Q2XAPAF150-2M BANNER | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 8

Technical content

Miniature sensors featuring extended range and background suppression mode

  • Miniature sensor for installation in the smallest of spaces
  • Exceptional optical performance; up to 150 mm sensing range in miniature Q2X housing Background suppression models for reliable detection of objects when the background condition is not controlled or fixed
  • Simple multi-turn screw adjustment of cutoff distance
  • Enhanced immunity to fluorescent lights
  • Crosstalk immunity algorithm allows two sensors to be used in close proximity
  • Small visible red LED or Class 1 laser emitter spot WARNING:
  • Do not use this device for personnel protection
  • Using this device for personnel protection could result in serious injury or death. This device does not include the self-checking redundant circuitry necessary to allow its use in personnel safety applications. A device failure or malfunction can cause either an energized (on) or de- energized (off) output condition. Models Sensing Mode Models 1 Sensing Range Connection Output Type ADJUSTABLE-FIELD Adjustable Field, Visible red, 645 nm Q2XAPAF150-2M Adjustable Cutoff: 18 mm to 150 mm Minimum sensing range: < 1.6 mm depending on cutoff and target reflectivity 2 m (6.5 ft) unterminated 3-wire PVC-jacketed cable

1 PNP Light Operate (LO)

150 mm (6 in) PVC cable with a 4-pin M8 male quick disconnect Bipolar LO LASER ADJUSTABLE-FIELD CLASS 1 Adjustable Field, Visible red Class 1 laser, 680 nm Q2XAPLAF100-2M Adjustable Cutoff: 18 mm to 100 mm Minimum sensing range: < 1.6 mm depending on cutoff and target reflectivity 2 m (6.5 ft) unterminated 3-wire PVC-jacketed cable

1 PNP LO

150 mm (6 in) PVC cable with a 4-pin M8 male quick disconnect Bipolar LO 1 • To order Dark Operate (DO) models, replace "AP", "AN", or "AB" with "RP", "RN", or "RB", respectively. To order PNP or NPN models with a 150 mm (6 in) PVC cable and a 3-pin M8 male quick disconnect, replace "-2M" with "-Q3".

  • To order Bipolar models with a 150 mm (6 in) PVC cable and a 4-pin M12 male quick disconnect, replace "-Q" with "-Q5". Q2X Mechanically Adjustable Background Suppression with Visible Red LED or Class 1 Red Laser Original Document 217279 Rev. D

14 October 2021

Figure 4. Background Suppression Mode Application Example

10 V DC to 30 V DC (10% maximum ripple within specified limits) at less

2 LED indicators on sensor top:

M12 male quick disconnect, depending on model. Limiting, Class 2 Power Supply. Supply wiring leads < 24 AWG shall not be spliced.

4-Pin Threaded M8 Cordsets—Single Ended Model Length Style Dimensions Pinout (Female) PKG4M-2 2.04 m (6.68 ft) Straight ø 9.5 35 Typ. M8 x 1 3 1 1 = Brown 2 = White 3 = Blue 4 = Black PKG4M-5 5 m (16.4 ft) PKG4M-9 9.04 m (29.6 ft) PKW4M-2 2 m (6.56 ft) Right Angle ø 9.5 28 Typ. 20 Typ. M8 x 1 PKW4M-5 5 m (16.4 ft) PKW4M-9 9 m (29.5 ft) 4-Pin Threaded M12 Cordsets—Single Ended Model Length Style Dimensions Pinout (Female) MQDC-406 2 m (6.56 ft) Straight 44 Typ. ø 14.5 M12 x 1 1 = Brown 2 = White 3 = Blue 4 = Black MQDC-415 5 m (16.4 ft) MQDC-430 9 m (29.5 ft) MQDC-450 15 m (49.2 ft) MQDC-406RA 2 m (6.56 ft) Right-Angle 32 Typ. [1.26"] 30 Typ. [1.18"] ø 14.5 [0.57"] M12 x 1 2 3 MQDC-415RA 5 m (16.4 ft) MQDC-430RA 9 m (29.5 ft) MQDC-450RA 15 m (49.2 ft) Brackets All measurements are listed in millimeters, unless noted otherwise. SMBQ2XA

  • Vertical L-shaped bracket 20-ga stainless steel 2 x Ø3.3 2 x Ø3.3 SMBQ2XB
  • Rear L-shaped bracket 20-ga stainless steel 24 18 2 x Ø3.3 2 x Ø3.3 Q2X Mechanically Adjustable Background Suppression with Visible Red LED or Class 1 Red Laser P/N 217279 Rev. D www.bannerengineering.com - Tel: + 1 888 373 6767 7

Banner Engineering Corp. Limited Warranty Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product. THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE. This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE. Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously manufactured by Banner Engineering Corp. Any misuse, abuse, or improper application or installation of this product or use of the product for personal protection applications when the product is identified as not intended for such purposes will void the product warranty. Any modifications to this product without prior express approval by Banner Engineering Corp will void the product warranties. All specifications published in this document are subject to change; Banner reserves the right to modify product specifications or update documentation at any time. Specifications and product information in English supersede that which is provided in any other language. For the most recent version of any documentation, refer to: www.bannerengineering.com. For patent information, see www.bannerengineering.com/patents. Q2X Mechanically Adjustable Background Suppression with Visible Red LED or Class 1 Red Laser © Banner Engineering Corp. All rights reserved