STD1LNK60Z-1_06 MICROSEMI | Alldatasheet

Document overview

  • Manufacturer or author: pROVIDED bY alldatasheet.com(free datasheet download site)
  • PDF pages: 14

Technical content

N-CHANNEL 600V - 13Ω - 0.8A - TO-92 - IPAK - SOT-223 Zener-Protected SuperMESH™ Power MOSFET General features ■ 100% avalanche tested ■ Extremely high dv/dt capability ■ Gate charge minimized ■ ESD improved capability ■ New high voltage benchmark

Description

The SuperMESH™ series is obtained through an extreme optimization of ST’s well established strip-based PowerMESH™ layout. In addition to pushing on-resistance significantly down, special care is taken to ensure a very good dv/dt capability for the most demanding applications. Such series complements ST full range of high voltage MOSFETs including revolutionary MDmesh™ products.

Applications

■ Switching application Internal schematic diagram Type V DSS RDS(on) ID Pw STD1LNK60Z-1 600V <15 Ω 0.8A 25W STQ1NK60ZR 600V <15 Ω 0.3A 3W STN1NK60Z 600V <15 Ω 0.3A 3.3W TO-92 (Ammopak) TO-92 SOT-223 IPAK Order codes Sales Type Marking Package Packaging STD1LNK60Z-1 D1LNK60Z IPAK TUBE STQ1NK60ZR Q1NK60ZR TO-92 BULK STQ1NK60ZR-AP Q1NK60ZR TO-92 AMMOPAK STN1NK60Z 1NK60Z SOT-223 TAPE & REEL

1 Electrical ratings

Table 1. Absolute maximum ratings

  1. Pulse width limited by safe operating area

Table 2. Thermal resistance

  1. When mounted on 1 inch² FR-4 board, 2 Oz Cu

Table 3. Avalanche data

2 Electrical characteristics

Table 4. On/off states Table 5. Dynamic

  1. Pulsed: pulse duration=300µs, duty cycle 1.5%
  2. C oss eq. is defined as a constant equivalent capacitance giving the same charging time as C oss when VDS

Table 6. Switching times Table 7. Source drain diode

  1. Pulse width limited by safe operating area
  2. Pulsed: pulse duration=300µs, duty cycle 1.5%

Table 8. Gate-source zener diode

  1. The built-in back-to-back Zener diodes have specifically been designed to enhance not only the device’s

usage of external components.

2.1 Electrical characteristics (curves)

Figure 1. Safe operating area for IPAK Figure 2. Thermal impedance for IPAK Figure 3. Safe operating area for TO-92 Figure 4. Thermal impedance for TO-92 Figure 5. Safe operating area for SOT-223 Figure 6. Thermal impedance for SOT-223

3 Test circuit

Figure 19. Switching times test circuit for Figure 20. Gate charge test circuit Figure 21. Test circuit for inductive load Figure 22. Unclamped Inductive load test Figure 23. Unclamped inductive waveform Figure 24. Switching time waveform

4 Package mechanical data

In order to meet environmental requirements, ST offers these devices in ECOPACK® packages. These packages have a Lead-free second level interconnect . The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com

DIM. mm. inch A 4.32 4.95 0.170 0.194 b 0.36 0.51 0.014 0.020 D 4.45 4.95 0.175 0.194 E 3.30 3.94 0.130 0.155 e 2.41 2.67 0.094 0.105 e1 1.14 1.40 0.044 0.055 L 12.70 15.49 0.50 0.610 R 2.16 2.41 0.085 0.094 S1 0.92 1.52 0.036 0.060 W 0.41 0.56 0.016 0.022 V5 ° 5 ° TO-92 MECHANICAL DATA

DIM. mm inch A 2.2 2.4 0.086 0.094 A1 0.9 1.1 0.035 0.043 A3 0.7 1.3 0.027 0.051 B 0.64 0.9 0.025 0.031 B2 5.2 5.4 0.204 0.212 B3 0.85 0.033 B5 0.3 0.012 B6 0.95 0.037 C 0.45 0.6 0.017 0.023 C2 0.48 0.6 0.019 0.023 D 6 6.2 0.236 0.244 E 6.4 6.6 0.252 0.260 G 4.4 4.6 0.173 0.181 H 15.9 16.3 0.626 0.641 L 9 9.4 0.354 0.370 L1 0.8 1.2 0.031 0.047 L2 0.8 1 0.031 0.039 A C H D LL2 1 3 = = B E G = = = = TO-251 (IPAK) MECHANICAL DATA 0068771-E

DIM. mm mils e4 0.32 12.6 C CB E L a b f g c d P008B SOT-223 MECHANICAL DATA

5 Revision history

Table 9. Revision history 15-Feb-2005 5 Modified Figure 3.