PXI-1033 NI | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

automotive, ATE, and electronics. temperature range of 0 to 50 °C. shows PXI-1033 acoustic emissions.

  • Low-cost chassis for remote control applications
  • Controlled from either a PCI Express desktop host or an ExpressCard laptop host
  • MXI-Express remote controller achieves up to 110 MB/s sustained throughput
  • Rugged, compact package accepts up to 5 peripheral modules
  • Acoustic noise as low as 38 dBA
  • Accepts both 3U PXI and CompactPCI modules Options
  • Compatible with all PXI-103x family accessories
  • Rack-mount kit
  • Handle and feet kit NI PXI-1033 Series Sound Pressure Level1 (dBA) (measured at operator interface) Auto Fan (25 ° C ambient) 37.4 High Fan 51.5 1Tested in accordance with ISO 7779

Table 1. PXI-1033 Acoustic Emissions

PXI Chassis with Integrated MXI-Express Remote Controller BUY ONLINE at ni.com or CALL (800) 813 3693 (U.S.)

Ordering Information

For online configuration of a complete PXI system, including chassis, modules, and all accessories, visit ni.com/pxiadvisor. Step 1. Select the chassis/host. Chassis for PCI Express host NI PXI-1033 with Chassis for ExpressCard host NI PXI-1033 with Step 2. Select additional cables, if necessar y. MXI-Express Cable Step 3. Select one or more power cords. AC Power Cords Step 4. Select additional accessories. PXI chassis slot-blocker kit 1Every PXI-1033 includes four single filler panels. Step 5. Select system setup and installation services. Receive this system with software installed and an additional one-year warranty on all components. Order through Factory Installation Services. BUY NOW! For complete product specifications, pricing, and accessory information, call (800) 813 3693 (U.S. only) or go to ni.com/pxi.

Complies with PXI Hardware Specification, Revision 2.2. Accepts modules compliant with CompactPCI and PICMG. Electrical AC Input Operating frequency range controls the internal chassis power supply that provides DC power to the PCI/CompactPCI backplane. 1The operating range is guaranteed by design. DC Output DC current capacity (IMP) Low-Power Compliance The PXI-1033 is designed for portable applications and surpasses the power requirements outlined in the PXI specification for low-power chassis. As a result, depending on some of the modules used, power budgeting may be required. Overvoltage Protection Chassis Cooling HIGH/AUTO speed selector Power supply cooling Environmental For indoor use only. PXI Chassis with Integrated MXI-Express Remote Controller BUY ONLINE at ni.com or CALL (800) 813 3693 (U.S.) Voltage (V) Current (A) 0 to 50 °C +3.3 10 +5 15 +12 2 .5 -12 0.8 Nominal Voltage (V) Active Range (V) Minimum Maximum +3.3 3.76 4.3 +5 5.74 7.0 +12 13.4 15.6

meets MIL-PRF-28800F Class 3 low temperature limit and high temperature limit) Storage Environment meets MIL-PRF-28800F Class 3 limits) Backplane mechanical packaging. Compliant with PXI Hardware Specification, Revision 2.2. Accepts both PXI and CompactPCI 3U modules. V(I/O) 1 V(I/O) is connected to the +5 V DC power plane, so the same specifications apply to V(I/O) and +5 V.

10 MHz System Reference Clock (10 MHz REF)

Overall dimensions (standard chassis) Note: 12.7 mm (0.50 in.) is added to height when feet are installed. polyester urethane powder paint Shock and Vibration meets MIL-PRF-28800F Class 2 limits) Random Vibration (tested in accordance with IEC-60068-2-64; nonoperating test profile exceeds the requirements of MIL-PRF-28800F, Class 3) Acoustic Emissions Sound Pressure Level (at operator’s position) PXI-1033 (tested in accordance with ISO 7779; meets MIL-PRF-28800F requirements) PXI Chassis with Integrated MXI-Express Remote Controller BUY ONLINE at ni.com or CALL (800) 813 3693 (U.S.)

