PX1004-1 RFM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

www.RFM.com E-mail: info@rfm.com Page 1 of 5 ©2010 by RF Monolithics, Inc. PX1004-1 - 7/6/10

Electrical Characteristics

Characteristic Sym Notes Min Typ Max Units Nominal Center Frequency fC 1

82.20 MHz

Passband Insertion Loss at fc IL 3.0 5.5 dB 3 dB Passband BW3 1, 2 ±25 ±42 kHz Amplitude Ripple over fc ±15 kHz 1.0 dBP-P Group Delay Variation over fc ±17 kHz GDV 6.0 µsP-P Third-Order Intermod. for -20 dBm tones at fc ±100 & 200 kHz -95 dBm Rejection fc ±100 kHz 1, 2, 3 11 16 dBfc -1500 kHz to fc -1600 kHz 65 Ultimate 65 Operating Temperature Range TA 1- 2 0 +70 °C Impedance Matching to 50 Ω unbalanced External L-C Case Style SM13365-12 13.3 X 6.5 mm Nominal Footprint Lid Symbolization (YY=year, WW=week) See note 4 RFM PX1004-1 YYWW SM13365-12

  • Low Insertion Loss  Excellent Selectivity  Hermetic 13.3 X 6.5 mm Surface-mount Case  Single-ended Input and Output  Complies with Directive 2002/95/EC (RoHS) Absolute Maximum Ratings Rating Value Units Maximum Incident Power in Passband +10 dBm Maximum DC Voltage Between any 2 Terminals 30 VDC Storage Temperature Range -40 to +85 °C Suitable for Lead-free Soldering - Maximum Soldering Profile 260°C for 30 s

82.2 MHz

  1. Unless noted otherwise, all specifications apply over the operating temperature range with filter soldered to the specified demonstration board with impedance matching to 50 Ω and measured with 50 Ω network analyzer. 2. Unless noted otherwise, all frequency specifications are referenced to the nom- inal center frequency, fc. 3. Rejection is measured as attenuation below the minimum IL point in the pass- band. Rejection in final user application is dependent on PCB layout and exter- nal impedance matching design. See Application Note No. 42 for details. 4. "LRIP" or "L" after the part number indicates "low rate initial production" and "ENG" or "E" indicates "engineering prototypes." 5. The design, manufacturing process, and specifications of this filter are subject to change. 6. Either Port 1 or Port 2 may be used for either input or output in the design. However, impedances and impedance matching may vary between Port 1 and Port 2, so that the filter must always be installed in one direction per the circuit design. 7. US and international patents may apply. 8. RFM, stylized RFM logo, and RF Monolithics, Inc. are registered trademarks of RF Monolithics, Inc. 9. Electrostatic Sensitive Device. Observe precautions for handling. Notes: Connection Terminals Port 1Hot 2 Port 1 Gnd Return 3 Port 2 Hot 8 Port 2 Gnd Return 9 Case Ground All Others Electrical Connections Pb

82.2 MHz SAW Filter

www.RFM.com E-mail: info@rfm.com Page 2 of 5 ©2010 by RF Monolithics, Inc. PX1004-1 - 7/6/10 CH1 S2 1 L OG 10 dB/ REF -4.46 1 dB CENTR 82 . 200 MHz SPAN . 500 M Hz C CH2 S21 LOG 10 dB/ REF -4.655 dB CENTER 82 . 200 000 MHz SPAN 4. 000 000 MHz Cor CH3 S21 DEL 1 us/ RE F 12.14 us CENTR 82 . 200 MHz SPAN . 500 MHz C Smo

12 May 2010 08:54:27

1 : 0 . 0000 dB 0 . 000 000 M Hz Max RE F=1 CH1 Markers BW : . 077195 MHz cent : 82 . 195848 MHz Q: 1064 . 8 1_ loss : -4 . 4410 dB 1 : 0. 0000 dB 0. 000 000 MHz REF=1 CH 2 Markers 2:- 7 3 .7 5 6 d B -1 . 50000 MHz 3:- 6 7 .0 3 9 d B -1 . 60000 MHz 4:- 2 8 .9 4 2 d B -100 . 000 kHz 5:- 3 3 .8 8 9 d B 100 . 000 kHz 3 : 1. 0290 us . 034 000 MH z REF=2 CH 3 Markers mean : 10 . 307 us s . dev : 533 . 58 ns p- p : 1. 96 80 u s PX1004-1 V2BW+5KHZ 11000A Full Full Amplitude and Group Delay Plots

www.RFM.com E-mail: info@rfm.com Page 3 of 5 ©2010 by RF Monolithics, Inc. PX1004-1 - 7/6/10 CH1 S11 1 U FS CENTR 82 . 200 MHz SPAN . 250 MHz C CH2 S21 LOG 1 dB/ REF -4.44 dB CENTER 82 . 200 000 MHz SPAN . 250 000 MHz C CH3 S22 1 U FS CENTR 82 . 200 MHz SPAN . 250 MHz C

12 May 2010 08:56:53

1 : 21 . 953 -915 . 04 m 2 . 1160 nF 82 . 200 000 MHz 3 : - . 20880 dB . 030 000 MHz REF=2 CH2 Markers mean : -4 . 6026 dB s . dev : . 05030 dB p-p : . 20880 dB 1: 2 5 . 5 5 4 -12 . 505 154 . 83 pF 82 . 200 000 M Hz PX1004-1 V 2BW+5KHZ 11000A Full Full PX1004-1 2.0 PF 470 NH 470 NH 2.7 PF Input Output Input/Output Impedance and Passband Amplitude Plots Filter Test Circuit

www.RFM.com E-mail: info@rfm.com Page 4 of 5 ©2010 by RF Monolithics, Inc. PX1004-1 - 7/6/10 Case Dimensions Dimension mm Inches Min Nom Max Min Nom Max C 1.91 2.00 0.075 0.079 D 1.50 0.059 E 0.79 0.031 H 1.0 0.039 P 2.54 0.100 SM13365-12 Ceramic 12-Terminal Surface-Mount Case 13.3 x 6.5 mm Nominal Footprint Materials Solder Pad Plating 0.3 to 1.0 µm Gold over 1.27 to 8.89 µm Nickel Lid Plating 2.0 to 3.0 µm Nickel Body Al2O3 Ceramic Pb Free Electrical Connections Connection Terminals Port 1 Input 2 Return 3 Port 2 Output 8 Return 9 Ground All others Single-ended Operation Return is ground C H P (8 Places) E (10 Places) DB A 9 8 TOP VIEW BOTTOM VIEW 8 9

www.RFM.com E-mail: info@rfm.com Page 5 of 5 ©2010 by RF Monolithics, Inc. PX1004-1 - 7/6/10 Tape and Reel Specifications Quantity Per Reel 1000 USER DIRECTION OF FEED COMPONENT ORIENTATION and DIMENSIONS Carrier Tape Dimensions Ao 7.0 mm Bo 13.8 mm Ko 2.0 mm Pitch 12.0 mm W 24.0 mm PIN #1 See Detail "A" 13.0 20.22.0 12.0 100 REF. "B" REF. 21.0 254 24.4