PW116 SLPOWER | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

7105 Northland Terrace | Minneapolis, Minnesota 55428 | USATEL (1) 763-592-1900

FAX (1) 763-592-1911 | E-MAIL info@aultinc.com | WEB www.aultinc.com © Copyright 2005 Ault Inc. PW116 SWITCH-MODE POWER SUPPLY

  • 100-250 VAC Universal Input
  • Desktop Style
  • Single Output to 90W
  • Regulated Output With Low Ripple
  • Meets Safety Agency Requirements
  • Complies With EMI/RFI Regulations
  • CE Compliant
  • Impact Resistant Polycarbonate Enclosure
  • Private Label Marking Available
  • 3 Year Warranty
  • Modified and Custom Designs Also Available PW116 ITE 60-90 WATT SERIES #3 Connector pictured PW116XA05XX_01 5V 12.0 60.0 PW116XA06XX_01 6V 10.0 60.0 PW116XA09XX_01 9V 7.80 70.0 PW116XA12XX_01 12V 6.67 80.0 PW116XA14XX_01 13.5V 6.15 83.0 PW116XA15XX_01 15V 6.00 90.0 PW116XA16XX_01 16V 5.60 90.0 PW116XA1803_01 18V 5.00 90.0 PW116XA2403_01 24V 3.75 90.0 PW116XA4803_01 48V 1.87 90.0 PW116 X A 05 XX __ 01 Product Manufacturing D esign Voltage Connector Input Denotes Family Location Revision DC #51 - Standard Configuration/ standard Name (volume Changes 16V and Model Type or custom dependent) under; #3 - (see pg. 2) requirements Standard 18V and over Voltage Max Max Ault Part No. DC Amps Watts Ault Part No. Key PW116

FAX (1) 763-592-1911 | E-MAIL info@aultinc.com | WEB www.aultinc.com © Copyright 2005 Ault Inc. In case IEC320 type: F=Class I C14 inlet Q=Class II C18 inlet Specify the Input Configuration Code in your order. ConnectorsInput Configuration PW116 ITE 60-90 WATT SERIES IEC320 w/ground C14 (F) IEC320 w/o ground C18 (Q) Electrical Topology Switching - Fixed frequency 100KHz Efficiency Up to 89% EMI Complies with EMC Directives CE CE Compliant MTBF 100,000 Calculated Hours Minimum Environmental Operating Temperature 0º to 40º C with no derating Storage Temperature -30º to +85º C Relative Humidity 5% to 95% non-condensing Altitude 0-10,000 feet Cooling Convectional - non vented case Mechanical Case and Dimensions LP7 - Desktop 5.08L x 3.05W x 1.67H (in) 129L x 77W x 40H (mm) Case Material 94V0 polycarbonate; black is standard color; other colors available - extra charges may apply Weight 13 ounces, 370 grams (excluding cord) Input Voltage 100-250 VAC -10%, +6% Line Frequency 47 - 63 Hz Current 2.0A max. at 90 VAC input Protection Internal primary current fuse, Inrush limiting Power Factor Correction Complies with EN61000-3-2 and EN61000-3-3 (active) Output Combined Line and Load ±1% excluding cord Voltage Regulation Ripple 1% V p-p max Transient Response 0.5 msec. for 50% load change typical Holdup Time 16 msec min. over entire input range Protection Foldback overcurrent protection Short circuit protection Cord and Connector 5V and 6V:6 ft, 6 conductor, 18 AWG, Ault #51 connector. Pinout: Pins 1, 2, 3 = +V; 4, 5 and 6 = common. 9V, 12V, 13.5V, 15V, 16V:6 ft, 4 conductor, 18 AWG, Ault #51 connector. Pinout: Pins 1,4=+V; 3, 6=common. All with overmolded Ferrite core. 18V, 24V, 48V,: 6 ft, 2 conductor, 18 AWG with overmolded Ferrite core, Ault #3 connector, center positive. Safety Approvals Agency Listings cULus60950, TUV/IEC EN60950, Australian, Japanese certification available - extra fees apply