DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 8
Technical content
File Name:PWM-120 IoT-SPEC 2021-09-10 Tuya IS 15885(Part 2/Sec13) R-41027766 THOMAS SAMUEL THOMAS SAMUEL ( for PWM-120-12,24 only) except for 12DA type 120W Wireless Lighting Constant Voltage LED Driver Solution PWM-120 IoT Series IP67 User’s Manual
SETUP, RISE TIME Note.2 HOLD UP TIME (Typ.) VOLTAGE RANGE Note.3 FREQUENCY RANGE POWER FACTOR (Typ.) EFFICIENCY (Typ.) AC CURRENT (Typ.) INPUT INRUSH CURRENT (Typ.) LEAKAGE CURRENT WORKING TEMP. WORKING HUMIDITY STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION MTBF DIMENSIONOTHERS NOTE PACKING OVERLOAD OVER VOLTAGE OVER TEMPERATURE 12V 10A 120W up to 4kHz 1000ms,80ms/115VAC or 230VAC for BLE and ; 2000ms,80ms/115VAC or 230VAC for SVATY1 16ms/230VAC or 115VAC 90 ~ 305VAC 127 ~ 431VDC 47 ~ 63Hz PF>0.97/115VAC, PF>0.96/230VAC, PF>0.94/277VAC @ full load (Please refer to "POWER FACTOR (PF) CHARACTERISTIC" section) 87.5% <0.25mA / 277VAC 108 ~ 130% rated output power Hiccup mode, recovers automatically after fault condition is removed 20 ~ 95% RH non-condensing 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes 860.4K hrs min. Telcordia SR-332 (Bellcore) ; 228.7K hrs min. MIL-HDBK-217F (25℃) Shut down o/p voltage, re-power on to recover PWM FREQUENCY (Typ.) ENVIRONMENT FUNCTION PROTECTION Shut down o/p voltage, re-power on to recover 15 ~ 17V 1.3A / 115VAC 0.65A / 230VAC 0.55A / 277VAC PWM-120-12 WITHSTAND VOLTAGE ISOLATION RESISTANCE I/P-O/P:3.75KVAC I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH EMC IMMUNITY EMC EMISSION Note.6 COLD START 60A(twidth=520 s measured at 50% Ipeak) at 230VAC ; Per NEMA 410 μ TOTAL HARMONIC DISTORTION 0.97Kg; 15pcs/15.6Kg/0.87CUFT MAX. NO. of PSUs on 16A CIRCUIT BREAKER 4 units (circuit breaker of type B) / 6 units (circuit breaker of type C) at 230VAC 90% 28 ~ 34V (Please refer to "STATIC CHARACTERISTIC" section) THD< 20%(@load≧60%/115VAC, 230VAC; @load≧75%/277VAC) (Please refer to “TOTAL HARMONIC DISTORTION” section) <1W Tcase=-20 ~ + (Please refer to “ OUTPUT LOAD vs TEMPERATURE” section)90℃ Tcase=+90℃MAX. CASE TEMP. Bluetooth low energy 2.4GHz protocol 24V 120W PWM-120-24 WIERLESS DISTANCE Up to 20m STANDBY POWER CONSUMPTION File Name:PWM-120 IoT-SPEC 2021-09-10 SAFETY & EMC WIERLESS PROTOCOL SAFETY STANDARDS Note.5 48V 2.5A 120W PWM-120-48 90% 54 ~ 60V DIMMING Note.9 Please refer to “DIMMING OPERATION” section 0 ~ 100% Minimum dimming level:1%,dim to offDIMMING RANGE UL8750( type ”HL” ), CSA C22.2 No. 250.13-12; ENEC BS EN/EN61347-1, BS EN/EN61347-2-13,BS EN/EN62384 independent, IP67,BIS IS15885( for PWM-120-12,24 only), EAC TP TC 004,GB19510.1,GB19510.14 approved; Design refer to BS EN/EN60335-1 Compliance to BS EN/EN55015, BS EN/EN61000-3-2 Class C (@load≧60%) ; BS EN/EN61000-3-3,GB17743 and GB17625.1,EAC TP TC 020 Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11; BS EN/EN61547, light industry level (surge immunity Line-Line 2KV),EAC TP TC 020 120W Wireless Lighting Constant Voltage LED Driver Solution PWM-120 IoT Series
※ Dimming principle for PWM style output PWM-120 ON OFF TON T Output DC current Io=0A Output PWM frequency : up to 4KHz Duty cycle(%) = ×100% TON T ‧Dimming is achieved by varying the duty cycle of the output current. AC/N(Blue) AC/L(Brown) +V(Red) -V(Black) File Name:PWM-120 IoT-SPEC 2021-09-10 AC mains ※Bluetooth control ‧To be used through APP available on Apple Store and Google Play Store for iOS and Android. Search: BLE with Casambi/TY1 with Smart Life/SVA with Silvair Example: The APP for BLE type is “Casambi” The APP for SVA type is “Silvair”The APP for TY1 type is “Smart Life” LED Strip 120W Wireless Lighting Constant Voltage LED Driver Solution PWM-120 IoT Series
