Q1145

1M45T1B5M1QE MULTICOMP | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 11

Technical content

Page <1> V1.113/06/23 Toggle Switches Miniature Newark.com/multicomp-pro Farnell.com/multicomp-pro sg.element14.com/b/multicomp-pro Specifications Contact Rating : Dependent upon content material Mechanical Life : 40,000 make and break cycles Max. Contact Resistance : 10 mΩ Min. Insulation Resistance : 1,000MΩ Dielectric Strength : 1,000Vrms at sea level Operating Temperature : -30°C to 85°C Materials Case : Diallylphthalate (DAP) (UL94v-0) Actuator : Brass, chrome plated Bushing : Brass, nickel plated Housing : Stainless steel Switch support : Brass, tin plated Terminal/contact : Silver or gold plated Number of Poles UL/CSA Model Numbers Model Number Switch Function Connected Terminals/Schematic Position 1 Position 2 Position 3 Position 1 Position

2 Position 3

2 to 3, 5 to 6 2 to 3, 5 to 4 2 to 1, 5 to 4Q1127 1MD7 MOM MOM Q1128 1MD8 On Q1131 1M31 None On 2 to 3, 5 to 6, 8 to 9 N/A 2 to 1, 5 to 4, 8 to 7 Q1132 1M32 MOM Q1133 1M33 Off On Open Q1134 1M34 MOM MOM Q1135 1M35 On - Switch Function

Page <2> V1.113/06/23 Toggle Switches Miniature Newark.com/multicomp-pro Farnell.com/multicomp-pro sg.element14.com/b/multicomp-pro Number of Poles UL/CSA Model Numbers Model Number Switch Function Connected Terminals/Schematic Position 1 Position 2 Position 3 Position 1 Position 2 to 3, 5 to 6, 8 to 9, 11 to 12 2 to 1, 5 to 4, 8 to 7, 11 to 10 Q1142 1M42 MOM - Q1143 1M43 Off On - Q1144 1M44 MOM MOM Q1145 1M45 On Q1146 1M46 On On 2 to 3, 5 to 6, 8 to 9, 11 to 12 2 to 3, 5 to 4, 8 to 9, 11 to 10 2 to 1, 5 to 4, 8 to 7, 11 to 10 Q1147 1M47 MOM MOM Q1148 1M48 On Pole Options SPDT DPDT Dimensions : Inches (Millimetres)

Page <3> V1.113/06/23 Toggle Switches Miniature Newark.com/multicomp-pro Farnell.com/multicomp-pro sg.element14.com/b/multicomp-pro Pole Options 3PDT 4PDT Single Pole, 3 Position Double Pole, 3 Position Model No. 1M46 ON ON ON Term. Comm. 2 to 3, 5 to 6 8 to 9, 11 to 12 2 to 3, 5 to 4 8 to 9, 11 to 10 2 to 1, 5 to 4 8 to 7, 11 to 10 Model No. 1M46 ON ON ON Term. Comm. 2 to 3, 5 to 6 8 to 9, 11 to 12 2 to 3, 5 to 4 8 to 9, 11 to 10 2 to 1, 5 to 4 8 to 7, 11 to 10 Dimensions : Inches (Millimetres)

Page <4> V1.113/06/23 Toggle Switches Miniature Newark.com/multicomp-pro Farnell.com/multicomp-pro sg.element14.com/b/multicomp-pro 3-Way Wiring Diagram Schematics Actuator Options Note: T1 to T5 Actuator shown with standard B1 bushing : add. 07 (1.78) for B3 Bushing ; Subtract 0.02 (0.51) for B6 Bushing ; Std for M1, M2 Terminal sub 0.016 (0.4) for M6, M7, VSX Note: T6, T6-1, T6-2, T63 use with B11, B12, B15, B16 bushing only Dimensions : Inches (Millimetres)

Page <5> V1.113/06/23 Toggle Switches Miniature Newark.com/multicomp-pro Farnell.com/multicomp-pro sg.element14.com/b/multicomp-pro Dimensions : Inches (Millimetres) Use with B13 bushing Use with B18, B20 the lever is anti-rotation and the size of lever is 13mm Use with B13 bushing Use with B18, B20 the lever is anti-rotation and the size of lever is 18mm B1/B2 bushing std with black and red colour only (std). TA Plastic Black T11 Use with B18 bushing only Note: T11 Actuator shown with standard B1 bushing: Add 0.07 (1.78) for B3 bushing; Subtract 0.02 (0.51) for B6 bushing. Std for M1.M2 Terminal sub. 0.016 (0.4) for M6.M7.VSX Plastic No. Colour No. Colour