(tested in accordance with ISO 7779) Safety and Compliance Safety This product is designed to meet the requirements of the following standards of safety for electrical equipment for measurement, control, and laboratory use:

  • EN 61010-1, IEC 61010-1
  • UL 61010-1, CAN/CSA-C22.2 No. 61010-1 Note: For UL and other safety certifications, refer to the product label, or visit ni.com/certification, search by model number or product line, and click the appropriate link in the Certification column. Electromagnetic Compatibility This product is designed to meet the requirements of the following standards of EMC for electrical equipment for measurement, control, and laboratory use:
  • EN 61326 EMC requirements; Minimum Immunity
  • EN 55011 Emissions; Group 1, Class A
  • CE, C-Tick, ICES, and FCC Part 15 Emissions; Class A Note: For EMC compliance, operate this device accor ding to printed documentation. CE Compliance This product meets the essential requirements of applicable European Directives, as amended for CE marking, as follows:
  • 73/23/EEC; Low-Voltage Directive (safety)
  • 89/336/EEC; Electromagnetic Compatibility Directive (EMC) Note: Refer to the Declaration of Conformity (DoC) for this product for any additional regulatory compliance information. To obtain the DoC for this product, visit ni.com/certification, search by model number or product line, and click the appropriate link in the Certification column. Waste Electrical and Electronic Equipment (WEEE) EU Customers: At the end of their life cycle, all products must be sent to a WEEE recycling center. For more information about WEEE recycling centers and National Instruments WEEE initiatives, visit ni.com/environment/weee.htm. PXI Chassis with Integrated MXI-Express Remote Controller BUY ONLINE at ni.com or CALL (800) 813 3693 (U.S.)

NI has the services and support to meet your needs around the globe and through the application life cycle – from planning and development through deployment and ongoing maintenance. We offer services and service levels to meet customer requirements in research, design, validation, and manufacturing. Visit ni.com/services. Training and Certification NI training is the fastest, most certain route to productivity with our products. NI training can shorten your learning curve, save development time, and reduce maintenance costs over the application life cycle. We schedule instructor-led courses in cities worldwide, or we can hold a course at your facility. We also offer a professional certification program that identifies individuals who have high levels of skill and knowledge on using NI products. Visit ni.com/training. Professional Services Our Professional Services Team is composed of NI applications engineers, NI Consulting Services, and a worldwide National Instruments Alliance Partner program of more than 600 independent consultants and integrators. Services range from start-up assistance to turnkey system integration. Visit ni.com/alliance. OEM Support We offer design-in consulting and product integration assistance if you want to use our products for OEM applications. For information about special pricing and services for OEM customers, visit ni.com/oem. Local Sales and Technical Support In offices worldwide, our staff is local to the country, giving you access to engineers who speak your language. NI delivers industry-leading technical support through online knowledge bases, our applications engineers, and access to 14,000 measurement and automation professionals within NI Developer Exchange forums. Find immediate answers to your questions at ni.com/support. We also offer service programs that provide automatic upgrades to your application development environment and higher levels of technical support. Visit ni.com/ssp. Hardware Services NI Factory Installation Services NI Factory Installation Services (FIS) is the fastest and easiest way to use your PXI or PXI/SCXI combination systems right out of the box. Trained NI technicians install the software and hardware and configure the system to your specifications. NI extends the standard warranty by one year on hardware components (controllers, chassis, modules) purchased with FIS. To use FIS, simply configure your system online with ni.com/pxiadvisor. Calibration Services NI recognizes the need to maintain properly calibrated devices for high-accuracy measurements. We provide manual calibration procedures, services to recalibrate your products, and automated calibration software specifically designed for use by metrology laboratories. Visit ni.com/calibration. Repair and Extended Warranty NI provides complete repair services for our products. Express repair and advance replacement services are also available. We offer extended warranties to help you meet project life-cycle requirements. Visit ni.com/services. SERVICE NEEDS © 2006 National Instruments Corporation. All rights reserved. MXI, National Instruments, National Instruments Alliance Partner, NI, ni.com, and SCXI are trademarks of National Instr uments. Other pr oduct and company names listed are trademarks or trade names of their respective companies. A National Instr uments Alliance Par tner is a business entity independent fr om NI and has no agency , partnership, or joint-venture relationship with NI. National Instruments • info@ni.com ni.com • (800) 813 3693 *351393A-01* 351393A-01 2006-7550-501-101-D