Q45VR3 BANNER | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 11

Technical content

Universal Voltage Photoelectric Sensors with Electromechanical Relay Output

  • Advanced one-piece photoelectric sensors with outstanding optical performance and extremely rugged design Universal supply voltage: 12 to 250 V dc or 24 to 250 V ac
  • Electromechanical relay for economical, high-capacity switching and immunity to electrical noise
  • Multiple sensing modes available: opposed, diffuse, retroreflective, and convergent, plus glass and plastic fiber optic models Selectable light/dark operate
  • Versatile plug-in modules available for output timing logic and/or signal strength display Highly visible Power, Signal (AID™ System 1), and Output indicator LEDs Choice of prewired 2 m (6.5 ft) or 9 m (30 ft) unterminated cable or Mini-style quick- disconnect fitting
  • Versatile mounting options
  • Designed to withstand 1200 psi washdown; exceeds its NEMA 6P and IEC IP67 rating WARNING: Not To Be Used for Personnel Protection Never use this device as a sensing device for personnel protection. Doing so could lead to serious injury or death. This device does not include the self-checking redundant circuitry necessary to allow its use in personnel safety applications. A sensor failure or malfunction can cause either an energized or de-energized sensor output condition. Models To order the 9 m (30 ft) cable models, add the suffix "W/30" to the cabled model number. For example: Q453E W/30. Models with a quick disconnect (QD) connector require a mating cable. Opposed-Mode Emitter (E) and Receiver (R) Models Because of their extremely high excess gain, these opposed-mode sensors are an excellent option for sensing in contaminated or dirty areas, and are also the best choice for long-range sensing. OPPOSED Infrared, 880 nm Models Cable Range Supply Voltage Output Type Q453E Emitter 2-wire 2 m (6.5 ft) cable 60 m (200 ft) Universal 12 to 250 V dc or 24 to

250 V ac SPDT Electro-mechanical relay

Q45VR3R Receiver 5-wire 2 m (6.5 ft) cable Q453EQ Emitter 3-Pin Mini-style QD Q45VR3RQ Receiver 5-Pin Mini-style QD Retroreflective-Mode Models The visible red sensing beam of these sensors makes them very easy to align. Model Q45VR3LP polarizes the emitted light and filters out unwanted reflections, making sensing possible in applications otherwise considered unsuited to retroreflective sensing. Specified using the model BRT-3 3-inch reflector (go to www.bannerengineering.com for additional information). RETRO Visible red, 680 nm (non-polarized) P POLAR RETRO Visible red, 680 nm (polarized) 1 U.S. Patent no. 4356393 Q45VR3 Series Sensors Original Document 53997 Rev. D

30 January 2017

Models Range Cable Supply Voltage Output Type Q45VR3LV 0.08 to 9 m (3 in to 30 ft) 5-wire 2 m (6.5 ft) cable Universal 12 to 250 V dc or 24 to 250 V ac SPDT Electro-mechanical relayQ45VR3LVQ 5-Pin Mini-style QD Polarized Models Range Cable Supply Voltage Output Type Q45VR3LP 0.15 to 6 m (6 in to 20 ft) 5-wire 2 m (6.5 ft) cable Universal 12 to 250 V dc or 24 to 250 V ac SPDT Electro-mechanical relayQ45VR3LPQ 5-Pin Mini-style QD Diffuse-Mode Models These diffuse-mode models detect objects by sensing the reflection of their own emitted light. Ideal for use when the reflectivity and profile of the object to be sensed are sufficient to return a large percentage of emitted light back to the sensor. Model Q45VR3DX is the first choice for diffuse-mode applications when there are no background objects to falsely return light. DIFFUSE Infrared, 880 nm Short Range Models Range Cable Supply Voltage Output Type Q45VR3D 45 cm (18 inches) 5-wire 2 m (6.5 ft) cable Universal 12 to 250 V dc or 24 to 250 V ac SPDT Electro-mechanical relayQ45VR3DQ 5-Pin Mini-style QD Long Range Models Range Cable Supply Voltage Output Type Q45VR3DL 1.8 m (6 ft) 5-wire 2 m (6.5 ft) cable Universal 12 to 250 V dc or 24 to 250 V ac SPDT Electro-mechanical relay Q45VR3DLQ 5-Pin Mini-style QD High Power Models Range Cable Supply Voltage Output Type Q45VR3DX 3 m (10 ft) 5-wire 2 m (6.5 ft) cable Universal 12 to 250 V dc or 24 to 250 V ac SPDT Electro-mechanical relayQ45VR3DXQ 5-Pin Mini-style QD Convergent-Mode Models These sensors are ideal for reflective sensing of very small parts or profiles, and can accurately sense the position of parts approaching from the side. Ignores all but highly reflective objects that are outside the sensing range. CONVERGENT Visible red, 680 nm Models Focus Cable Supply Voltage Output Type Q45VR3CV 38 mm (1.5 in) Spot Size at Focus: 1.3 mm (0.05 in) 5-wire 2 m (6.5 ft) cable Universal 12 to 250 V dc or 24 to 250 V ac SPDT Electro-mechanical relay Q45VR3CVQ 5-Pin Mini-style QD Q45VR3CV4 100 mm (4 in) Spot Size at Focus: 1.5 mm (0.06 in) 5-wire 2 m (6.5 ft) cable Universal 12 to 250 V dc or 24 to 250 V ac SPDT Electro-mechanical relay Q45VR3CV4Q 5-Pin Mini-style QD Q45VR3 Series Sensors 2 www.bannerengineering.com - Tel: +1-763-544-3164 P/N 53997 Rev. D

