DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 18
Technical content
General Purpose Basic Switch n High precision basic switch in a variety of styles n Wide margins of operating conditions increase the operating speed range n Available in general purpose and drip- proof types
Ordering Information
Pin plunger Slim spring Short spring Spring Panel mount Panel mount Panel mount plunger plunger plunger plunger roller plunger cross roller plunger Hinge lever Low-force Low-force wire Short hinge Hinge roller Unidirectional Flexible rod hinge lever hinge lever roller lever lever short hinge roller lever Operating Part Number Actuator Characteristics Rated Current Solder Terminal Screw Terminal Pin plunger 15 A Z-15G Z-15G-B Slim spring plunger 15 A Z-15GS Z-15GS-B Short spring plunger Low OP 15 A Z-15GD Z-15GD-B Panel mount plunger Middle OP 15 A Z-15GQ Z-15GQ-B Panel mount roller plunger 15 A Z-15GQ22 Z-15GQ22-B Panel mount cross roller plunger 15 A Z-15GQ21 Z-15GQ21-B Hinge lever Low OF 15 A Z-15GW Z-15GW-B Low-force hinge lever 15 A Z-15GW4 Z-15GW4-B Short hinge roller lever 15 A Z-15GW22 Z-15GW22-B Hinge roller lever Parallel 15 A Z-15GW2 Z-15GW2-B Unidirectional short hinge roller lever Low OF 15 A Z-15GW2277 Z-15GW2277-B GENERAL PURPOSE TYPE Standard GENERAL PURPOSE
Z Z Operating Part Number Actuator Characteristics Rated Current Solder Terminal Screw Terminal Pin plunger 15 A — Z-15H-B Low-force hinge lever 15 A — Z-15HW24-B Low-force, wire hinge lever Low OF 15 A Z-15HW78 Z-15HW78-B Short hinge roller lever 15 A — Z-15HW22-B GENERAL PURPOSE TYPE High-sensitivity Operating Rated Contact Part Number Actuator Characteristics Current Gap Solder Terminal Screw Terminal Slim spring plunger 15 A 0.5 mm Z-15GS55 Z-15GS55-B Short spring plunger 15 A 0.5 mm Z-15GD55 Z-15GD55-B Spring plunger Middle OP 15 A 0.5 mm Z-15GK55 Z-15GK55-B High OP 15 A 0.5 mm Z-15GK355 Z-15GK355-B Panel mount plunger Middle OP 15 A 0.5 mm Z-15GQ55 Z-15GQ55-B Panel mount roller plunger 15 A 0.5 mm — Z-15GQ2255-B Panel mount cross roller plunger 15 A 0.5 mm — Z-15GQ2155-B Hinge lever Low OF 15 A 0.5 mm Z-15GW55 Z-15GW55-B Short hinge roller lever 15 A 0.5 mm Z-15GW2255 Z-15GW2255-B Hinge roller lever Parallel 15 A 0.5 mm Z-15GW255 Z-15GW255-B Flexible rod High OF 15 A 0.5 mm Z-15GNJ55 Z-15GNJ55-B DRIP-PROOF TYPE Standard Operating Rated Contact Part Number Actuator Characteristics Current Gap Solder Terminal Screw Terminal Panel mount plunger Middle OP 15 A 0.25 mm — Z-15HQ55-B Flexible rod High OF 15 A 0.25 mm — Z-15HNJS55-B DRIP-PROOF TYPE High-sensitivity Note: For smaller mounting hole types, please consult OMRON. Type Contact gap Features General purpose H: 0.25 mm Pin plunger and lever types available. (high sensitivity) Drip-proof and flexible rod types are also available. G: 0.5 mm (standard) Drip-proof H: 0.25 mm The pin plunger is sealed from the other switch mechanisms by a resilient rubber, (high sensitivity) and the case and cover are sealed by adhesive so that the switch is resistant to G: 0.5 mm (standard) humidity, oil and dust. The degree of protection conforms to IEC IP63. n BASIC CONTACT FORM Basic Contact form
