PX10-AF6WP HIROSE | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 8
Technical content
Power Supply Connectors For Industrial Equipment PX Series NEW Pict.-➀ Fig.-➀ Structure prevents mis-insertion As this window is opened, contact section can easily be checked. Since the retainer portion is lowered by onestep, the possibility of spring deformation is minimized even if the lock is released. retainer Wall structure prevents retainer deformationContact spring guard section Applicable Wire Size (AWG No.) Sealing section (3 contacts) 16-18 Reliable terminal structure I Features 1. Power supply connector for high-current: Withstands voltage of 2200V AC max. and 10A/contact (60A/6contacts) of rated current. 2. Housing design prevents incorrect insertion: Opening section is designed to prevent reverse insertion and mating direction is easily checked. Additionally, the opening section is keyed to prevent misalignment of plugs in parallel applications. (See the right Pict. ➀ .) 3. Reduced Size: When compared to traditional products, Hirose’s plug is smaller in size by 65% and the receptacle is smaller by 55%. (For more details, refer to page 2.) 4. Reliable contact structure: ➀ Three point contact ➁ Gold plated contacts (standard) with high-level environmental resistance ➂ Contact spring guard structure ➃ Structure prevents retainer deformation (Refer to the right Fig.➀ .) 5. Easy Cable Assembly: ➀ Use of dedicated crimping tools will make harness work easier.One tool crimps both AWG#16 and AWG#18 wire. ➁ Positive lock can be felt on contact insertion. ➂ Release of contact lock can easily be performed with dedicated jig, which facilitates the wiring modification after assembly. Key Label space Avoid any short between adjacent terminals Two layer structure enables high-density mounting. Shape of opening prevents reverse insertion 99.4
I Material Quality/Processing Parts Contacts Insulator Metal fixture Copper alloy PBT resin(UL94V-0) Copper alloy Gold plating Solder plating Material Finish BComparison In Size With Conventional Equivalent Plug Width Height Depth Width Height Depth 34.2 07.0 23.0 28.0 14.8 27.4 44.94 07.15 22.80 39.40 18.47 27.18 Receptacle PX A company-made
Description
1.contact resistance insulation resistance 3.voltage resistance 10m ø maximum 1000M ø minimum No flashover/dielectric breakdown Measured at 100mA. Measured at DC 500V. AC 2200V for 1 minute. 1000 times of insertion/withdrawal Frequency:10-55Hz(1cycle,5 min.) One-sided amplitude:Test at 0.75mm, 3 directions for 2 hours, respectively Acceleration: 490m/S2 Duration: 11ms Test at sine half-wave, 3 axes, bi-directional three times, respectively. Test the followings for 5 cycles : Temperature: -55/+05~+35/+85/+05~+35ç Time : -30/+10~+15/+30/+10~15Minutes Continuous condition of 40±2çin temperature and 90~95% in humidity for 96 hours. Leave in 5% of salt water for 48 hours. ➀ Contact resistance : 20møor less ➁ No damage, cracks or looseness of parts ➀ No instantaneous electric disconnection of 10 µs or more ➁ Contact resistance : 20møor less ➂ No damage, cracks or looseness of parts ➀ Contact resistance : 20møor less ➁ Insulation resistance : 1000Mø or more ➂ No damage, cracks or looseness of parts ➀ Contact resistance : 20mø or less ➁ Insulation resistance : 1000Mø or more ➂ No damage, cracks or looseness of parts ➀ No heavy corrosion 4.Insertion/Withdrawal life 5.vibration resistance 6.shock resistance 9.Corrosion, salt mist 7.temperature cycle 8.humidity resistance in steady state Specifications Requirements Ratings Temp. Range Voltage Current -55ç~+105ç AC600V 10A For volume ratio, plug is downsized to : nearly 65%; and receptacle : nearly 55%. (mm) Plug Receptacle width R S width depth 3 4 5 6 7 9 10 PX10 11 12 AF6WP A F PX50-AF6S height 12345 depth A AF F A height
