Z01 STMICROELECTRONICS | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 12
Technical content
Features
■ On-state rms current, IT(RMS) 1 A ■ Repetitive peak off-state voltage, VDRM/VRRM 600 or 800 V ■ Triggering gate current, IGT (Q1) 3 to 25 mA
Description
The Z01 series is suitable for general purpose AC switching applications. These devices are typically used in applications such as home appliances (electrovalve, pump, door lock, small lamp control), fan speed controllers,... Different gate current sensitivities are available, allowing optimized performance when driven directly through microcontrollers. G G G A1 A2 G TO-92 Z01xxA SOT-223 Z01xxN SMBflat-3L Z01xxMUF
1 Characteristics
Table 1. Absolute maximum ratings Table 2. Electrical characteristics (T j = 25 °C, unless otherwise specified)
- Minimum I GT is guaranteed at 5% of IGT max.
- For both polarities of A2 referenced to A1.
2 Ordering information scheme
Figure 14. Ordering information scheme
Table 5. Product Selector
600 V 800 V
3 Packaging information
- Epoxy meets UL94, V0
- Lead-free packages In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark.
Figure 15. SOT-223 footprint dimensions (in millimeters) Table 6. SOT-223 dimensions
- Do not include mold flash or protrusions. Mold flas h or protrusions shall not exceed 0.15mm (0.006inches)
Figure 16. SMBflat-3L footprint dimensions Table 7. TO-92 dimensions Table 8. SMBflat-3L dimensions
Figure 17. Footprint and connectors for SOT-223 or SMBflat-3L (dimensions in mm)
4 Ordering information
5 Revision history
Table 9. Ordering information
- xx = sensitivity, y = voltage
Table 10. Document revision history 10-Feb-2005 5 Package: TO-92 tape and reel delivery mode 5AL2 added.
- (dV/dt)c instead of (dI/dt)c
- V/µs unit instead of A/ms
GT split into two separate rows. to “lead or tab” in Figure 2. Added package SMBflat-3L. Updated dimensions in Table 6.