Z Z Non-inductive load (A) Inductive load (A) Contact Rated Resistive load Lamp load Inductive load Motor load Inrush current (A) gap voltage NC NO NC NO NC NO NC NO NC NO G,H 125 VAC 15 (10) — 3 1.5 15 (10) — 5 2.5 30 max. 15 max. 250 VAC 15 (10) — 2.5 1.25 15 (10) — 3 1.5 500 VAC 10 — 1.5 0.75 6 — 1.5 0.75 G 8 VDC 15 — 3 1.5 15 — 5 2.5 14 VDC 15 — 3 1.5 10 — 5 2.5 30 VDC 6 — 3 1.5 5 — 5 2.5 H 8 VDC 15 — 3 1.5 15 — 5 2.5 14 VDC 15 — 3 1.5 10 — 5 2.5 3 0 V D C 2— 21 . 4 1— 11 Specifications Standard type (except flexible rod types) Non-inductive load (A) Inductive load (A) Rated Resistive load Lamp load Inductive load Motor load Inrush current (A) voltage NC NO NC NO NC NO NC NO NC NO 125 VAC 15 — 217— 2 . 5 23 0 max. 15 max. 250 VAC 15 — 1 0.5 5 — 1.5 1 8 V D C 1 5 — 217— 31 . 5 1 4 V D C 1 5 — 217— 31 . 5 3 0 V D C 2— 211— 10 . 5 Standard flexible rod types n CONSTRUCTION Drip-proof type Rubber cap protects the built-in switch from water and dust Fixed contact (NC) Glued surface (adhesive is filled between case and cover) Movable contact Fixed contact (NC) Movable spring Spring pivot
Z Z Standard Standard flexible rod types (except flexible rod types) (coil spring and steel wire type) Operating speed 0.01 mm to 1 m/second (see note 2) 1 mm to 1 m/second Operating frequency Mechanical 240 operations/min. 120 operations/min. Electrical 20 operations/min. 20 operations/min. Insulation resistance 100 M Ω min. (at 500 VDC) Contact resistance 50 m Ω max. (initial) 15 m Ω max. (initial) Dielectric strength (VAC) G contact gap model 1,000 VAC, 50/60 Hz for 1 minute between terminals of same polarity H contact gap model 600 VAC, 50/60 Hz for 1 minute 2,000 VAC, 50/60 Hz for 1 minute between current carrying metal parts and ground and between each terminal and non-current carrying metal parts Vibration Malfunction 10 to 55 Hz, 1.5 mm 10 to 20 Hz, 1.5 mm double amplitude (see note 4) double amplitude Shock Mechanical durability 1,000 m/s 2 min. (approx. 100 g) Malfunction 300 m/s 2 min. (approx. 30 g) (see note 3) 50 m/s2 min. (approx. 5 g) Ambient temperature Standard types -25 ° to 80°C (with no icing) Drip-proof types -15 ° to 80°C (with no icing) Humidity Standard types 35% to 85% RH Drip-proof types 35% to 95% RH Service life Mechanical G, H contact gap models 1,000,000 operations min. 20,000,000 operations min. (see note 4) Electrical G, H contact gap models 100,000 operations min. 500,000 operations min. (see note 2) Weight Approx. 22 to 58 g Approx. 42 to 48 g Characteristics n ACCESSORIES (order separately) ZAA-1 ZAA-2 Characteristics w/Z-15G-B w/Z-15G-B OF max. 500 g 500 g RF min. 170 g 170 g PT max. — — OT min. 12.7 mm 12.7 mm MD max. 2.2 mm 2.2 mm FP max. 34.5 mm 46.1 mm OP 28.9 ±1.6 mm 40.4 ±1.6 mm Operating Characteristics (when used with Z-15) Material Mounting method For solder terminal For screw terminal Remarks Phenolic resin Side mounting AP-A AP-B — Metal Side mounting AP1-A AP1-B Use in conjunction with AP-A and AP-B Polyvinyl chloride Side mounting AP-Z AP-Z Excels in safety and dust-proofing property Terminal enclosures - Standard models Note: 1. Data shown are of initial value. 2. Apply to the pin plunger models or the pin plunger of the lever models. 3. Apply to Z-15G. 4. Apply to the pin plunger models.
