DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

www.magtechind.com Tel: 702‐364‐9998 Q12 Series Preliminary Product Specifications ANZ#: Z219, May 19, 2014 High Power LED Driver Total Power 12 Watts max. Input Voltages 110 ~ 277VAC Number of Outputs One SPECIAL FEATURES  Universal Input range from 100VAC~304VAC, 50/60Hz  Versatile mechanical design maximizes design flexibility.  Size: XP: TBD (LxWxH)  Fully potted, suitable for dry and damp location applications  4 in 1 Dimming Control plus “ENABLE” input  UL8750 and CE compliant (pending)  Wide selection of pre-adjusted C/C outputs (factory setting) ENVIRONMENTAL Operating temperature: -40 to +50 ⁰ C, Tc: 80 ⁰ C Storage temperature: -40 to +85 ⁰ C Humidity (Non-Condensing): 5% to 95% Cooling: Convection Vibration Frequency: 5 to 50 Hz MTBF: >100,000 Hours at full load and 25ºC ambient conditions (TELC3 – Telcordia SR-332, Issue 3) SPECIFICATIONS : Input Range : 100 ~ 277VAC Frequency : 47 to 63Hz Power Factor: > 0.92 at 65% to 100% load, 115VAC or 230VAC Inrush Current : 25.0 Amps max. at 230VAC, cold start 25⁰C Input Current : 0.25 Amps max. at 115VAC Efficiency : 87% Typical Output Current Regulation : ±3% Maximum Power : 12W Protection : OCP, SCP, OLP – Auto Recovery Leakage Current : 50uA typ. Control : 0-10V dimmer; PWM (250-3KHz); Potentiometer; Enable Dimension: XP: TBD (LxWxH) Hold up time: Half cycle min. at 120VAC and 80% rated load Regulation Compliance: UL8750 or EN61347, EN55015, EN61547 MODEL SELECTION : Model Number Constant Voltage Mode Model Number Constant Current Mode V (DC) A (mA) Max. W A (mA) V (DC) Max. W Q12-U12-XP 12, ±5% 1000 12 Q12-U12-Cyyyy-Xz 1300 ~ 1000 6 ~ 12 12 Q12-U24-XP 24, ±5% 500 12 Q12-U24-Cyyyy-Xz 675 ~ 500 14 ~ 24 12 Q12-U36-XP 36, ±5% 335 12 Q12-U30-Cyyyy-Xz 540 ~ 400 19 ~ 30 12 Q12-U48-XP 48, ±5% 850 12 Q12-U36-Cyyyy-Xz 450 ~ 335 23 ~ 36 12 Notes: yyyy = Output current “z” = P for plastic or M for metal enclosure Q12-U42-Cyyyy-Xz 385 ~ 285 27 ~ 42 12 Q12-U48-Cyyyy-Xz 360 ~ 250 30 ~ 48 12 Q12-U54-Cyyyy-Xz 300 ~ 220 34 ~ 54 12 Dimming Wiring Diagram Picture shown above is not to scale Picture Not Available (+)(-) PWM (250Hz~2KHz) DIM+ (PURPLE) DIM- (GRAY) LED Driver -V out (BLACK) +V out (RED) +10V OUT (YELLOW) NC/CAP PWM Controller (+)(-) DIMMER (sinking) DIM+ (PURPLE) DIM- (GRAY) LED Driver -V out (BLACK) +V out (RED) +10V OUT (YELLOW) Maximum current output: Typically 6mA. (+)(-) DIMMER (sourcing) DIM+ (PURPLE) DIM- (GRAY) LED Driver -V out (BLACK) +V out (RED) +10V OUT (YELLOW) NC/CAP Maximum current required: 1mA max per LF1048 driver. 10K ohm (min) potentiometer DIM+ (PURPLE) DIM- (GRAY) LED Driver -V out (BLACK) +V out (RED) +10V OUT (YELLOW)

www.magtechind.com Tel: 702‐364‐9998 Units: IN [mm] 1.65 [42.0] 1.14 [29.0] 4.76 [121.0] 4.02 [102.0] 2.00 [50.8] 8-32(x2) 4.49 [114.0] 1.01 [25.6] Units: IN [mm] 1.50 [38.0] 3.12 [79.3] 1.26 [32.0] R0.06 [R1.5] “Xm” – Stud‐mountable Metal Case “Xp” – Plastic Case De-rating Temp. vs. Load Efficiency vs. Load Power Factor vs. Load THD vs. Load PWM Dimming Curve 1-10V Dimming Curve MECHANICAL SPECIFICATION : Q38-UXX-Xz-CYYYY