DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

The copyright and authority for the interpretation of the products are reserved by MORNSUN. Specifications subject to change without notice. PV Series A/1-2012 Page 1 of 3 ★INPUT VOLTAGE:1200VDC PV SERIES NEW POWER SOURCES 200- 1200VDC OVERWIDE AND OVERHIGH INPUT VOLTAGE ISOLATION CONVERTER PV series are 200-1200VDC input voltage regulated DC-DC converter. It features ultra-high input voltage, high efficiency, high reliability, it can be widely used in PV power generation and high voltage inverter occasion, provide a stable operating voltage to the load equipment. Its own multiple protection features can enhance the safety performance of the power and load when module work under abnormal conditions. RoHS PRODUCT FEATURES

  • 6:1 ultra-wide input voltage range: 200 ~ 1200VDC
  • Industrial operating temperature: -40 ~ 70℃℃
  • 4000VDC high isolation voltage
  • high efficiency, Low ripple& noise
  • Under input voltage protection (automatic recovery)
  • Over output voltage protection(automatic recovery)
  • Short circuit protection(automatic recovery)
  • Input against reverse protection
  • MTBF>300 K hours
  • High reliability, long life, three years warranty
  • Offer custom products PART NUMBER SYSTEM PV05-27B05 SELECTION GUIDE Output Model Package Input Voltage Range (VDC) Voltage (VDC) Current (mA) Isolation Voltage (VDC) Efficiency (%,Typ) Ripple& noise (Max.) PV05-27B05 5 1000 73 PV10-27B05 5 2000 75 PV10-27B09 9 1111 78 PV10-27B24 74.0x52.0x28.0mm 200～1200 24 420 4000 100mV INTPUT SPECIFICATIONS Input Voltage Range 200～1200VDC Input Current PV05 models PV10 models 200VDC 34mA(Typ.) 66mA (Typ.) 600VDC 12mA (Typ.) 22mA (Typ.) 1200VDC 9mA (Typ.) 14mA (Typ.) Inrush Current 200VDC 8A (Typ.) 600VDC 12A (Typ.) 1200VDC 25A (Typ.) External input fuse 1A Slow blow OUTPUT SPECIFICATIONS Output voltage accuracy ±1% (Typ.) ±2% (Typ.) Line regulation ±0.5% (Typ.) ±1% (Typ.) Load regulation ±0.5% (Typ.) ±1% (Typ.) Ripple& noise(p-p) 20MHz Bandwidth 50mV (Typ.) 100mV (Typ.) Short circuit protection Continuous, and auto resume Under input voltage protection Undervoltage protection range: 175～185V Undervoltage release range:185～195V PV05-27B05 (Feedback-clamp) Voltage limited < 6.5V PV10-27B05 (Feedback-clamp) Voltage limited < 6.5V PV10-27B09 (Feedback-clamp) Voltage limited < 11.5V Over output voltage protection PV10-27B24 (Feedback-clamp) Voltage limited < 27V PV05-27B05 10000μF PV10-27B05 6000μF PV10-27B09 4000μF Max. Capacitive Load(Full load) PV10-27B24 1500μF PV05-27B05 5W Output Power PV10-27B24 10W

