Q22 ETC2 | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
www.magtechind.com Tel: 702‐364‐9998 Q22 Series Product Specifications ANZ#: Z220d, Sep. 19, 2014High Power LED Driver Total Power 25 Watts max. Input Voltages 110 ~ 277VAC Number of Outputs One SPECIAL FEATURES Universal Input range from 100VAC~304VAC, 50/60Hz Versatile mechanical design maximizes design flexibility. Form-factor: Available in metal and plastic Fully potted, suitable for dry and damp location applications 4 in 1 Dimming Control plus “ENABLE” input UL8750 and CE compliant Wide selection of pre-adjusted C/C outputs (factory setting) ENVIRONMENTAL Operating temperature: -40 to +50 ⁰ C, Tc: 85 ⁰ C Storage temperature: -40 to +85 ⁰ C Humidity (Non-Condensing): 5% to 95% Cooling: Convection Vibration Frequency: 5 to 50 Hz MTBF: >100,000 Hours at full load and 25ºC ambient conditions (TELC3 – Telcordia SR-332, Issue 3) SPECIFICATIONS : Input Range : 100 ~ 277VAC Frequency : 47 to 63Hz Power Factor: > 0.92 at 65% to 100% load, 115VAC or 230VAC Inrush Current : 2.0 Amps max. at 115VAC, cold start 25⁰C Input Current : 0.3 Amps max. at 115VAC Efficiency : 87% Typical Output Current Regulation : ±3% Maximum Power : 25W (Constant Voltage) Protection : OCP, SCP, OLP – Auto Recovery Leakage Current : 50uA typ. Control : 0-10V dimmer; PWM (250-3KHz); Potentiometer; Enable Dimension: refer to mechanical applications Hold up time: Half cycle min. at 120VAC and 80% rated load Regulation Compliance: UL8750 or EN61347, EN55015, EN61547 MODEL SELECTION : Model Number Constant Voltage Mode Model Number Constant Current Mode V (DC) A (mA) Max. W A (mA) V (DC) Max. W Q22-U12-XP 12, ±5% 2080 25 Q22-U12-Cyyyy-Xz 2500 ~ 1200 6 ~ 12 22 Q22-U24-XP 24, ±5% 1040 25 Q22-U24-Cyyyy-Xz 1250 ~ 6000 14 ~ 24 22 Q22-U36-XP 36, ±5% 700 25 Q22-U30-Cyyyy-Xz 1000 ~ 475 19 ~ 30 22 Q22-U48-XP 48, ±5% 520 25 Q22-U36-Cyyyy-Xz 825 ~ 400 23 ~ 36 22 Notes: yyyy = Output current “z” = P for plastic enclosure M for metal enclosure T for plastic enclosure with terminal blocks Q22-U42-Cyyyy-Xz 700 ~ 350 27 ~ 42 22 Q22-U48-Cyyyy-Xz 620 ~ 300 30 ~ 48 22 Q22-U54-Cyyyy-Xz 550 ~ 250 34 ~ 54 22 Dimming Wiring Diagram Picture shown above is not to scale (+)(-) PWM (250Hz~2KHz) DIM+ (PURPLE) DIM- (GRAY) LED Driver -V out (BLACK) +V out (RED) +10V OUT (YELLOW) NC/CAP PWM Controller (+)(-) DIMMER (sinking) DIM+ (PURPLE) DIM- (GRAY) LED Driver -V out (BLACK) +V out (RED) +10V OUT (YELLOW) Maximum current output: Typically 6mA. (+)(-) DIMMER (sourcing) DIM+ (PURPLE) DIM- (GRAY) LED Driver -V out (BLACK) +V out (RED) +10V OUT (YELLOW) NC/CAP Maximum current required: 1mA max per LF1048 driver. 10K ohm (min) potentiometer DIM+ (PURPLE) DIM- (GRAY) LED Driver -V out (BLACK) +V out (RED) +10V OUT (YELLOW)
www.magtechind.com Tel: 702‐364‐9998 Units: IN [mm] 1.65 [42.0] 1.14 [29.0] 4.76 [121.0] 4.02 [102.0] 2.00 [50.8] 8-32(x2) 4.49 [114.0] 1.01 [25.6] Units: IN [mm] 3.22 [81.8] Ø0.12 [Ø3.0] 0.13 [3.3] “Xm” – Stud‐mountable Metal Case “Xp” – Plastic Case De-rating Temp. vs. Load Efficiency vs. Load Power Factor vs. Load THD vs. Load PWM Dimming Curve 1-10V Dimming Curve MECHANICAL SPECIFICATION : Q22-UXX-XP-CYYYY