the received light signal Load (amber) LED lights whenever the output relay is energized Optional 7-element LED signal strength display module Construction Molded reinforced thermoplastic polyester housing, o-ring-sealed transparent polycarbonate cover, molded acrylic lenses, and stainless steel hardware. Q45s are designed to withstand 1200 psi washdown. The base of cabled models has a 1/20-in NPS integral internal conduit thread. Environmental Rating NEMA 6P, IEC IP67 Connections 2 m (6.5 ft) unterminated PVC-jacketed cable or 9 m (30 ft) unterminated PVC- jacketed cable, or Mini quick-disconnect (QD) fittings are available (“Q”- suffix models). QD cables are ordered separately. Operating Conditions 90% at +50 °C maximum relative humidity (non-condensing) Application Notes Optional output timing modules are available. See page 10 for more information. Output is not short-circuit protected. Exercise care when making wiring connections. Certifications Q45BW13 Series Sensors P/N 53999 Rev. D www.bannerengineering.com - Tel: +1-763-544-3164 5
Opposed, Retro, and Diffuse Sensing Modes (Model Suffix E, R, D, DL, DX, LP, and LV) Cabled Models Quick-Disconnect Models 54.1 mm (2.13") 44.5 mm (1.75") 69.0 mm (2.72") 87.6 mm (3.45") Internal Thread (1/2–14NPSM) 30.0 mm (1.18") ø 6.1 (0.24") 2m (6.5') Cable 7.1 mm (0.28") 4.5 mm (#10) Screw Clearance (2) 50.8 mm (2.00") 6.4 mm (0.25") Lens Centerline External thread (M30 x 1.5) hex nut supplied External Thread M30 X 1.5 Mini-style QD Connector 14 mm (0.6") Convergent Sensor Models (CV and CV4) Glass Fiber Optic Models (F and FV) Plastic Fiber Optic Models (FP) 61.7 mm (2.43") 60.5 mm (2.38") 59.9 mm (2.36") Q45BW13 Series Sensors 6 www.bannerengineering.com - Tel: +1-763-544-3164 P/N 53999 Rev. D
Model Length Style Dimensions Pinout (Female) MBCC-306 1.83 m (6.5 ft) Straight 7/8-16UN-2B ø 25.5 52 Typ. 1 = Black 2 = Brown 3 = Blue MBCC-312 3.66 m (12 ft) MBCC-330 9.14 m (30 ft) 4-Pin Mini-Style Cordsets Model Length Style Dimensions Pinout (Female) MBCC-406 1.83 m (6 ft) Straight 7/8-16UN-2B ø 25.5 52 Typ. 1 = Brown 2 = White 3 = Blue 4 = Black MBCC-412 3.66 m (12 ft) MBCC-430 9.14 m (30 ft) Retroreflective Targets Banner offers a wide selection of high-quality retroreflective targets. See www.bannerengineering.com for complete information. Note: Polarized sensors require corner cube type retroreflective targets. Non-polarized sensors may use any retroreflective target. Brackets SMB30C 30 mm split clamp, black PBT bracket
- Stainless steel mounting hardware included
- Mounting hole for 30 mm sensor A B Hole center spacing: A=ø 45 Hole size: B=ø 27.2 SMB30MM 12-ga. stainless steel bracket with curved mounting slots for versatile orientation
- Clearance for M6 (¼ in) hardware
- Mounting hole for 30 mm sensor A B C Hole center spacing: A = 51, A to B = 25.4 Hole size: A = 42.6 x 7, B = ø 6.4, C = ø 30.1 Q45BW13 Series Sensors P/N 53999 Rev. D www.bannerengineering.com - Tel: +1-763-544-3164 7
Black reinforced thermoplastic polyester Stainless steel mounting and swivel locking hardware included B A Hole center spacing: A=ø 50.8 Hole size: A=ø 7.0, B=ø 30.0 Output Timing Logic and Signal Strength Display Modules Q45 sensors easily accept the addition of output timing logic and signal strength display functions. Display modules have a seven- element display that gives a more precise indication of excess gain than does the AID™ system LED that is standard on Q45 sensors. The modules listed below may be used with all Q45BW13 sensors. Refer to the module's datasheet for more information. Models Logic and/or Display Function 45LM58 Programmable output timing logic 45LM58D Programmable output timing logic plus signal strength display 45LMD Signal strength display only (no timing function) Banner Engineering Corp. Limited Warranty Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product. THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE. This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE. Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously manufactured by Banner Engineering Corp. Any misuse, abuse, or improper application or installation of this product or use of the product for personal protection applications when the product is identified as not intended for such purposes will void the product warranty. Any modifications to this product without prior express approval by Banner Engineering Corp will void the product warranties. All specifications published in this document are subject to change; Banner reserves the right to modify product specifications or update documentation at any time. Specifications and product information in English supersede that which is provided in any other language. For the most recent version of any documentation, refer to: www.bannerengineering.com. Q45BW13 Series Sensors © Banner Engineering Corp. All rights reserved