BDimensions For Circuit Board Installation(For Your Information)t=1.6~2.4 ✽ Where t=1.6 (Setting value depends on thickness of boards.) BTerminal-To-Terminal Distance Of Board Installed Section G 6position/2row Type PX10 -AF6WP CL236 -0001-0
BDimensions For Circuit Board Installation(For Your Information)t=1.6~2.4 ✽ Where t=1.6 (Setting value depends on thickness of boards.) BTerminal-To-Terminal Distance Of Board Installed Section G 4Position/2 Row Type PX10 -AD4WP CL236 -0005-0 terminal No.1 terminal No.4 terminal No.5 terminal No.8 Label space size 17.2∞10.2 R S 1 4 D 5 6 25.2 3 4 PX10 AD4WP 21.2 14.8 22.8 4.1 8 6.7 4.5 27.4 A AD 3.4 10.2 11.4 3.8 7.3 8.4 terminal No.6 terminal No.5 terminal No.2 terminal No.1 (through-hole) terminal No.8 terminal No.7 terminal No.4 terminal No.3 connector position 10.2 P=3.4 6.7 11.4 P=3.8 8-Ø1.4 (6)(through-hole) 22.8 board end (8) 3.7 R0.75 1.5 π 5.09 5.09
21.5 PX50 --- AD4S 1234A terminal No.1 terminal No.2 terminal No.3 terminal No.4 AD 21.2 27.4 Label space size 11.6∞6.1 (This picture shows the state of cable insertion.)
I Simple-Type Plug Holder Cover G For 6-Position Type BInstallation method diagram G 6-Position Type G 4-Position Type BInstallation status PX -6WS -CV CL236 -0004-8 G For 4-Position Type PX -4WS -CV CL236 -0007-6 A PX- 22.8 10.6 15.9 4WS-CV Label Space Size 17.2∞6.1 D A AD PX50-AD4S (2-layerd) 1234 A PX- 4WS-CV ➂ ➃ <Caution>The holder cover is not a rugged support fixture but only meant for alignment of the plugs. If external force is imposed by pulling of cables, etc. before mating, please bundle all cables together around the connector with union bands, etc.
AWG No. Delivery state Product No. CL No. Packing volume # 16, 18 Reeled Packed PX50-SC-231 PX50-SC-131 CL236-0003-5 CL236-0008-9 1 reel: 5000 cables 1 pack: 100 cables Please order by integral multiple of the packing volume. I Crimping Tool Description Form Product No. CL No. Adaptive terminal Automatic Manual Crimp terminal drawing jig Auto crimper Applicator Hand tool (✽) CM-105 AP105-PX50-3 HT104/PX50-3 PX50-SC-TC CL901-0005-4 CL901-2573-8 CL250-0229-4 CL250-0233-1 PX50-SC-131 PX50-SC-✽31 PX50-SC-231 ✽ For our manual crimping tools, we employ the rotate-replace procedure to use the crimper depending on wire size. Note.) Since manual crimping tool cannot provide fine adjustment of crimp height, please use the proper crimp height of auto crimper in crimping of the wires other than specified ones
I Crimp Terminal Drawing Jig G How To Extract Crimp Terminal PX50 -SC -TC CL250 -0233-1 When the crimp terminal drawing jig is inserted and pushed from the fitting section of a connector as shown below, retainer lock of the terminal will be released. Then please extract the cable. If the retainer is too lowered after extracting terminal, put it in a former position and reinsert. Position and direction of the jig top to be inserted are as shown in the Figures below. Be careful that any mistake will lead to the damage of terminal. <WARNING> ✽ Insert the jig top into the peak of convex section on terminal hole. 5-23,OSAKI 5-CHOME,SHINAGAWA-KU,TOKYO 141-8586,JAPAN PHONE:3-3491-9741 FAX :3-3493-2933 HIROSE ELECTRIC CO.,LTD. CreativeLinks to W orld Electronics The contents of this catalog are current as of April 1999. Contents are subject to change without notice for the purpose of improvements.