These models are an excellent choice for glass fiber optic applications where faster sensor response is not important. Their high excess gain means that opposed individual fibers can operate reliably in many very hostile environments. Also, special miniature bifurcated fiber optic assemblies with bundle sizes as small as 0.5 mm (.020 in) diameter may be used successfully for diffuse-mode sensing when using sensor model Q45VR3F(Q). For more information on compatible glass fiber optics, go to www.bannerengineering.com. GLASS FIBER Infrared, 880 nm and Visible red, 650 nm Infrared, 880 nm Models Range Cable Supply Voltage Output Type Q45VR3F Range varies by sensing mode and fiber optics used. 5-wire 2 m (6.5 ft) cable Universal 12 to 250 V dc or 24 to 250 V ac SPDT Electro-mechanical relayQ45VR3FQ 5-Pin Mini-style QD Visible Red, 650 nm Models Range Cable Supply Voltage Output Type Q45VR3FV Range varies by sensing mode and fiber optics used. 5-wire 2 m (6.5 ft) cable Universal 12 to 250 V dc or 24 to 250 V ac SPDT Electro-mechanical relayQ45VR3FVQ 5-Pin Mini-style QD Plastic Fiber Optic Models Lower in cost than glass fiber optics, plastic fiber optics are ideal for use in situations where environmental conditions allow (for example, low levels of acids, alkalis, and solvents). Most are easily cut to length in the field, and are available in a variety of sensing end styles. For more information on compatible plastic fiber optics, go to www.bannerengineering.com. PLASTIC FIBER Visible red, 660 nm Models Range Cable Supply Voltage Output Type Q45VR3FP Range varies by sensing mode and fiber optics used. 5-wire 2 m (6.5 ft) cable Universal 12 to 250 V dc or 24 to 250 V ac SPDT Electro-mechanical relayQ45VR3FPQ 5-Pin Mini-style QD Overview Status indicator LEDs for power, signal, and output are clearly visible beneath a raised dome in the sensor’s transparent o-ring-sealed polycarbonate cover. Also located beneath the sensor’s o-ring-sealed cover are controls for light/dark operate selection and the sensitivity adjustment. The power indicator (green) lights when power is applied to the sensor.

  • The signal indicator (red) lights when the sensor sees its modulated light source and pulses at a rate proportional to the strength of the received light signal; this is the AID™ Alignment Indicating Device2. The output indicator (amber) lights when the sensor’s output is conducting. This indicator is especially useful when a timing logic module is used and signal and output conditions are not concurrent. 1. Sensitivity adjustment LEDs
  • Green LED: Power on indicator
  • Red LED: Signal indicator
  • Amber LED: Output status indicator 3. Optional LED signal strength display 4. Optional timing adjustment 5. Optional timing adjustment Light/dark operate switch 2 US patent no. 4356393 Q45VR3 Series Sensors P/N 53997 Rev. D www.bannerengineering.com - Tel: +1-763-544-3164 3

