DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
Features
- PXI TM -5 PXI Express hardware specification Rev.1.0 compliant
- 18-slot PXI Express chassis with one system slot, one system timing slot, 10 hybrid peripheral slots, and 6 PXI Express peripheral slots
- Configurable PCIe switch fabric, can be configured as four-link, two-link, PXI Express chassis
- Up to 8 GB/s system bandwidth
- Up to 4 GB/s peripheral bandwidth for dedicated slots
- 0°C to 55°C extended operating temperature range
- Intelligent chassis management
- Automatic fan speed control
- Chassis status monitoring and reporting
- Remote chassis power on/off control
- BNC connectors for 10 MHz clock input/output
- Maximum total usable power of 1120 W under 55°C
- Power, temperature, and fan monitoring LEDs
Ordering Information
- PXES-2780 3U 18-slot PXI Express chassis with universal AC power supply Optional Accessories
- PXES-2780 Rack-mount Kit Flexible rack-mount kit for PXES-2780 Recommended System Controller PXES-2780 PXIe-3975/3985 √ Introduction The ADLINK PXES-2780 is an 18-slot PXI Express chassis, compliant with PXI Express and cPCI Express specifications and offering one system slot, one system timing slot, ten hybrid peripheral slots, and six PXI Express peripheral slots for a wide variety of testing and measurement applications requiring enhanced bandwidth. The PXES-2780 provides a configurable PCIe switch fabric and is configurable in two-link, and four-link PXI express deployments, with 8 GB/s system bandwidth and up to 4 GB/s slot bandwidth for dedicated peripheral slots, thanks to PCIe gen2 signaling technology. The PXES-2780 implements a smart system monitoring controller, reporting full chassis status, including fan speed, system voltages, and internal temperature. Equipped with an industrial grade AC power supply, the PXES-2780 provides 800 W under 55°C, and superior cooling capacity, from three 120 mm fans on the rear of the chassis, and two BNC connectors for 10 MHz clock input/output on the rear panel increase chassis flexibility, enabling synchronization with supplementary devices. All in all, PXES-2780 is a superior PXI Express platform choice for testing and measurement requirements.
- Configurable PCIe Switch Fabric The PXES-2780 provides a configurable PCIe switch fabric and is configurable in two-link x8, and four-link x4 PXI express deployments, allowing users to fully utilize the PCIe gen2 bandwidth for high-bandwidth applications.
- Hybrid Peripheral Slot Design The ADLINK PXES-2780 features 10 hybrid peripheral slots, with PXI Express, cPCI Express, PXI, and CompactPCI modules compatible with every hybrid slot.
- Intelligent Chassis Management The PXES-2780’s built-in system monitoring controller monitors and manages full chassis status, including internal temperature, fan speed, and DC voltages, with monitored data accessible with the embedded controller or remote PC via standard RS-232 connector.
- Innovative Cooling The ADLINK PXES-2780 features an innovative heat dissipation solution, with three 185.9CFM cooling fans in the rear section of the chassis drawing cool air through lower apertures, then exhausting through the back. This design normalizes airflow for each PXI slot, delivering exceptional cooling. When installed in a rack, the cooling design minimizes intake of hot air from the rear side, separating airflow for modules and power supplies, while isolating source (fan) noise from modules and maintaining a steady internal temperature. Notes: 1. ADLINK’s PXI Express chassis accepts hybrid slot-compatible PXI-5 modules (with XJ4 connector). Legacy PXI-1 boards (with J2 connector) need to be upgraded to hybrid slot-compatible PXI modules. A detailed list of ADLINK PXI hybrid slot-compatible modules is available online at: http://www.adlinktech.com/PXI/pxi-breakthrough-bandwidth.php#FAQ 2. Contact your ADLINK sales representative for assistance in upgrading ADLINK legacy PXI modules. If the PXI modules were purchased from a third party, please contact the original vendor. Configurable PCIe Switch Fabric
4 Links x4
2 Links x8 PCIe/PCI
www.adlinktech.com All products and company name listed are trademarks or trade names of their respective companies. Updated Oct. 14, 2019. ©2019 ADLINK Technology, Inc. All Rights Reserved. All specifications are subject to change without further notice.
10 MHz Ref clock
PXES-2780 Hybrid Peripheral SlotsPXES-2780 Front View PXES-2780 Back View Inhibit Enable/Disable Switch & Power rails monitoring port Product Illustration Specifications
- Power Supply AC Input Input voltage range: 100 to 240 VAC Input voltage frequency: 50 to 60 Hz DC Output Maximum total usable power is 1120 W with 240VAC or 840 W with 110VAC
- Bus Interface Four-link/ Two-link/ capacity PXI Express chassis Up to 8 GB/s system bandwidth Up to 4 GB/s peripheral bandwidth for dedicated slots
- IO/Switch on Rear Panel BNC connectors for 10MHz clock input/output Fan speed selector switch Inhibit mode selector switch D-SUB9 connector for voltage monitoring and remote inhibit D-SUB9 connector for remote monitoring
- Cooling Fans: 3 x 185.9 CFM fans, filtered Per-slot cooling capacity: 38.2 W
- Physical Number of slots 1 system slot + 1 system timing slot + 10 hybrid peripheral slots + 6 PXI Express peripheral slots Dimensions Weight: 11.9 kg (26.2 lbs)
- Acoustic Emission Sound Pressure Level (dBA) Auto fan (up to 25 °C ambient): 46.3 dBA High fan: 64.5 dBA Sound Power (dBA) Auto fan (up to 25 °C ambient): 56.0 dBA High fan: 76.0 dBA * Tested in accordance with ISO 7779
- Operating Environment Ambient temperature: 0°C to 55°C (32˚F to 131˚F ) Relative humidity: 10% to 90%, non-condensing
- Storage Environment Ambient temperature: -40~71°C (-40~158°F) Relative humidity: 10% to 90%, non-condensing
- Shock and Vibration Functional shock: 30 G, half-sine, 11 ms pulse duration Random vibration Operating: 5 to 500 Hz, 0.3 Grms, 3 axes Non-operating: 5 to 500 Hz, 2.46 Grms, 3 axes
- Emissions Compliance EN 61326-1 FCC Class A
- CE Compliance Safety: EN 61010-1 Immunity: EN 61326-1 VDC Maximum Load Regulation Maximum Ripple & Noise +5V 36A ±3% 50 mV +12V 84A ±3% 50 mV +3.3V 80A ±3% 50 mV -12V 2.5A ±3% 50 mV