PU150 RSG | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
150 WATT SWITCHING POWER SUPPLIES
DESCRIPTION
The PU150 series comprises single and multiple output models for 150 watts of continuous output power. Auto-ranging input allows them to operate from any line voltage throughout the world without a selector strap. All auxiliary outputs are with magnetic amplifier to keep regulation. The units are constructed on a printed circuit board with a U-bracket for mechanical support and heat sinking, in 1U height
FEATURES
h Short-circuit protection with auto-recovery h Power Fail Detect PFD signal on models With 5V output h 100 č burn-in at full rated load INPUT SPECIFICATIONS Input voltage j 85 to 132 V AC, or 170 to
264 V AC auto-ranging
Input frequency j 47 to 63 Hz Input current j 3.4A rms for 115V AC 2.0A rms for 230V AC Leakage current j 0.4mA max. @ 115V AC, 60Hz 0.8mA max. @ 230V AC, 50Hz PU150 SERIES Safety Standard Approvals j OUTPUT SPECIFICATIONS Output voltage/current j See rating chart Total output power j 150 watts maximum at 30 CFM forced air cooling or 110 watts maximum at convection cooling Ripple and noise j 1čpeak to peak maximum Overvoltage protection j Provided on output #1 only; set at 112-136 čof its nominal output voltage Overcurrent protection j All outputs protected to short circuit conditions Temperature coefficient j All outputs ±0.04 č/Ċ maximum Transient response j Maximum excursion of 4 čor better on all models, recovering to 1 čof final value within 500us after a 25 čstep load change ENVIRONMENTAL SPECIFICATIONS Operating temperature j 0 Ċ to +70 Ċ Storage temperature j -40 Ċ to +85 Ċ Relative humidity j 5 č to 95% non-condensing Deratingj Derate from 100č at +50 Ċ Linearly to 50čat +70Ċ GENERAL SPECIFICATIONS Switching frequency j 120KHz ±15% Efficiency j 70 čtypical on all models Hold-up time j 15 msec minimum at 115V AC Line regulation j ±0.5 čmaximum at full load Inrush current j 20 amps @ 115V AC, or 40 amps @ 230V AC, at 25 Ċ cold start Withstand voltage j 3000V AC from input to output 1500V AC from input to ground 500V AC from output to ground MTBF j 300,000 hours minimum at full load at 25 Ċambient, calculated per MIL-HDBK-217F EMC performance (EN55024) EN55022: Cl ass B conducted, Class B radiated FCC: Class B conducted, Class B radiated VCCI: Class B conducted, Class B radiated EN61000-3-2: Harmonic distorti on, Class A EN61000-3-3: Line fli cker EN61000-4-2: ESD, ± 8KV air and ± 4KV contact EN61000-4-3: Radiated immunity, 3V/m EN61000-4-4: Fast transient/burst, ± 1KV EN61000-4-5: Sur ge, ± 1KV diff., ± 2KV com. EN61000-4-6: C onducted immunity, 3Vrms EN61000-4-8: Magnetic field immunity, 1A/m EN61000-4-11: V olt age dips, 30 č reduction for 500ms and >95 čreduction for 10ms 1-11 UL 60950-1 File No. E137410 CSA C22.2 No. 60950-1 File No. LR93632 TÜV EN60950-1 Certificate No. R9954992 (LVD) RSG ELECTRONIC COMPONENTS RSG Electronic Components GmbH ■ Sprendlinger Landstr. 115 ■ D-63069 Offenbach/Germany Tel. +49 69 984047-0 ■ Fax +49 69 984047-77 ■ info@rsg-electronic.de ■ www.rsg-electronic.de Änderungen vorbehalten / subject to change without notice
