PXI-8101

PXI-8101 NI | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 6

Technical content

2.0 GHz single-core for PXI-8101, ◾◾

1.9 GHz dual-core for PXI-8102

1 GB (1 x 1 GB DIMM) 800 MHz ◾◾

80 GB integrated hard-drive standard◾◾

2 Hi-Speed USB ports◾◾

value, PC-based platform for test, measurement, and control applications. Table 1. NI PXI-8101 and PXI-8102 Features to daughter boards. The PXI-8101 block diagram is shown in Figure 2. Figure 1. Embedded Controller Benchmarks

RS232 port is available for connecting to serial devices. controllers ideal for data-intensive applications requiring significant analysis. DIMM) of RAM is standard with upgrade options to 4 GB. included with the controller for use with VGA monitors. CompactPCI video module to connect two monitors to your PXI system. connecting the two monitors. controllers. For more information on this tool, refer to KnowledgeBase 2ZKC02OK. Figure 2. NI PXI-8101 Block Diagram

2 Hi-Speed

BUY ONLINE at ni.com or C ALL 800 813 36 93 (U.S.) High-Value Embedded Controllers for PXI Software The PXI-8101 and PXI-8102 come with the following minimum set of software already installed: Microsoft Windows OS (contact National Instruments or visit ◾◾ ni.com/pxiadvisor for a list of available Microsoft OSs and for localized versions) NI-VISA and NI-488.2 drivers◾◾ Drivers for all built-in I/O ports (Table 1)◾◾ System Assurance Programs NI system assurance programs are designed to make it even easier for you to own an NI system. These programs include configuration and deployment services for your NI PXI, CompactRIO, or Compact FieldPoint system. The NI Basic System Assurance Program provides a simple integration test and ensures that your system is delivered completely assembled in one box. When you configure your system with the NI Standard System Assurance Program, you can select from available NI system driver sets and application development environments to create customized, reorderable software configurations. Your system arrives fully assembled and tested in one box with your software reinstalled. When you order your system with the standard program, you also receive system- specific documentation including a bill of materials, an integration test report, a recommended maintenance plan, and frequently asked question documents. Finally, the standard program reduces the total cost of owning an NI system by providing three years of warranty coverage and calibration service. Use the online product advisors at ni.com/advisor to find a system assurance program to meet your needs.

Ordering Information

For online configuration of a complete PXI system, including NI system assurance programs, visit ni.com/pxiadvisor. Step 1. Select controller model. Step 2. Replace “xx” to select installed OS. Windows Vista – downgraded to Windows XP 1Contact National Instruments or visit ni.com/pxiadvisor for the latest operating systems. Step 3. Memory upgrades – select the amount of upgrade memory. Standard:

1 GB (1 x 1 GB DIMM)

Recommended upgraded memory configurations:

2 GB (1 x 2 GB DIMM must be purchased)

4 GB (1 x 4 GB DIMM must be purchased)

Step 4. Select Accessories.2 NI MKD-1117 (rack-mount 1U LCD monitor, NI FPT-1015 (flat panel touch screen with

2 For additional peripheral I/O modules, including serial, IEEE 1394, and SCSI,

visit ni.com/pxiadvisor. BUY NOW For complete product specifications, pricing, and accessory information, call 800 813 3693 (U.S.) or go to ni.com/pxi.

BUY ONLINE at ni.com or C ALL 800 813 36 93 (U.S.) Specifications Specifications subject to change without notice.

Features

System memory (RAM) 2.5 in., 9.5 mm Serial ATA 1.0 interface GM45 Express Chipset) (adapter cable not included) Power Requirements Voltage (V) Current (A) Typical Maximum PXI-8101 PXI-8102 PXI-8101 PXI-8102 +5 3.50 4.00 6.6 7.80 +12 0.001 0.001 0.075 0.075 -12 0.0 0 .0 0.0 0.0 Physical 4.0 by 13 by 21.6 cm (1.59 by 5.1 by 8.5 in.) expansion slot Environment (at 25 °C ambient temperature) Indoor use only. Operating Environment (tested in accordance with IEC-60068-2-1 and IEC-60068-2-2) (tested in accordance with IEC-60068-2-56) 1 For chassis that are not available in the online catalog at ni.com, contact National Instruments for supported operating temperatures. 25 to 40 °C for the NI PXI-1000B DC.