Z Z n CHARACTERISTIC DATA Mechanical service life Electrical service life Z-15G Z-15G Number of operations (x106) Number of operations (x104) Overtravel (mm) Switching current (A)
Z Z Dimensions Z-15G-B, Z-15H-B Operating characteristics Z-15G-B Z-15H-B OF 250 to 350 g 200 to 280 g RF min. 114 g 114 g OP 15.9 ± 0.4 mm 15.9 ± 0.4 mm Unit: mm (inch) Operating characteristics Z-15GS-B OF 250 to 350 g RF min. 114 g PT max. 0.4 mm (0.02) OT min. 1.6 mm (0.06) MD max. 0.05 mm (0.002) OP 28.2 ± 0.5 mm (1.1 ± 0.02) Z-15GS-B Operating characteristics Z-15GD-B OF 250 to 350 g RF min. 114 g PT max. 0.4 mm (0.02) OT min. 1.6 mm (0.06) MD max. 0.05 mm (0.002) OP 21.5 ± 0.5 mm (0.85 ± 0.02) Z-15GD-B Note: 1. Unless otherwise specified, a tolerance of ± 0.4 mm applies to all dimensions. 2. For smaller diameter mounting holes, please consult OMRON. 3. All drawings show the switches with screw terminals. For solder terminals, remove the “-B” from the end of the part number.
Z Z Operating characteristics Z-15GQ-B OF 250 to 350 g RF min. 114 g PT max. 0.4 mm (0.02) OT min. 5.5 mm (0.22) MD max. 0.05 mm (0.002) OP 21.8 ± 0.8 mm (0.86 ± 0.03) Z-15GQ-B Operating characteristics Z-15GQ22-B OF 250 to 350 g RF min. 114 g PT max. 0.4 mm (0.02) OT min. 3.58 mm (0.14) MD max. 0.05 mm (0.002) OP 33.4 ± 1.2 mm (1.31 ± 0.05) Z-15GQ22-B Operating characteristics Z-15GQ21-B OF 250 to 350 g RF min. 114 g PT max. 0.4 mm (0.02) OT min. 3.58 mm (0.14) MD max. 0.05 mm (0.002) OP 33.4 ± 1.2 mm (1.31 ± 0.05) Z-15GQ21-B Note: 1. Unless otherwise specified, a tolerance of ± 0.4 mm applies to all dimensions. 2. For smaller diameter mounting holes, please consult OMRON. 3. All drawings show the switches with screw terminals. For solder terminals, remove the “-B” from the end of the part number.
Z Z Operating characteristics Z-15GW-B OF max. 70 g RF min. 14 g OT min. 5.6 mm (0.22) MD max. 1.27 mm (0.05) FP max. 28.2 mm (1.11) OP 19 ± 0.8 mm (0.75 ± 0.03) Z-15GW-B Operating characteristics Z-15GW4-B OF max. 28 g RF min. 3.5 g PT max. 10 mm (0.39) OT min. 5.6 mm (0.22) MD max. 1.27 mm (0.05) OP 19 ± 0.8 mm (0.75 ± 0.03) Z-15GW4-B Operating characteristics Z-15HW24-B OF max. 6 g RF min. 0.5 g PT max. 19.8 mm (0.78) OT min. 10 mm (0.39) MD max. 2 mm (0.08) OP 19.8 ± 1.6 mm (0.75 ± 0.03) Z-15HW24-B Operating characteristics Z-15HW78-B OF max. 4 g RF min. 0.3 g PT max. 10 mm (0.39) OT min. 6 mm (0.24) MD max. 3 mm (0.12) OP 20 ± 1 mm (0.79 ± 0.04) Z-15HW78-B Note: 1. Unless otherwise specified, a tolerance of ± 0.4 mm applies to all dimensions. 2. For smaller diameter mounting holes, please consult OMRON. 3. All drawings show the switches with screw terminals. For solder terminals, remove the “-B” from the end of the part number. Unit: mm (inch)
