PZ120RS APEM | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 4
Technical content
Custom markings on request DISTINCTIVE FEATURES Piezoelectric keypads PZ series The company reserves the right to change specifications without notice.
- Output type : 4 x 3 matrix (NO contacts)
- Contact bounce time : 1ms max.
- Insulation resistance (OFF = not actuated) : 5 MΩ min.
- Initial contact resistance (ON = actuated) : 7.5 Ω max.
- Switching Voltage max. : 24 VDC
- Switching Current max. : 200 mA
- Electrical life : 10 million cycles min.
- ESD test : 20 KV max. according to IEC 1000-4-2 ELECTRICAL SPECIFICATIONS
- Sealing : IP68 front and rear according to IEC 60529
- Operating and storage temperature :
- Rapid temperature variation test according to IEC 68-2-14 test N
- Endurance test at extreme temperatures : 300.000 cycles
- Shock resistance according to NF EN 60068-2-27 : up to 90 G
- Abrasion test R3799 with Taber 5900 : 1.000.000 cycles min.
- Flame resistance : UL94 HB horizontal position (30 seconds max.)
- Salt spray : 96 hours according to IEC 68-2-11 test Ka
- Washability : most commonly used detergents and solvents ENVIRONMENTAL SPECIFICATIONS SWITCH PANELS KBD-PZ-1803
- Front panel : anodized aluminum
- Case : hard thermoplastic resin
- Sealing O-ring : neoprene
- Marking : chemically structured anodized silk screen with high abrasion resistance APEM products may be recycled at end-of-life for the re-claiming of valuable metal components. MATERIALS Piezoelectric keypads PZ series
- Specific marking including colors
- Backlighted version (under development) EXTRA FEATURES AVAILABLE ON REQUEST
- Actuating contact force : 2 to 4 N (depending on temperature)
- Stroke : none
- Mechanical life : 10 million cycles min.
- Connection : 8-pin male connector GENERAL SPECIFICATIONS SWITCH PANELS
0 Aluminum natural
12-KEY MODEL - FRONT MOUNTING PZ120FS 12-KEY MODEL - REAR MOUNTING PZ120RS SWITCH PANELS