3 Processor should not throttle CPU frequency under reasonable, worst case

processor workloads in high operating temperature. Storage Environment (tested in accordance with IEC-60068-2-1 and IEC-60068-2-2) (tested in accordance with IEC-60068-2-56) Shock and Vibration (tested in accordance with IEC-60068-2-27; test profile developed in accordance with MIL-PRF-28800F) Random vibration (with solid-state hard drive) (tested in accordance with IEC-60068-2-64; nonoperating test profile exceeds the requirements of MIL-PRF-28800F, Class 3) High-Value Embedded Controllers for PXI

BUY ONLINE at ni.com or C ALL 800 813 36 93 (U.S.) High-Value Embedded Controllers for PXI Safety Compliance IEC 61010-1, EN 61010-1 ◾◾ UL 61010-01, CSA 61010-1◾◾ Electromagnetic Compatibility EN 61326 (IEC 61326): Class A emissions; Basic immunity◾◾ EN 55011 (CISPR 11): Group 1, Class A emissions◾◾ AS/NZS CISPR 11: Group 1, Class A emissions◾◾ FCC 47 CFR Part 15B: Class A emissions◾◾ ICES-001: Class A emissions◾◾ CE Compliance This product meets the essential requirements of applicable European Directives, as amended for CE marking, as follows: 2006/95/EC; Low-Voltage Directive (safety)◾◾ 2004/108/EC; Electromagnetic Compatibility Directive (EMC)◾◾ Note: Refer to the Declaration of Conformity (DoC) for this product for any additional regulatory compliance information. To obtain the DoC for this product, visit ni.com/certification, search by model number or product line, and click the appropriate link in the Certification column. Waste Electrical and Electronic Equipment (WEEE) EU Customers: At the end of their life cycle, all products must be sent to a WEEE recycling center. For more information about WEEE recycling centers and National Instruments WEEE initiatives, visit ni.com/environment/weee.htm.

NI has the services and support to meet your needs around the globe and through the application life cycle – from planning and development through deployment and ongoing maintenance. We offer services and service levels to meet customer requirements in research, design, validation, and manufacturing. Visit ni.com/services. Training and Certification NI training is the fastest, most certain route to productivity with our products. NI training can shorten your learning curve, save development time, and reduce maintenance costs over the application life cycle. We schedule instructor-led courses in cities worldwide, or we can hold a course at your facility. We also offer a professional certification program that identifies individuals who have high levels of skill and knowledge on using NI products. Visit ni.com/training. Professional Services Our NI Professional Services team is composed of NI applications and systems engineers and a worldwide National Instruments Alliance Partner program of more than 600 independent consultants and integrators. Services range from start-up assistance to turnkey system integration. Visit ni.com/alliance. OEM Support We offer design-in consulting and product integration assistance if you want to use our products for OEM applications. For information about special pricing and services for OEM customers, visit ni.com/oem. Local Sales and Technical Support In offices worldwide, our staff is local to the country, giving you access to engineers who speak your language. NI delivers industry-leading technical support through online knowledge bases, our applications engineers, and access to 14,000 measurement and automation professionals within NI Developer Exchange forums. Find immediate answers to your questions at ni.com/support. We also offer service programs that provide automatic upgrades to your application development environment and higher levels of technical support. Visit ni.com/ssp. Hardware Services System Assurance Programs NI system assurance programs are designed to make it even easier for you to own an NI system. These programs include configuration and deployment services for your NI PXI, CompactRIO, or Compact FieldPoint system. The NI Basic System Assurance Program provides a simple integration test and ensures that your system is delivered completely assembled in one box. When you configure your system with the NI Standard System Assurance Program, you can select from available NI system driver sets and application development environments to create customized, reorderable software configurations. Your system arrives fully assembled and tested in one box with your software preinstalled. When you order your system with the standard program, you also receive system- specific documentation including a bill of materials, an integration test report, a recommended maintenance plan, and frequently asked question documents. Finally, the standard program reduces the total cost of owning an NI system by providing three years of warranty coverage and calibration service. Use the online product advisors at ni.com/advisor to find a system assurance program to meet your needs. Calibration Services NI recognizes the need to maintain properly calibrated devices for high- accuracy measurements. We provide manual calibration procedures, services to recalibrate your products, and automated calibration software specifically designed for use by metrology laboratories. Visit ni.com/calibration. Repair and Extended Warranty NI provides complete repair services for our products. Express repair and advance replacement services are also available. We offer extended warranties to help you meet project life-cycle requirements. Visit ni.com/services. ni.com n 800 813 3693 National Instruments n info@ni.com SERVICE NEEDS M AINTAIN PLAN DEVELOPDEPLOY ©2009 National Instruments. All rights reserved. CompactRIO, FieldPoint, National Instruments, National Instruments Alliance Partner, NI, NI-488, and ni.com are trademarks of National Instruments. Other product and company names listed are trademarks or trade names of their respective companies. A National Instruments Alliance Partner is a business entity independent from National Instruments and has no agency, partnership, or joint-venture relationship with National Instruments. 0081