Z Z Z-15GW22-B, Z-15HW22-B Operating characteristics Z-15GW22-B Z-15HW22-B OF max. 160 g 150 g RF min. 42 g 42 g OP 30.2 ± 0.4 mm 30.2 ± 0.4 mm Operating characteristics Z-15GW2-B OF max. 100 g RF min. 22 g OT min. 4 mm (0.16) MD max. 1.02 mm (0.04) FP max. 36.5 mm (1.44) OP 30.2 ± 0.8 mm (1.19 ± 0.03) Z-15GW2-B Operating characteristics Z-15GW2277-B OF max. 170 g RF min. 42 g OT min. 2.4 mm (0.09) MD max. 0.51 mm (0.02) FP max. 43.6 mm (1.72) OP 41.3 ± 0.8 mm (1.63 ± 0.03) Z-15GW2277-B Note: 1. Unless otherwise specified, a tolerance of ± 0.4 mm applies to all dimensions. 2. For smaller diameter mounting holes, please consult OMRON. 3. All drawings show the switches with screw terminals. For solder terminals, remove the “-B” from the end of the part number.
Z Z Operating characteristics Z-15GK355-B OF max. 540 g RF min. 114 g PT max. 2.4 mm (0.09) OT min. 3.5 mm (0.14) MD max. 0.06 mm (0.002) OP 37.8 ± 1.2 mm (1.49 ± 0.05) Z-15GK355-B Z-15GQ55-B, Z-15HQ55-B Operating characteristics Z-15GQ55-B Z-15GH55-B OF max. 540 g 400 g RF min. 114 g 114 g OP 21.8 ± 0.8 mm 21.8 ± 0.8 mm Operating characteristics Z-15GQ2255-B OF max. 540 g RF min. 114 g PT max. 1.8 mm (0.07) OT min. 3.58 mm (0.14) MD max. 0.06 mm (0.002) OP 33.4 ± 1.2 mm (1.31 ± 0.05) Z-15GQ2255-B Note: 1. Unless otherwise specified, a tolerance of ± 0.4 mm applies to all dimensions. 2. For smaller diameter mounting holes, please consult OMRON. 3. All drawings show the switches with screw terminals. For solder terminals, remove the “-B” from the end of the part number.
Z Z Operating characteristics Z-15GQ2155-B OF max. 540 g RF min. 114 g PT max. 1.8 mm (0.07) OT min. 3.58 mm (0.14) MD max. 0.06 mm (0.002) OP 33.4 ± 1.2 mm (1.31 ± 0.05) Z-15GQ2155-B Operating characteristics Z-15GW55-B OF max. 100 g RF min. 14 g OT min. 5.6 mm (0.22) MD max. 2 mm (0.08) FP max. 28.2 mm (1.11) OP 19 ± 0.8 mm (0.75 ± 0.03) Z-15GW55-B Operating characteristics Z-15GW2255-B OF max. 200 g RF min. 42 g OT min. 2.44 mm (0.10) MD max. 0.8 mm (0.03) FP max. 32.9 mm (1.30) OP 30.2 ± 0.4 mm (1.19 ± 0.02) Z-15GW2255-B Operating characteristics Z-15GW255-B OF max. 130 g RF min. 21 g OT min. 4 mm (0.16) MD max. 1.6 mm (0.06) FP max. 36.5 mm (1.44) OP 30.2 ± 0.8 mm (1.19± 0.03) Z-15GW255-B Note: 1. Unless otherwise specified, a tolerance of ± 0.4 mm applies to all dimensions. 2. For smaller diameter mounting holes, please consult OMRON. 3. All drawings show the switches with screw terminals. For solder terminals, remove the “-B” from the end of the part number. Unit: mm (inch)
Z Z Operating characteristics Z-15GNJ55-B OF max. 50 g PT max. 20 mm* (0.79) Z-15GNJ55-B * Reference value Operating characteristics Z-15HNJ55-B OF max. 15 g PT max. 25 mm* (0.98) Z-15HNJS55-B * Reference value Note: 1. Unless otherwise specified, a tolerance of ± 0.4 mm applies to all dimensions. 2. For smaller diameter mounting holes, please consult OMRON. 3. All drawings show the switches with screw terminals. For solder terminals, remove the “-B” from the end of the part number.