AUTORANGING INPUT PU150 SERIES OUTPUT VOLTAGE/CURRENT RATING CHART (1)(2) Output #1 (3) Output #2 Output #3 Output #4 Output PU150-10B 5V 0A 30A 35A 2% (N/A) (N/A) (N/A) 150W PU150-12B 12V 0A 12.5A 14.5A 2% (N /A) (N/A) (N/A) 150W PU150-13B 15V 0A 10A 11.6A 2% (N/A) (N/A) (N/A) 150W PU150-13-1B 18V 0A 8.3V 9.7A 2% (N/A) (N/A) (N/A) 150W PU150-14B 24V 0A 6.3A 7.3A 2% (N/A) (N/A) (N/A) 150W PU150-16B 30V 0A 5.0A 6.0A 2% (N/A) (N/A) (N/A) 150W PU150-17B 36V 0A 4.2A 4.8A 2% (N /A) (N/A) (N/A) 150W PU150-18B 48V 0A 3.1A 3.6A 2% (N /A) (N/A) (N/A) 150W PU150-23B +5V 2.0A 22A 30A 2% +12V 0A 8A 10A 3% (N/A) (N/A) 150W PU150-24B +5V 2.0A 22A 30A 2% +15V 0A 6.4A 8A 3% (N/A) (N/A) 150W PU150-25B +5V 2.0A 22A 30A 2% +24V 0A 4.5A 5A 3% (N/A) (N/A) 150W PU150-30B +5V 2.0A 22A 30A 2% +12V 0A 8A 10A 3% -5V 0A 2.5A 3% (N/A) 150W PU150-31B +5V 2.0A 22A 30A 2% +12V 0A 8A 10A 3% -12V 0A 2.5A 3% (N/A) 150W PU150-32B +5V 2.0A 22A 30A 2% +15V 0A 6.4A 8A 3% -15V 0A 2A 3% (N/A) 150W PU150-33B +5V 2.0A 22A 30A 2% +15V 0A 6.4A 8A 3% -12V 0A 2.5A 3% (N/A) 150W PU150-40B +5V 2.0A 22A 30A 2% +12V 0A 8A 10A 3% -12V 0A 2.5A 3% 5V 0A 5A 5A 3% 150W PU150-41B +5V 2.0A 22A 30A 2% +15V 0A 6.4A 8A 3% -15V 0A 2A 3% 24V 0A 4.5A 5A 3% 150W PU150-42B +5V 2.0A 22A 30A 2% +12V 0A 8A 10A 3% -12V 0A 2.5A 3% 12V 0A 4.5A 5A 3% 150W PU150-44B +5V 2.0A 22A 30A 2% +12V 0A 8A 10A 3% -15V 0A 2A 3% 15V 0A 4A 4.5A 3% 150W PU150-45B +5V 2.0A 22A 30A 2% +12V 0A 8A 10A 3% -12V 0A 2.5A 3% 24V 0A 4.5A 5A 3% 150W Notes: (1) Safety agency approvals are for the above listed models in U-braket format. To order model with a matallic cover, ch ange suffix ”B” to ”C” for enclosed format (mechanical details shown in page7-3). e.g. PU150-45C (2) Output #1 can be built for one-wire current sharing. Add suffix “Z”, e.g. PU150-45B-Z for this requirement. (3) The maximum current of each output shall be derated to 75% if no forced air is provided by user. (4) The output #1 of all multiple output models needs a minimum load of 2A to support the other outputs at their maximum rated loads. MECHANICAL SPECIFICATIONS Single Output models NOTES: 1. Dimensions shown in inch [mm] 2. Tolerance 0.02 [0.5] maximum 3. Input connector P1 mates with Molex housing 09-50-3051 and Molex 2878 series crimp terminal. 4. Output connector P3 mates with Molex housing 09-50-3031 and Molex 2878 series crimp terminal. 5. Connector P4 mates with Molex housing 51110-0851 and pins 50394-8100. 6. Weight: 0.84 kgs (1.86 Lbs.) approx. Multiple Output models NOTES: 1. Dimensions shown in inch [mm] 2. Tolerance 0.02 [0.5] maximum 3. Input connector P1 mates with Molex housing 09-50-3051 and Molex 2878 series crimp terminal. 4. Output connector P3 mates with Molex housing 09-50-3091 and Molex 2878 series crimp terminal. 5. Connector P4 mates with Molex housing 51110-0851 and pins 50394-8100. 6. Weight: 0.84 kgs (1.86 Lbs.) approx. 1-12
AUTORANGING INPUT PU150 SERIES PIN CHART Single Output Models P1 P2 P3 CONN P I N M O D E L 1 2 3 1 2 1 2 3 PU150-10 AC NEUTRAL AC LIVE AC GROUND COM. RET. OUTPUT #1 PFD N.C. COM. RET. PU150-12 PU150-13-1 PU150-16 PU150-18 PU150-13 PU150-14 PU150-17 AC NEUTRAL AC LIVE AC GROUND COM. P4 CONN P I N MODEL 1 2 3 4 5 6 7 8 PU150-10 PU150-13 PU150-14 PU150-17 PU150-12 PU150-13-1 PU150-16 PU150-18 COM RET INHIBIT -Ve INHIBIT SHARE Multiple Output Models P1 P2 P3CONN MODEL PIN 1 2 3 1 2 1 2 3 4 5,6,7 8,9 PU150-23 PU150-25 PU150-24 AC NEUTRAL AC LIVE AC GROUND COM. RET. OUTPUT RET. OUTPUT PU150-30 PU150-32 PU150-31 PU150-33 AC NEUTRAL AC LIVE AC GROUND COM. RET. OUTPUT #1 N.C. N.C. PFD OUTPUT COM. RET. OUTPUT PU150-40 PU150-42 PU150-45 PU150-41 PU150-44 AC NEUTRAL AC LIVE AC GROUND COM. RET. OUTPUT OUTPUT #4 RETURN OUTPUT #4 PFD OUTPUT COM. RET. OUTPUT P4CONN PIN MODEL 1 2 3 4 5 6 7 8 PU150-23 PU150-31 PU150-42 PU150-45 PU150-30 PU150-40 PU150-44 INHIBIT -Ve INHIBIT +Ve +12V (FAN) N.C. COM RET. -SENSE +SENSE CURRENT SHARE PU150-24 PU150-33 PU150-32 PU150-41 INHIBIT -Ve INHIBIT +Ve +15V (FAN) N.C. COM. RET. -SENSE +SENSE CURRENT SHARE PU150-25 INHIBIT -Ve INHIBIT +Ve +24V (FAN) N.C. COM. RET. -SENSE +SENSE CURRENT SHARE 1-13