The copyright and authority for the interpretation of the products are reserved by MORNSUN. Specifications subject to change without notice. PV Series A/1-2012 Page 2 of 3 COMMON SPECIFICATIONS Temperature ranges Operating Storage Case temperature Temperature Drift -40℃～+70℃ -40℃～+105℃ +90 ℃Max. ±0.02 %/°C（Max.） Humidity 20～95% Delay time 1s (Max.) Cooling Free air convection Hot-plugging No support Isolation Voltage 4000VDC/1Min Isolation Resistance Test at 500VDC > 100 MΩ CE* CISPR22/EN55022 CLASS A EMI RE* CISPR22/EN55022 CLASS A ESD IEC/EN61000-4-2 Contact ±6KV / Air ±8KV perf. Criteria B RS IEC/EN61000-4-3 10V/m perf. Criteria A EFT* IEC/EN61000-4-4 ±4KV perf. Criteria B Surge* IEC/EN61000-4-5 ±2KV/±4KV perf. Criteria B CS IEC/EN61000-4-6 10 Vr.m.s perf. Criteria A PFM IEC/EN61000-4-8 10A/m perf. Criteria A EMC* EMS Voltage dips、short and interruptions immunity IEC/EN61000-4-11 0%-70% perf. Criteria B Case Material Aluminium Install PCB MTBF >300,000h @25°C Weight 190 g Note: 1. * External circuit is required to models, refer to EMC typical application. 2. Test ripple and noise by “parallel cable” method. Test efficiency at normal temperature and input voltage is 200VDC. 3. Unless otherwise specified, all specifications above are measured at rated input voltage and rated output load, TA=25 °C, humidity < 75%; 4. All specifications stated in this datasheet are subject to the above listed models only. For specifications of non-standard models, please contact our technical support team. PARALLEL LINES MEASURE +Vo -Vo FUSE 25.4mm 25.4mm C1 C2 12.7mm +Vin -Vin Copper sheet Connect Oscillograph ProbeLoad Note: C1: 1μF (ceramic capacitor) C2: 10 μF (electrolytic capacitor) INPUT VOLTAGE VS LOAD TEMPERATURE VS LOAD 1000400 1200 100 200 Load(%) InputVoltage(VDC) 600 PV05-27B05、PV10-27B24： PV10-27B05 、PV10-27B09： 100 Load(%) Temperature( )℃ 0-40 7060-20 75 80 InputVV：800-1200 I nputVV：200-800 100 0-40 7060-20 75 Load(%) Temperature( )℃ I nputVV：800-1200 I nputVV：200-800 TYPICAL EFFICIENCY CURVE Efficiency VS Input Voltage Curve 200 400 600 800 1000 1200 Input Voltage(V) Efficiency(%) PV05-27B05 PV10-27B05 PV10-27B09 PV10-27B24 Efficiency VS Output Load curve(Vin=600VDC) 10 20 30 40 50 60 70 80 90 100 Output Current Percent(%) Efficiency(%) PV05-27B05 PV10-27B05 PV10-27B09 PV10-27B24

The copyright and authority for the interpretation of the products are reserved by MORNSUN. Specifications subject to change without notice. PV Series A/1-2012 Page 3 of 3 EMC TYPICAL APPLICATIONS EMI Recommended Circuit： LOAD +OUTPUT -OUTPUT +INPUT -INPUT +Vin -Vin +Vo -Vo R ecommended parameters: ① C2 、C3、C4、C5:47μF/450V ② R2 、R3、R4、R5:1MΩ/2W EMS Recommended Circuit： MOV NTCFUSE C1 C2 TVS RL+ +Vin -Vin +Vo -Vo R ecommended parameters: Vout 5V 24V TVS SMCJ7.0A SMCJ33A C2 224K/50V 224K/50V Note: Output filtering capacitor C1 is electrolytic capacitors, It is recommended to use high frequency and low impedance electrolytic capacitors. For capacitance and current of capacitor please refer to manufacture’s datasheet. Voltage derating of capacitor should be 80%. TVS is a recommended component to protect post-circuits (if converter fails). External input NTC is recommended to use 5D-9. MOV: Varistor, model: 162KD20， it is used to protect the device under surge. Access as needed. OUTLINE DIMENSIONS & RECOMMENDED FOOTPRINT 52.00[2.047] 10.16 [0.400] 30.48 [1.200] 74.00[2.913] 60.96[2.400] 28.00 [1.102] 6.00 [0.236] Ф1.20[0.047] 3,4 +Vin NC +Vo 17.78 [0.700] 22.86 [0.900] -Vin -Vo Ф1.70[0.067] (Main View) Note:grid 2.54*2.54mm. Pin (Bottom View) Function Note: Unit:mm(inch) Pinsection tolerances: 0.10mm [ 0.004inch] General tolerances: 0.50mm [ 0.020inch] PACKAGE DIAGRAM Inner packaging box dimensions:L*W*H=365*350*105mm Package quantity: 24 PCS Outer package box dimensions:L*W*H=390*360*245mm Package quantity: 48 PCS MORNSUN Science & Technology Co.,Ltd. Tel: 86-20-28203030 Fax:86-20-38601272 Http://www.mornsun-power.com