Q45VR3 Sensors with Attached Cable blue yellow white NC C NO brown black 24–250 V ac or 12–250 V dc* Q45VR3 Sensors with Quick-Disconnect 5-Pin Mini-Style (model suffix NC C NO blue yellow white brown black 24–250 V ac or 12–250 V dc* Q453E Emitters with Attached Cable brown blue 24–250 V ac or 12–250 V dc* *Connection of dc power is without regard to polarity. Q453EQ Emitters with Quick-Disconnect 3-Pin Mini-Style brown black blue 24–250 V ac or 12–250 V dc* Q45VR3 Series Sensors 4 www.bannerengineering.com - Tel: +1-763-544-3164 P/N 53997 Rev. D

Supply Voltage and Current Universal voltage: 24 to 250 V ac, 50/60 Hz or 12 to 250 V dc (1.5 watts maximum) Supply Protection Circuitry Protected against transient voltages DC hookup is without regard to polarity. Output Configuration SPDT (Single-Pole, Double-Throw) electromechanical relay output. All models except emitters. Output Rating Max. switching power (resistive load): 1250 VA, 150 W Max. switching voltage (resistive load): 250 V ac, 125 V dc Max. switching current (resistive load): 5 A @ 250 V ac, 5A @ 30 V dc derated to 200 mA @ 125 V dc Min. voltage and current: 5 V dc, 10 mA Mechanical life of relay: 50,000,000 operations Electrical life of relay at full resistive load: 100,000 operations Output Protection Circuitry Protected against false pulse on power-up Output Response Time 15 milliseconds ON and OFF Note: 100 millisecond delay on power-up. Relay is de-energized during this time. Required Overcurrent Protection WARNING: Electrical connections must be made by qualified personnel in accordance with local and national electrical codes and regulations. Overcurrent protection is required to be provided by end product application per the supplied table. Overcurrent protection may be provided with external fusing or via Current Limiting, Class 2 Power Supply. Supply wiring leads < 24 AWG shall not be spliced. For additional product support, go to www.bannerengineering.com. Supply Wiring (AWG) Required Overcurrent Protection (Amps) 20 5.0 22 3.0 24 2.0 26 1.0 28 0.8 30 0.5 Repeatability Opposed mode: 0.25 milliseconds All other sensing modes: 0.5 milliseconds Response time and repeatability specifications are independent of signal strength Adjustments Light/Dark Operate select switch; and multi-turn Sensitivity control on top of sensor beneath a transparent o-ring-sealed cover, allows precise sensitivity setting (turn clockwise to increase gain). Optional logic and logic/display modules have adjustable timing functions. Indicators Indicator LEDs are clearly visible beneath a raised transparent Lexan® dome on top of the sensor. Power (green) LED lights whenever 24 to 250 V ac, or 12 to 250 V dc power is applied Signal (red) AID™ System LED lights whenever the sensor sees its modulated light source, and pulses at a rate proportional to the strength of the received light signal Load (amber) LED lights whenever the output relay is energized Optional 7-element LED signal strength display module Construction Molded reinforced thermoplastic polyester housing, o-ring-sealed transparent Lexan® 3 cover, molded acrylic lenses, and stainless steel hardware. Q45s are designed to withstand 1200 psi washdown. The base of cabled models has a 1/2-inch NPS integral internal conduit thread. Environmental Rating NEMA 6P, IEC IP67 Connections PVC-jacketed 2 m (6.5 ft) or 9 m (30 ft) unterminated cables, or Mini-style quick-disconnect (QD) fittings are available (“Q”- suffix models). QD cables are ordered separately. Operating Conditions Temperature: –25 °C to +55 °C (− 13 °F to +131 °F) 90% at +50 °C maximum relative humidity (non-condensing) Application Notes Transient suppression is recommended for contacts switching inductive loads. Optional output timing modules are available. See Output Timing Logic and Signal Strength Display Modules on page 10 for more information. Certifications 3 Lexan® is a registered trademark of General Electric Co. Q45VR3 Series Sensors P/N 53997 Rev. D www.bannerengineering.com - Tel: +1-763-544-3164 5

Opposed, Retro, and Diffuse Sensing Modes (Model Suffix E, R, D, DL, DX, LP, and LV) Cabled Models Quick-Disconnect Models 54.1 mm (2.13") 44.5 mm (1.75") 69.0 mm (2.72") 87.6 mm (3.45") Internal Thread (1/2–14NPSM) 30.0 mm (1.18") ø 6.1 (0.24") 2m (6.5') Cable 7.1 mm (0.28") 4.5 mm (#10) Screw Clearance (2) 50.8 mm (2.00") 6.4 mm (0.25") Lens Centerline External thread (M30 x 1.5) hex nut supplied External Thread M30 X 1.5 Mini-style QD Connector 14 mm (0.6") Convergent Sensor Models (CV and CV4) Glass Fiber Optic Models (F and FV) Plastic Fiber Optic Models (FP) 61.7 mm (2.43") 60.5 mm (2.38") 59.9 mm (2.36") Q45VR3 Series Sensors 6 www.bannerengineering.com - Tel: +1-763-544-3164 P/N 53997 Rev. D