Z Z n TERMINALS Solder terminal (blank) Screw terminal (B) n MOUNTING HOLES Side mounting Panel mounting plunger type Roller plunger type Unit: mm (inch) n MOLDED TERMINAL TYPE The solder terminal type can be supplied with molded terminals with a choice of five different lead outlet directions. When placing your order for the molded terminal type, add the following code to the model number. -Mnnnn Note: 1. Standard leads are single-core vinyl cords (VSF) with a nominal cross sectional area of 1.25 mm2. 2. Standard vinyl cord lengths are 1 m, 3 m, and 5 m. 3. Mold thickness will be 19 mm when using VCT cords. 4. Standard unit has three lead outlets in the same direction. 5. Connect the black lead to the COM terminal, white lead to the NO terminal, and red lead to the NC terminal, respectively. n DIRECTIONS OF LEAD OUTLETS The following diagrams show the molded terminal version of sealed type Z-15GW2255, with a mold thickness of 12 mm. Z-15GW2255-ML Z-15GW2255-MF Z-15GW2255-MR Z-15GW2255-MH Z-15GW2255-MD (left-hand) (forward) (right-hand) (rearward) (underside) Note: Respective directions of lead outlets are determined with the plunger viewed on your left. Nominal cross- Finished outer Connection to Type sectional area (mm 2) diameter (mm) terminal Length (m) VSF (single-core, vinyl cord) 1.25 Approx. 3.1 Black-COM 0.5, 1, 2, 3, 5 VCT (vinyl-insulated cable) Approx. 9.6 (2-core) White-NO (standard) Approx. 10.5 (3-core) Red-NC n LEAD WIRE SPECIFICATIONS Lead outlet directions (L, R, D, F , H) Mold thickness (No symbol)…a = 12 mm with VSF 19…a = 19 mm with VCT Three M4 x 5.5 dia. Terminal screws (with tooth washers)
Z Z n ACCESSORIES, order separately Hinge lever Hinge roller lever ZAA-1 ZAA-2 Note: Unless otherwise specified, a tolerance of ± 0.8 mm applies to all dimensions. Panel mount plunger ZAQ-2 Operating characteristicsZAQ-2 with Z-15G OF max. 550 g RF min. 144 g RT max. 1 mm (0.04 in) OT min. 4.5 mm (0.18 in) MD max. 0.2 mm (0.01 in) OP 53.2 ±1.5 mm (2.09±0.06 in) Panel mount plunger ZAQ-3 Operating characteristicsZAQ-3 with Z-15G OF max. 550 g RF min. 144 g RT max. 1 mm (0.04 in) OT min. 4.5 mm (0.18 in) MD max. 0.2 mm (0.01 in) OP 27.8 ±1.5 mm (1.09±0.06 in)
Z Z Panel mount plunger ZAQ-1 Operating characteristicsZAQ-1 with Z-15G OF max. 550 g RF min. 144 g RT max. 1 mm (0.04 in) OT min. 20.4 mm (0.80 in) MD max. 0.2 mm (0.01 in) OP 69.1 ±1.5 mm (2.72±0.06 in) AP-A (for solder terminal) AP1-A (for solder terminal) AP-B (for screw terminal) AP1-B AP-Z Note: Unless otherwise specified, a tolerance of ± 0.4 mm applies to all dimensions. Note: Unless otherwise specified, a tolerance of ± 0.8 mm applies to all dimensions.
Z Z OMRON ELECTRONICS, INC. OMRON CANADA, INC. One East Commerce Drive 885 Milner Avenue Schaumburg, IL 60173 Scarborough, Ontario M1B 5V8 1-800-55-OMRON 416-286-6465