1 White

2 Black (Std)

3 Red

4 Orange

5 Yellow

6 Green

7 Blue

8 Brown

9 Grey

Page <6> V1.113/06/23 Toggle Switches Miniature Newark.com/multicomp-pro Farnell.com/multicomp-pro sg.element14.com/b/multicomp-pro B7 Thd STD B8 Metric Thd B6 High Torque B5 High Torque B3 THD B4 NON-THD B1 THD STD B2 NON-THD Dimensions : Inches (Millimetres) Use with T7, T8 actuators only B13 Bear strength from top of actuator up to 10 kg aside up to 15 kg

Page <7> V1.113/06/23 Toggle Switches Miniature Newark.com/multicomp-pro Farnell.com/multicomp-pro sg.element14.com/b/multicomp-pro B14 Splash Proof B18 B20 Dimensions : Inches (Millimetres) PTFE Use with T7, T8 and T10 actuators only with plastic (PTFE) Insert Use with T7, T8 and T10 actuators only B18, B20 Bear Strength from top of actuator up to 20kg aside up to 15kg Panel Mounting 1/4 In Bushing Metric Bushing 15/32 In Bushing 15/32 In BushingMetric Bushing1/4 In Bushing Termination Options M1 Solder Lug M2 PC Thru-Hole M5 Wire Wrap M3 Quick Connect Option Code Dimension ‘A’ M5-1 0.736 (18.7) M5-2 0.953 (24.2) M5-3 0.415 (10.55) M5-4 1.062 (26.97)

Page <8> V1.113/06/23 Toggle Switches Miniature Newark.com/multicomp-pro Farnell.com/multicomp-pro sg.element14.com/b/multicomp-pro Other Termination Options M6 Right Angle P.C. Mount M7 Right Angle P.C. Mount VS2 Vertical Bracket P.C. Mount VS3 Vertical Bracket P.C. Mount VS5 Vertical Bracket P.C. Mount RE Mating Quick Connector Amp P/N 60900-1 P. C. Mounting SNAP-IN Termination Options Dimensions : Inches (Millimetres)

Page <9> V1.113/06/23 Toggle Switches Miniature Newark.com/multicomp-pro Farnell.com/multicomp-pro sg.element14.com/b/multicomp-pro Hardware Lock Washer HDW1215/32 Nuts HDW4Optional Rubber Hood Sealing 1/4 Nuts HDW2 Supplied Standard with B1, B3, B5, B6 and B9 Options Dress Nut HDW3 Metric Nut HDW6 Supplied Standard with B8 metric bushing Lock Washer HDW11 Supplied standard with B13 bushing Dimensions : Inches (Millimetres) HDW15 HDW19 HDW20 HDW16 HDW17 HDW17 Locking ring supplied standard Nu-1M18 NU-1M24 Locking ring supplied with B5 bushing Locking ring supplied with B13, B18, B20 bushing Locking ring supplied with B8 bushing Optional Toggle Cap Cap Colour No. Colour

Page <10> V1.113/06/23 Toggle Switches Miniature Newark.com/multicomp-pro Farnell.com/multicomp-pro sg.element14.com/b/multicomp-pro Contact Material Options Contact Plating Terminal Plating Ratings Q Silver Q = Silver