1.0 m 3.3 ft 10 m ft 100 m 330 ft 0.1 m 0.33 ft E X C E S S G A I N DIST ANCE 1000 Q45E/R Opposed Mode Effective Beam: 13 mm 48 m 160 ft 60 m 200 ft 36 m 120 ft 24 m ft 12 m 40 ft 0.5 m 1.0 m 1.5 m 0.5 m 1.0 m 1.5 m 20 in 40 in 60 in 20 in 40 in 60 in DISTANCE Q45E/R Opposed Mode Retroreflective Non-Polarized Retroreflective Polarized Excess Gain Beam Pattern Excess Gain Beam Pattern 100 1000 .10 m .33 ft 1.0 m 3.3 ft 10 m ft .01 m .033 ft E X C E S S G A I N DISTANCE Q45LV Retroreflective Mode With BRT-3 Reflector 12 m 40 ft 15 m 50 ft 9 m 30 ft 6 m ft 3 m ft 25 mm 50 mm 75 mm 25 mm 50 mm 75 mm 1.0 in 2.0 in 3.0 in 1.0 in 2.0 in 3.0 in DISTANCE Q45LV Retroreflective Mode With BRT-3 Reflector 100 1000 .10 m .33 ft 1.0 m 3.3 ft 10 m ft .01 m .033 ft E X C E S S G A I N DISTANCE Q45LP Retroreflective Mode With BRT-3 Reflector 6 m 20 ft 7.5 m 25 ft 4.5 m 15 ft 3 m 10 ft 1.5 m 5 ft 25 mm 50 mm 75 mm 25 mm 50 mm 75 mm 1.0 in 2.0 in 3.0 in 1.0 in 2.0 in 3.0 in DISTANCE Q45LP Retroreflective Mode With BRT-3 Reflector Diffuse-mode performance curves are based on a 90% reflectance white test card. Diffuse Short Range Diffuse Long Range Excess Gain Beam Pattern Excess Gain Beam Pattern 100 10 mm 0.4 in 100 mm 4.0 in 1000 mm 40 in 1.0 mm 0.04 in 1000 E X C E S S G A I N DISTANCE Q45D Diffuse Mode 500 mm 20.0 in 400 mm 16.0 in 300 mm 12.0 in 200mm 8.0 in 100 mm 4.0 in 5 mm 10 mm 15 mm 5 mm 10 mm 15 mm 0.2 in 0.4 in 0.6 in 0.2 in 0.4 in 0.6 in DISTANCE Q45D Diffuse Mode 100 1000 .10 m .33 ft 1.0 m 3.3 ft 10 m ft .01 m .033 ft E X C E S S G A I N DISTANCE Q45DL Diffuse Mode 2.4 m 8 ft 3.0 m 10 ft 1.8 m 6 ft 1.2 m 4 ft 0.6 m 2 ft 25 mm 50 mm 75 mm 25 mm 50 mm 75 mm 1.0 in 2.0 in 3.0 in 1.0 in 2.0 in 3.0 in DISTANCE Q45DL Diffuse Mode Q45VR3 Series Sensors P/N 53997 Rev. D www.bannerengineering.com - Tel: +1-763-544-3164 7

