PX119 OMEGA | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 1
Technical content
15 to 5000 psi, 1 to 345 bar 4 to 20 mA Output U Low Cost U Compact Size U 0.50% BFSL Accuracy U All Stainless Steel Body PX119, both models shown smaller than actual size. mini DIN style (connector included). The PX119 pressure transmitter series is ideally suited for material handling, industrial and mobile equipment applications where space constraints require a small body size. The body is machined from a single piece of stainless steel to provide added protection for the internal electronics. A piezoresistive ceramic sensor along with ASIC signal conditioning provide an excellent thermally compensated output. Specifications Accuracy: 0.50% BFSL Accuracy Pressure Range: 15 to 5000 psi (345 bar) Output/Supply Voltage: 4 to 20 mA: 8 to 30 Vdc Output Connections: DIN 43650C (mini DIN) Output Wiring: Pin 1: Supply +, Pin 2: Supply - Long Term Drift: <0.3% FS @ 25°C (77°F) Thermal Error: 7.5 psi ≥ 100 psi: 0.01% FS/°F (0.018% FS/°C) 100 psi > 400 psi: 0.009% FS/°F (0.016% FS/°C) 400 psi ≥ 1000 psi: 0.011% FS/°F (0.019% FS/°C) 1000 psi > 3000 psi: 0.012% FS/°F (0.021% FS/°C) 3000 psi ≥ 5000 psi: 0.018% FS/°F (0.028% FS/°C) Compensated Temperature: 0 to 85°C (32 to 185°F) Operating Temperatures: -40 to 135°C (-40 to 257°F) Process Connection: ¼ NPT male Construction: 304 SS Wetted Materials: 304 SS and Ceramic Al 2O3, NBR Standard Vibration: 10 g (20 to 2000 Hz) for <58 psi (4 bar); 20 g (20 to 500 Hz) for ranges >58 psi (4 bar) Protection: Overvoltage, short circuit, reverse polarity Response Time: 1 ms Ingress Protection: IP65 Weight: 70 g (0.15 lb) Model No. Description CA-319-4PC24-XXX-WP Vented cable used for PX119 ≤100 psig, terminated in a clean dry area that is open to atmosphere for correct operation* CA-319-4PC24-XXX Standard cable for PX119 >100 psig and all absolute ranges, terminated in a dry location or sealed to prevent water from getting into the cable/sensor* DP8PT PLATINUM™ Series 1⁄8 DIN 4-digit single display panel meter To Order Ranges % Proof (FS) % Burst (FS) mini DIN Connectionpsi bar Absolute Pressure 0 to 15 0 to 1 193.4% 386.7% PX119-015AI 0 to 30 0 to 2.1 193.4% 241.7% PX119-030AI 0 to 100 0 to 6.9 290.1% 362.6% PX119-100AI 0 to 150 0 to 10.3 193.4% 241.7% PX119-150AI 0 to 300 0 to 21 193.4% 241.7% PX119-300AI 0 to 600 0 to 42 241.7% 290.1% PX119-600AI 0 to 1000 0 to 69 290.1% 362.6% PX119-1KAI 0 to 1500 0 to 103 193.4% 241.7% PX119-1.5KAI 0 to 3000 0 to 207 193.4% 241.7% PX119-3KAI 0 to 5000 0 to 345 188.5% 188.5% PX119-5KAI Gage Pressure 0 to 15 0 to 1 193.4% 386.7% PX119-015GI 0 to 30 0 to 2.1 193.4% 241.7% PX119-030GI 0 to 100 0 to 6.9 290.1% 507.6% PX119-100GI 0 to 150 0 to 10.3 193.4% 338.4% PX119-150GI 0 to 300 0 to 21 193.4% 338.4% PX119-300GI 0 to 600 0 to 42 241.7% 362.6% PX119-600GI 0 to 1000 0 to 69 290.1% 362.6% PX119-1KGI 0 to 1500 0 to 103 193.4% 241.7% PX119-1.5KGI 0 to 3000 0 to 207 193.4% 217.5% PX119-3KGI 0 to 5000 0 to 345 188.5% 188.5% PX119-5KGI output and mini DIN termination. PX119-015AI, 15 psi absolute pressure transmitter with 4 to 20 mA output and mini DIN termination. T200 / T201 [2.6] [1.18] 23.5 [ø0.93] [0.94] TM Dimensions: mm (inches) ø = Diameter Accessories *All PX119 are vented through a hole in the connector and through the mating connector. OMEGA recommends purchase and use of ready-made Cable Assemblies using part # structure “CA-319-4PC24-XXX-WP” (and non-WP version) as shown above, where “XXX” is the length in feet of the desired cable (e.g. “030” stands for 30 ft).