PX1002 RFM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 10

Technical content

RF Monolithics, Inc. Phone: (972) 233-2903 Fax: (972) 387-8148 E-mail: info@rfm.com RFM Europe Phone: 44 1963 251383 Fax: 44 1963 251510 http://www.rfm.com ©1999 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc. PX1002 112904

Electrical Characteristics

Characteristic Sym Notes Min Typ Max Units Nominal Center Frequency fC 1

86.850 MHz

Passband Insertion Loss at fc IL 3 4.0 dB 3 dB Passband BW 3 1, 2 ±12 ±25 kHz Amplitude Ripple over fc ±15 kHz 1.0 dB P-P Group Delay Variation over fc ±10 kHz GDV 6.0 µs P-P Third-Order Intermod. for -20 dBm tones at fc ±60 & 120 kHz -95 dBm Rejection fc ±60 kHz 1, 2, 3 11 16 dBfc -880 kHz to fc -940 kHz 65 Ultimate 65 Operating Temperature Range T A 1 -20 +70 °C Impedance Matching to 50 Ω unbalanced External L-C Case Style SM13365-12 13.3 X 6.5 mm Nominal Footprint Lid Symbolization (YY=year, WW=week) See note 4 RFM PX1002 YYWW SM13365-12

  • Designed for TDMA IS-54 Receiver IF Applications
  • Low Insertion Loss
  • Excellent Selectivity
  • Hermetic 13.3 X 6.5 mm Surface-Mount Case
  • Unbalanced Input and Output
  • Complies with Directive 2002/95/EC (RoHS) Absolute Maximum Ratings Rating Value Units Maximum Incident Power in Passband +10 dBm Max. DC voltage between any 2 terminals 30 VDC Storage Temperature Range -40 to +85 °C Suitable for lead-free soldering - Max Soldering Profile 260°C for 30 s

86.85 MHz

  1. Unless noted otherwise, all specifications apply over the operating temperature range with filter soldered to the specified demonstration board with impedance matching to 50 Ω and measured with 50 Ω network analyzer. 2. Unless noted otherwise, all frequency specifications are referenced to the nom- inal center frequency, fc. 3. Rejection is measured as attenuation below the minimum IL point in the pass- band. Rejection in final user application is dependent on PCB layout and exter- nal impedance matching design. See Application Note No. 42 for details. 4. "LRIP" or "L" after the part number indicates "low rate initial production" and "ENG" or "E" indicates "engineering prototypes." 5. The design, manufacturing process, and specifications of this filter are subject to change. 6. Either Port 1 or Port 2 may be used for either input or output in the design. However, impedances and impedance matching may vary between Port 1 and Port 2, so that the filter must always be installed in one direction per the circuit design. 7. US and international patents may apply. 8. RFM, stylized RFM logo, and RF Monolithics, Inc. are registered trademarks of RF Monolithics, Inc. 9. ©Copyright 1999, RF Monolithics Inc. 10. Electrostatic Sensitive Device. Observe precautions for handling. Notes: Connection Terminals Port 1Hot 2 Port 1 Gnd Return 3 Port 2 Hot 8 Port 2 Gnd Return 9 Case Ground All Others Electrical Connections Pb

86.85 MHz SAW Filter

RF Monolithics, Inc. Phone: (972) 233-2903 Fax: (972) 387-8148 E-mail: info@rfm.com RFM Europe Phone: 44 1963 251383 Fax: 44 1963 251510 http://www.rfm.com ©1999 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc. PX1002 112904

RF Monolithics, Inc. Phone: (972) 233-2903 Fax: (972) 387-8148 E-mail: info@rfm.com RFM Europe Phone: 44 1963 251383 Fax: 44 1963 251510 http://www.rfm.com ©1999 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc. PX1002 112904 Tape and Reel Specifications Quantity Per Reel

100 Min

1000 Max

COMPONENT ORIENTATION and DIMENSIONS Carrier Tape Dimensions Ao 7.0 mm Bo 13.8 mm Ko 2.0 mm Pitch 12.0 mm W 24.0 mm PIN #1 See Detail "A" 13.0 20.2 2.0 12.0 100 REF."B" REF. 21.0 254 24.4

RF Monolithics, Inc. Phone: (972) 233-2903 Fax: (972) 387-8148 E-mail: info@rfm.com RFM Europe Phone: 44 1963 251383 Fax: 44 1963 251510 http://www.rfm.com ©1999 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc. PX1002 112904 SM13365-12 Case Case Dimensions Dimension mm Inches Min Nom Max Min Nom Max C 1.91 2.00 0.075 0.079 D 1.50 0.059 E 0.79 0.031 H 1.0 0.039 P 2.54 0.100 12-Terminal Ceramic Surface-Mount Case 13.3 x 6.5 mm Nominal Footprint Materials Solder Pad Termination Au plating 30 - 60 uInches (76.2-152 uM) over 80- 200 uInches (203-508 uM) Ni. Lid Fe-Ni-Co Alloy Electroless Nickel Plate (8-11% Phosphorus) 100-200 uInches Thick Body Al 2 O 3 Ceramic Pb Free Electrical Connections Connection Terminals Port 1 Input or Return 2 Return or Input 3 Port 2 Output or Return 8 Return or Output 9 Ground All others Single Ended Operation Return is ground Differential Operation Return is hot C H P (8 Places) E (10 Places) DB A 9 8 TOP VIEW BOTTOM VIEW 8 9