0.1 m 0.33 ft 1.0 m 3.3 ft 10 m ft 0.01 m 0.033 ft 1000 E X C E S S G A I N DISTANCE Q45DX Diffuse Mode 3.0 m 10 ft 2.4 m 8 ft 1.8 m 6 ft 1.2 m 4 ft 0.6 m 2 ft 25 mm 50 mm 75 mm 25 mm 50 mm 75 mm 1.0 in 2.0 in 3.0 in 1.0 in 2.0 in 3.0 in DISTANCE Diffuse Mode Q45DX Convergent mode performance curves are based on a 90% reflectance white test card. Convergent (CV and CVQ Models) Convergent (CV4 and CV4Q Models) Excess Gain Beam Pattern Excess Gain Beam Pattern 100 10 mm .4 in 100 mm 4 in 1000 mm 40 in 1 mm .04 in 1000 E X C E S S G A I N DISTANCE Q45CV Convergent Mode 190 mm 7.5 in 150 mm 6.0 in 113 mm 4.5 in 75 mm 3.0 in 38 mm 1.5 in 1.2 mm 2.5 mm 3.8 mm 1.2 mm 2.5 mm 3.8 mm 0.05 in 0.10 in 0.15 in 0.05 in 0.10 in 0.15 in DISTANCE Q45CV Convergent Mode 100 10 mm .4 in 100 mm 4 in 1000 mm 40 in 1 mm .04 in 1000 E X C E S S G A I N DISTANCE Q45CV4 Convergent Mode 190 mm 7.5 in 150 mm 6.0 in 113 mm 4.5 in 75 mm 3.0 in 38 mm 1.5 in 1.2 mm 2.5 mm 3.8 mm 1.2 mm 2.5 mm 3.8 mm 0.05 in 0.10 in 0.15 in 0.05 in 0.10 in 0.15 in DISTANCE Q45CV4 Convergent Mode Glass fiber optic Diffuse mode performance curves are based on a 90% reflectance white test card. Glass Fiber Optic, Infrared (Opposed Mode) Glass Fiber Optic, Infrared (Diffuse Mode) Excess Gain Beam Pattern Excess Gain Beam Pattern 100 0.1 m 0.33 ft 1.0 m 3.3 ft 10 m ft 0.01 m 0.03 ft 1000 E X C E S S G A I N DISTANCE Q45F Opposed Mode IT23S Fibers IT13S Fibers 2.0 m 75 in 1.6 m 60 in 1.2 m 45 in 0.8 m 30 in 0.4 m 15 in 50 mm 100 mm 150 mm 50 mm 100 mm 150 mm 2.0 in 4.0 in 6.0 in 2.0 in 4.0 in 6.0 in DISTANCE Q45F Opposed Mode IT23S Fibers IT13S Fibers 100 10 mm 0.4 in 100 mm 4.0 in 1000 mm 40 in 1 mm 0.04 in 1000 E X C E S S G A I N DISTANCE Q45F Diffuse Mode BT23S Fiber BT13S Fiber 125 mm 5 in 100 mm 4 in 75 mm 3 in 50 mm 2 in 25 mm 1 in 1.3 mm 2.5 mm 3.8 mm 1.3 mm 2.5 mm 3.8 mm 0.05 in 0.10 in 0.15 in 0.05 in 0.10 in 0.15 in DISTANCE Q45F Diffuse Mode BT23S Fiber BT13S Fiber Q45VR3 Series Sensors 8 www.bannerengineering.com - Tel: +1-763-544-3164 P/N 53997 Rev. D