5 Amperes with resistant load at 120V AC or 28V DC

2 Amps with resistant load at 250V AC

S S = Silver, pure-tin C Gold over Silver C = Gold over silver K K = Gold over silver, pure-tin R Gold R = Gold 0.4 Volt-Amperes (VA) maximum at (20 V maximum (AC or DC)G G = Gold, pure-tin Soldering Process Manual Soldering : Use soldering iron of 30 watts, controlled at 350°C approximately 5 seconds while applying solder Wave Soldering : Recommended soldering temperature : 260 ±5°C Duration of solder immersion : Maximum 5 ±1 seconds. (PCB is 1.6 mm in thickness) Soldering : Vapour Phase Part Number Table Description Part Number Switch, PCB, DPDT, ON-MOM 1MD2T2B4VS3RE Switch, PCB, DPDT, MOM-OFF-MOM 1MD4T2B4VS3RE Switch, PCB, DPDT, ON-OFF-ON 1MD3T2B4VS3RE Switch, PCB, DPDT, ON-OFF-MOM 1MD5T2B4VS3RE Switch, PCB, DPDT, ON-ON-ON 1MD6T2B4VS3RE Switch, PCB, SPDT, ON-MOM 1MS2T2B4M6RE Switch, PCB, SPDT, ON-OFF-MOM 1MS5T2B4M6RE Switch, PCB, DPDT, ON-MOM 1MD2T2B4M6RE Switch, PCB, DPDT, MOM-OFF-MOM 1MD4T2B4M6RE Switch, PCB, DPDT, ON-OFF-MOM 1MD5T2B4M6RE Switch, PCB, DPDT, ON-ON-ON 1MD6T2B4M6RE Switch, PCB, SPDT, ON-MOM 1MS2T2B4M7RE Switch, PCB, SPDT, MOM-OFF-MOM 1MS4T2B4M7RE Switch, PCB, SPDT, ON-OFF-MOM 1MS5T2B4M7RE Switch, PCB, DPDT, ON-MOM 1MD2T2B4M7RE Switch, PCB, DPDT, MOM-OFF-MOM 1MD4T2B4M7RE Switch, PCB, DPDT, ON-OFF-ON 1MD3T2B4M7RE Switch, PCB, DPDT, ON-OFF-MOM 1MD5T2B4M7RE Switch, PCB, DPDT, ON-ON-ON 1MD6T2B4M7RE Switch, SOLDER TAG, SPDT, ON-MOM 1MS2T1B5M1QE Switch, SOLDER TAG, SPDT, MOM-OFF-MOM 1MS4T1B5M1QE Switch, SOLDER TAG, SPDT, ON-OFF-MOM 1MS5T1B5M1QE Description Part Number Switch, SOLDER TAG, DPDT, ON-MOM 1MD2T1B5M1QE Switch, SOLDER TAG, DPDT, MOM-OFF-MOM 1MD4T1B5M1QE Switch, SOLDER TAG, DPDT, ON-OFF-MOM 1MD5T1B5M1QE Switch, SOLDER TAG, DPDT, ON-ON-ON 1MD6T1B5M1QE Switch, SOLDER TAG, 3PDT, ON-MOM 1M32T1B5M1QE Switch, SOLDER TAG, 3PDT, ON-ON 1M31T1B5M1QE Switch, SOLDER TAG, 3PDT, MOM-OFF-MOM 1M34T1B5M1QE Switch, SOLDER TAG, 3PDT, ON-OFF-ON 1M33T1B5M1QE Switch, SOLDER TAG, 3PDT, ON-OFF-MOM 1M35T1B5M1QE Switch, SOLDER TAG, 4PDT, ON-MOM 1M42T1B5M1QE Switch, SOLDER TAG, 4PDT, ON-ON 1M41T1B5M1QE Switch, SOLDER TAG, 4PDT, MOM-OFF-MOM 1M44T1B5M1QE Switch, SOLDER TAG, 4PDT, ON-OFF-ON 1M43T1B5M1QE Switch, SOLDER TAG, 4PDT, ON-OFF-MOM 1M45T1B5M1QE Switch, SOLDER TAG, 4PDT, ON-ON-ON 1M46T1B5M1QE Switch, PCB SPDT VERT. 1MS5T2B4V2RE. Switch, SPDT 1MS3T1B5M1QE. Switch, DPDT 1MD3T1B5M1QE. Switch, PCB, SPDT, VERT 1MS1T2B4V2RE Switch, PCB, SPDT, VERT 1MS3T2B4V2RE Switch, PCB, SPDT, VERT 1MS2T2B4V2RE Switch, PCB, SPDT, VERT 1MS4T2B4V2RE

Page <11> V1.113/06/23 Toggle Switches Miniature Newark.com/multicomp-pro Farnell.com/multicomp-pro sg.element14.com/b/multicomp-pro Description Part Number Switch, PCB, SPDT, VERT 1MS5T2B4V2RE Switch, PCB, DPDT, VERT 1MD1T2B4V3RE Switch, PCB, SPDT, HORIZ 1MS1T2B4M6RE Switch, PCB, SPDT, HORIZ 1MS3T2B4M6RE Switch, PCB, SPDT, HORIZ 1MS4T2B4M6RE Switch, PCB, DPDT, HORIZ 1MD1T2B4M6RE Description Part Number Switch, PCB, DPDT, HORIZ 1MD3T2B4M6RE Switch, PCB, SPDT, HORIZ 1MS1T2B4M7RE Switch, PCB, SPDT, HORIZ 1MS3T2B4M7RE Switch, PCB, DPDT, HORIZ 1MD1T2B4M7RE Switch, SPDT, 2.0A, 250V 1MS1T1B5M1QE Switch, SPDT 1MS3T1B5M1QE Part Number Explanation Important Notice : This data sheet and its contents (the “Information”) belong to the members of the AVNET group of companies (the “Group”) or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its negligence. Multicomp Pro is the registered trademark of Premier Farnell Limited 2019.