Q22F7BXXG12E APEM | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 3
Technical content
www.apem.com Q-SERIES 22mmØ Panel Mounting LED Indicator Product Specification Intensity (Typical) at |op Standard Prominent Flush Forward Voltage (all voltages) (all voltages) HE Red 80mcd 70mcd 5.7V Green 95mcd 70mcd 5.9V Yellow 60mcd 60mcd 5.9V Blue 120mcd 100mcd 9.9V White 350mcd 200mcd 3.6V Bi-colour (Typical) (Red/Green) 80/50mcd 80/50mcd 2.0V/2.2V Tri-colour (Typical) (Red/Green/Yellow) 80/50/50mcd 80/50/50mcd 2.0V/2.2V/2.1V Bi-colour - The colour is changed by reversing the polarity of the supply voltage. Tri-colour - The indicator has red and green LEDs, when both connected yellow is produced. Super Bright Prominent Flush Forward Voltage (all voltages) (all voltages) HE Red 1,230mcd 885mcd 5.85V Green 1,060mcd 980mcd 9.0V Yellow 1,780mcd 1,250mcd 6.0V Luminous intensity will be reduced with lower operating current. Max Reverse Voltage: 5V Viewing Angle: 100° (dependant on model) Life Expectancy: 100,000 hours Operating Temperature Range: –40 to +85°C Note: The operating voltage must not be exceeded by more that 10% as this will result in reduced life expectancy. The company reserves the right to change specifications without notice. Distinctive Features and Specifications
- 22mm panel mounting LED indicator
- 18mm coloured diffused epoxy lens
- Bright chrome, black chrome and satin grey, plated brass bezel finish
- Bright chrome, satin grey, gold and black ABS plastic bezel finish
- Prominent and flush bezel styles
- 5.5VDC – 220VAC
- (2.8 x 0.8) terminals, pins or (200mm long) wire terminations
- IP67 sealing option (EN60529)
- Supplied with fixing nut and spring washer NB: UL Recognised Component Switch Voltage Operating Voltage Vop Operating Current |op (Min to Max) (Typical All Types) 5.5VDC (No Resistor) 5.0 to 6.0VDC 40mA 12VDC 10.8 to 13.2VDC 40mA 24VDC 21.6 to 26.4VDC 40mA 28VDC 25.2 to 30.8VDC 40mA 110VAC 99 to 121VAC 5mA 230VAC 207 to 253VAC 3mA PANEL CUTOUT Ø 22,00 ±0,1 TECHNICAL S PECIFICATIONS
www.apem.com Q-SERIES 22mmØ Panel Mounting LED Indicator Technical Drawings PROMINENT BEZEL Note: The company reserves the right to change specifications without notice. FLUSH BEZEL WIRES (Epoxy Filled) WIRES (Epoxy Filled) PINS (Epoxy Filled) PINS (Epoxy Filled) SOLDER LUG/FASTONS SOLDER LUG/FASTONS ±10 ±10
www.apem.com Q-SERIES 22mmØ Panel Mounting LED Indicator Ordering Overview STANDARD OPTIONS Q 22 F 1 BP XX W 28 E DL
- Gold Faston terminal denotes Anode (+), silver terminal denotes Cathode (-)
- Standard wire length is 200mm, 22AWG, red wire denotes Anode (+), black wire denotes Cathode (-) for other wire lengths consult APEM
- For LEDs with alternate voltages consult APEM
- Bi-colour LEDs, by connecting the gold Faston (+) one colour is produced, by reversing the supply voltage another colour is produced – Bi-colours are available up to 28VDC
- Take care when soldering to the Faston terminals
- Pin and Wire options are epoxy sealed at the rear of the bezels
- The Tri-colour LED has red and green LEDs when both are connected yellow is produced
- Standard Tri-colour Faston terminals are two Anodes (+) and one Cathode (-)
- Tri-colour wires are one red (+) and one green (+) Anode and one black (-) Cathode
- Tri-colour pins are centre (–) cathode, shortest (+) anode pin green, longest (+) anode pin red
- Maximum panel thickness: Prominent = 12mm, Flush = 10mm
- Plastic bezel material: ABS
- Daisy chaining option - has negative (Cathode) terminals linked (3 x Fastons), solder lugs only
- Lamp test facility option (4 x Faston), solder lugs only
- We recommend using Superbright LEDs for use at 220VAC
- For resistorless versions (05) please pay attention to the forward voltage
- For multi-voltage options please consult Apem Q Example Q22FP1BPXXW28EDL Ø22mm, flush bezel, solder lug terminals, black plastic finish, fixed light, white, 28volt DC LED, IP67 Panel Seal, Daisy Chain 1 = Solder Lugs/Fastons (2.8 x 0.8) 4 = Pins 5 = Wires Metal C = Bright Chrome B = Black Chrome G = Satin Grey Plastic CP = Bright Chrome BP = Black GP = Satin Grey AU = Gold R = Red G = Green Y = Yellow B = Blue W = White SR = Super Bright Red SG = Super Bright Green SY = Super Bright Yellow RG = Red/Green RY = Red/Yellow GY = Green/Yellow RYG = Red/Yellow/ Green 05 = 5VDC* 12 = 12VDC 12A = 12VAC/DC 24 = 24VDC 24A = 24VAC/DC 28 = 28VDC 28A = 28VAC/DC 110 = 110VAC 220 = 220VAC (Blank) = Unsealed E = IP67 DL = Daisy Chain LT = Lamp Test XX = Fixed Light KK = Flashing Light (only up to 12VDC) YY = Bi-colour ZZ = Tri-colour SERIES MOUNTING HOLE 22 = Ø22mm Metal P = Prominent F = Flush Plastic PP = Prominent FP = Flush BEZEL STYLE TERMINALS BEZEL FINISH TYPE OF ILLUMINATION LED COLOUR VOLTAGE SEALING OPTIONS The Q22 Series is available with a range of standard options, to specify your LED, simply choose one option from each column. An example is shown below. *Supplied without a resistor