Glass Fiber Optic, Visible Red (Opposed Mode) Glass Fiber Optic, Visible Red (Diffuse Mode) Excess Gain Beam Pattern Excess Gain Beam Pattern 100 10 mm 0.4 in 100 mm 4 in 1000 mm 40 in 1.0 mm 0.04 in 1000 E X C E S S G A I N DISTANCE Q45FV Opposed Mode IT23S Fibers IT13S Fibers 300 mm 12 in 250 mm 10 in 200 mm 8 in 150 mm 6 in 100 mm 4 in 10 mm 20 mm 30 mm 10 mm 20 mm 30 mm 0.4 in 0.8 in 1.2 in 0.4 in 0.8 in 1.2 in DISTANCE Q45FV Opposed Mode IT23S Fibers IT13S Fibers 100 10 mm 0.4 in 100 mm 4.0 in 1000 mm 40 in 1 mm 0.04 in 1000 E X C E S S G A I N DISTANCE Q45FV Diffuse Mode BT23S Fiber BT13S Fiber 25 mm 1.0 in 20 mm 0.8 in 15 mm 0.6 in 10 mm 0.4 in 5 mm 0.2 in 1.0 mm 2.0 mm 3.0 mm 1.0 mm 2.0 mm 3.0 mm 0.04 in 0.08 in 0.12 in 0.04 in 0.08 in 0.12 in DISTANCE Q45FV Diffuse Mode BT23S Fiber BT13S Fiber Plastic fiber optic Diffuse mode performance curves are based on a 90% reflectance white test card. Plastic Fiber Optic (Opposed Mode) Plastic Fiber Optic (Diffuse Mode) Excess Gain Beam Pattern Excess Gain Beam Pattern 100 10 mm 0.4 in 100 mm 4.0 in 1000 mm 40 in 1 mm 0.04 in 1000 E X C E S S G A I N DISTANCE Q45FP Opposed Mode PIT46U Fibers PIT26U Fibers 125 mm 5.0 in 100 mm 4.0 in 75 mm 3.0 in 50 mm 2.0 in 25 mm 1.0 in 15 mm 30 mm 45 mm 15 mm 30 mm 45 mm 0.6 in 1.2 in 1.8 in 0.6 in 1.2 in 1.8 in DISTANCE Q45FP Opposed Mode PIT46U Fibers PIT26U Fibers 100 1 mm 0.04 in 10 mm 0.4 in 100 mm 4 in 0.1 mm 0.004 in 1000 E X C E S S G A I N DISTANCE Q45FP Diffuse Mode PBT46U Fiber PBT26U Fiber 50 mm 2.0 in 40 mm 1.6 in 30 mm 1.2 in 20 mm 0.8 in 10 mm 0.4 in 6 mm 12 mm 18 mm 6 mm 12 mm 18 mm 0.25 in 0.50 in 0.75 in 0.25 in 0.50 in 0.75 in DISTANCE Q45FP Diffuse Mode PBT46U Fiber Accessories Cordsets 3-Pin Mini-Style Cordsets Model Length Style Dimensions Pinout (Female) MBCC-306 1.83 m (6.5 ft) Straight 7/8-16UN-2B ø 25.5 52 Typ. 1 = Black 2 = Brown 3 = Blue MBCC-312 3.66 m (12 ft) MBCC-330 9.14 m (30 ft) 5-Pin Mini-Style Cordsets Model Length Style Dimensions Pinout (Female) MBCC-506 1.83 m (6 ft) Straight 7/8-16UN-2B ø 25.5 52 Typ. 1 = Black 2 = Blue 3 = Yellow 4 = Brown 5 = White MBCC-512 3.66 m (12 ft) MBCC-530 9.14 m (30 ft) Q45VR3 Series Sensors P/N 53997 Rev. D www.bannerengineering.com - Tel: +1-763-544-3164 9

Banner offers a wide selection of high-quality retroreflective targets. See www.bannerengineering.com for complete information. Note: Polarized sensors require corner cube type retroreflective targets. Non-polarized sensors may use any retroreflective target. Brackets SMB30C 30 mm split clamp, black PBT bracket

  • Stainless steel mounting hardware included
  • Mounting hole for 30 mm sensor A B Hole center spacing: A=ø 45 Hole size: B=ø 27.2 SMB30MM 12-ga. stainless steel bracket with curved mounting slots for versatile orientation
  • Clearance for M6 (¼ in) hardware
  • Mounting hole for 30 mm sensor A B C Hole center spacing: A = 51, A to B = 25.4 Hole size: A = 42.6 x 7, B = ø 6.4, C = ø 30.1 SMB30SC Swivel bracket with 30 mm mounting hole for sensor Black reinforced thermoplastic polyester Stainless steel mounting and swivel locking hardware included B A Hole center spacing: A=ø 50.8 Hole size: A=ø 7.0, B=ø 30.0 Output Timing Logic and Signal Strength Display Modules Q45 sensors easily accept the addition of output timing logic and signal strength display functions. Display modules have a seven- element display that gives a more precise indication of excess gain than does the AID™ system LED that is standard on Q45 sensors. The modules listed below may be used with all Q45VR3 sensors. Refer to the module's datasheet for more information. Models Logic and/or Display Function 45LM58 Programmable output timing logic 45LM58D Programmable output timing logic plus signal strength display 45LMD Signal strength display only (no timing function) Q45VR3 Series Sensors 10 www.bannerengineering.com - Tel: +1-763-544-3164 P/N 53997 Rev. D

Banner Engineering Corp. Limited Warranty Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product. THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE. This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE. Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously manufactured by Banner Engineering Corp. Any misuse, abuse, or improper application or installation of this product or use of the product for personal protection applications when the product is identified as not intended for such purposes will void the product warranty. Any modifications to this product without prior express approval by Banner Engineering Corp will void the product warranties. All specifications published in this document are subject to change; Banner reserves the right to modify product specifications or update documentation at any time. Specifications and product information in English supersede that which is provided in any other language. For the most recent version of any documentation, refer to: www.bannerengineering.com. Q45VR3 Series Sensors © Banner Engineering Corp. All rights reserved