DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Features

■ PXI specifications Rev. 2.2 compliant (PXI-9527) ■ 24-bit Sigma-Delta ADC and DAC ■ 2-CH simultaneous sampling analog input ■ 2-CH simultaneous updated analog output ■ 432 kS/s maximum sampling rate with software programmable rate ■ Programmable input range: ±40 V , ±10 V , ±3.16 V , ±1 V , ±0.316 V ■ Programmable output range: ±10 V , ±1 V , ±0.1 V ■ AC or DC input coupling, software selectable ■ T rigger I/O connector for external digital trigger signal ■ Supports IEPE output on each analog input, software-configurable ■ Supported Operating System

  • Windows 7/8 x64/x86, Linux ■ Driver and SDK
  • LabVIEW , MATLAB, C/C++, Visual Basic, Visual Studio.NET ■ Software Utility
  • DSA Utility ■ Dynamic Signal Assistant ADLINK’s Dynamic Signal Assistant is a ready-to-run software utility designed for dynamic signal acquisition modules, such as the PCI/PXI-9527. This software provides a windows-based configuration interface for setting parameters, in addition to a real-time visualized data display on the screen. An instrument- like user interface is also provided for basic waveform generation. The Dynamic Signal Assistant can also log data acquired from hardware modules. With the Dynamic Signal Assistant, signal acquisition and generation can be performed in just a few minutes without any programming effort. PCI-9527 PXI-9527 2-19 www.adlinktech.com

Updated September 23, 2014. ©2014 ADLINK Technology, Inc. All Rights Reserved. All specifications are subject to change without further notice. Differential Configuration Pseudodifferential Configuration Between positive output and chassis ground

2.2 KΩ 83 Ω

2.2 KΩ 50 Ω

33 Ω 33 Ω Cable Accessories Cable Description SMB-SMB-1M 1 meter SMB to SMB cable SMB-BNC-1M 1 meter SMB to BNC cable

Ordering Information

■ PCI-9527 2-CH 24-Bit 432 kS/s High-Resolution Dynamic Signal Acquisition and Generation module for PCI bus ■ PXI-9527 2-CH 24-Bit 432 kS/s High-Resolution Dynamic Signal Acquisition and Generation module for PXI bus Analog Output ■ Number of output channels: 2 ■ Output configuration: Differential or pseudo-differential, each channel independently software-selectable ■ DAC resolution: 24-bit ■ DAC type: Sigma-Delta ■ Update rate: 1 kS/s to 216 kS/s in 227.3 μS/s increments ■ FIFO buffer size: 2048 samples for each analog output channel ■ Output signal range: ±0.1 V , ±1 V , ±10 V ■ Voltage output coupling: DC ■ Minimum working load: 600 Ω ■ AO Offset error and gain error: ■ Output impedance: AI0 AI1 AO0 AO1 Ext. T rig Ext. T rig AI0 AI1 AO0 AO1 IO connector definition IO connector definition AI Offset Error Input Range Offset (±mV) ±40 V 0.5 ±10 V 0.2 ±3.16 V 0.1 ±1 V 0.05 ±0.316 V 0.05 Crosstalk Crosstalk Adjacent channel < -100 dB Measured with ±10 V input Input signal is 18 Vpp @ 1KHz sine wave Analog Input Channel Bandwidth Input Range Bandwidth (-3dB) ±0.316 V 130 KHz Output Range AO Offset Error AO Gain Error ±1 V ±0.25 mV 0.4% ±10 V ±1 mV 0.4% ■ Analog output, -3dB bandwidth: 110 KHz ■ AO THD+N T riggers ■ T rigger sources:

  • Software trigger
  • Analog trigger
  • External digital trigger
  • PXI Star trigger (PXI-9527)
  • PXI T rigger bus [0..7] (PXI-9527) ■ T rigger mode:
  • Post-trigger
  • Delay-trigger ■ Analog trigger
  • Source: AI0, AI1
  • T rigger level: full scale input range
  • T rigger conditions: positive or negative trigger, software selectable
  • T rigger resolution: 24-bit ■ External digital trigger
  • Source: front panel SMB connector
  • Compatibility: 5 V TTL
  • T rigger polarity: rising or falling edge
  • Pulse width: 300 ns minimum System Timebase Characteristics ■ Clock frequency: 80 MHz ■ Accuracy: ±20 ppm, over operating temperature range Timebase source ■ Internal (on board): 125 MHz ■ External: PXI backplane 10 MHz (PXI version) General Specifications ■ I/O connector
  • BNC x 4 for analog inputs/outputs
  • SMB x 1 for external trigger ■ PCI Bus Signaling: Universal PCI, support 3.3 V and 5 V PCI signals ■ Dimensions (not including connectors) ■ Ambient temperature (Operational):
  • 0˚C to 55˚C (32˚F to 131˚F) (PXI version)
  • 0˚C to 50˚C (32˚F to 122˚F) (PCI version) ■ Ambient temperature (Storage):
  • -20˚C to 80˚C (-4˚F to 176˚F) ■ Relative humidity:
  • 10% to 90% non-condensing Output Range 100 Hz to 20 KHz, 200 kS/s ± 0.1 V -89 dB ± 1 V -101 dB ± 10 V -101 dB Power Rail Standby Current (mA) Full Load (mA) +5 V 930 2330 +12 V 310 350 Calibration ■ Onboard reference: +5 V ■ T emperature coefficient: ≦ ±5 ppm/°C ■ Recommend Warm-up time: 15 minute ■ Power Requirement Certifications EMC/EMI: CE, FCC Class A PCI-9527 PXI-9527 ■ AC couple bandwidth
  • -3dB cutoff frequency: 3.5 Hz
  • -0.1dB cutoff frequency: 26 Hz AI Gain Error Input Range ±40V ±0.5% ±30V~±0.316V ±0.2% High-Resolution Modules 2-20www.adlinktech.com