■OFFICIAL WEBSITE AND ECOSYSTEM INFORMATION File Name:PWM-120 IoT-SPEC 2021-09-10 The real time Bluetooth IC temperature is shown in the APP. In case it reaches above 72 ºC (equivalent to Tc 85ºC), the driver will be turn off to provide a protection. In case the units is cooled down, it can be manually turn ON and back to normal operation again. NOTE: 1.This software temperature protection is an extra independent function from driver its own hardware over temperature protection(when it is enabled, it needs re-AC power on to recover). 2.In general the software temperature protection is triggered before the hardware one when in over temperature. NOTE: 1.Website: https://www.tuya.com NOTE: 1.Website: https://www.silvair.com 3.Website: https://www.casambi.com 120W Wireless Lighting Constant Voltage LED Driver Solution PWM-120 IoT Series
- 30 0. 35 0. 40 0. 45 0. 50 0. 55 0. 60 0. 65 0. 70 0. 75 0. 80 0. 85 0. 90 0. 95 1. 00 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 277V 230V 115V 90 100 125 135 145 155 165 175 180 200 230 305 100 100 -20 0 15 3004 0 4 5 5 0 6 0 7 0 50 12V only PF LOAD (75W) OUTPUT LOAD vs TEMPERATURE STATIC CHARACTERISTIC TOTAL HARMONIC DISTORTION (THD) AMBIENT TEMPERATURE,Ta ( )℃ LOAD (%) INPUT VOLTAGE (V) 60Hz LOAD (%) (HORIZONTAL) POWER FACTOR (PF) CHARACTERISTIC Tcase ( )℃ LOAD (%) (HORIZONTAL) ※De-rating is needed under low input voltage. EFFICIENCY vs LOAD -20 0 20 45 65 75 85 90 100 EFFICIENCY(%) LOAD THD LOAD ※ Tcase at 80 ℃ 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 277V 230V 115V 10% 15% 20% 25% 30% 50% 60% 70% 80% 90% 100% 277VAC 230VAC 115VAC File Name:PWM-120 IoT-SPEC 2021-09-10 120W Wireless Lighting Constant Voltage LED Driver Solution PWM-120 IoT Series
Tc a s e ( )℃ LIFETIME (Kh) File Name:PWM-120 IoT-SPEC 2021-09-10 Bluetooth mesh LED driver for intelligent lighting Application 120W Wireless Lighting Constant Voltage LED Driver Solution PWM-120 IoT Series
Mechanical Specification Case No. PWM-120 Unit:mm Block Diagram DETECTION DIMMING PWM & PFC CIRCUIT CIRCUIT EMI FILTER RECTIFIERS POWER SWITCHING FILTER RECTIFIERS +V -VI/P CONTROL O.V.P. O.L.P. PFC CIRCUIT PFC fosc : 50~120KHz PWM fosc : 60~130KHz File Name:PWM-120 IoT-SPEC 2021-09-10 AC/N(Blue) AC/L(Brown) 37.5 191300 20± 300 20± T case 31.5 95.5tc ‧ : Max. Case Temperature﹤90℃tc +V(Red) -V(Black) 50±3 SJOW 17AWG×2C 50±3 2-ψ4.5 &H05RN-F 1.0mm SJOW 17AWG×2C 2 &05RN-F 2×1.0mm any material that stops RF signal MCU 120W Wireless Lighting Constant Voltage LED Driver Solution PWM-120 IoT Series
AC/L(BROWN) AC/N(BLUE) ◎Cautions Before commencing any installation or maintenance work, please disconnect the power supply from the utility. Ensure‧ that it cannot be re-connected inadvertently! Keep proper ventilation around the unit and do not stack any object on it. Also a 10-15 cm clearance must be kept when ‧ the adjacent device is a heat source. Mounting orientations other than standard orientation or operate under high ambient temperature may increase the ‧ internal component temperature and will require a de-rating in output current. Current rating of an approved primary /secondary cable should be greater than or equal to that of the unit. Please refer ‧ to its specification. For LED drivers with waterproof connectors, verify that the linkage between the unit and the lighting fixture is ‧ tight so that water cannot intrude into the system. Tc max. is identified on the product label. Please make sure that temperature of Tc point will not exceed limit.‧ ‧Suitable for indoor use or outdoor use without direct sunlight exposure. Please avoid immerse in the water over 30 minutes. ‧The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again. +V(RED) -V(BLACK) LED Strip or constant voltage LED bulb File Name:PWM-120 IoT-SPEC 2021-09-10 Recommend Mounting Direction 120W Wireless Lighting Constant Voltage LED Driver Solution PWM-120 IoT Series