PTXG1042QRUCRQ1

TXG1041-Q1_V01 TI | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 46

Technical content

TXG104x-Q1 4-bit, ±10V Ground-Level Translator

1 Features

• AEC-Q100 qualified for automotive applications
• Supports DC shifts up to ±10V
• AC Noise Rejection of 20VPP up to 45MHz
• CMTI of 1kV/µs
• Low Prop Delay (<5ns) and Ch-Ch Skew (0.35ns)
• Greater than 250Mbps
• Low power consumption (0.65mA per channel at 1Mbps, 1.8V)
• Fully configurable dual-rail design allows each port to operate from 1.71V to 5.5V
• 4, 2, 1 channel devices with multiple configurations will be available
• Two device variants: – TXG1041-Q1: 3 forward, 1 reverse – TXG1042-Q1: 2 forward, 2 reverse
• Supports VCC disconnect feature (I/Os are forced into high-Z)
• Schmitt-trigger inputs allows for slow and noisy signals
• Inputs with integrated static pull-down resistors prevent channels from floating
• Operating temperature from –40°C to +125°C
• Latch-up performance exceeds 100mA per JESD 78, class II – ESD protection exceeds JESD 22 – 4000V human-body model – 500V charged-device model
• Package options provided: – RUC (X2QFN-14) – DYY (SOT-14) – DBQ (QSOP-16) System #1 System #2INx OUTx VccA GndA VccB GndB TXG VccA GndA VccB GndB Parasi c capacitance/ resistance <10V Simplified Diagram

2 Applications

• Electric Power Steering
• Vehicle Control Unit
• Automotive Display
• Head Unit and Digital Cockpit

3 Description

The TXG104x-Q1 is a 4-bit, fixed direction, non- galvanic based voltage and ground-level translator that can support both logic-level shifting between 1.71V to 5.5V and ground-level shifting up to ±10V. Compared to traditional level shifters, the TXG104x-Q1 family can solve the challenges of voltage translation across different ground levels. The Simplified Diagram shows a common use case where DC shift occurs between GNDA to GNDB due to parasitic resistance or capacitance. VCCA is referenced to GNDA and V CCB is referenced to GNDB. Ax pins are referenced to V CCA logic level while Bx pins are referenced to V CCB logic levels. Both A port and B port can accept voltages from 1.71V to 5.5V. This device includes two enable pins that can place the respective outputs in a high- impedance state when the OE pin is connected to GND or left floating. In the event of input power or signal loss, the output is default low when OE is High (refer to Table 7-1). The leakage between GNDA and GNDB is <30nA when VCC to GND is shorted. The TXG104x-Q1 device helps improve noise immunity and power sequencing across different ground domains while providing low power consumption, latency and channel-to-channel skew. It can supress noise levels of 20V PP up to 45MHz (Figure 7-5 ). This device can support multiple interfaces such as SPI, UART, GPIO, and I2S.

Package Information

NUMBER PACKAGE (1) BODY SIZE (NOM) TXG1041-Q1 TXG1042-Q1 DYY (SOT-14) 4.20mm × 2.00mm DBQ (QSOP-16) 4.90mm x 3.90mm RUC (X2QFN-14) 2.00mm × 2.00mm (1) For all available packages, see the orderable addendum at the end of the data sheet. TXG1041-Q1, TXG1042-Q1 SCES986A – APRIL 2025 – REVISED JANUARY 2026 An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications, intellectual property matters and other important disclaimers. PRODUCTION DATA.

11 Mechanical, Packaging, and Orderable

TXG1041-Q1, TXG1042-Q1 SCES986A – APRIL 2025 – REVISED JANUARY 2026 www.ti.com

2 Submit Document Feedback Copyright © 2026 Texas Instruments Incorporated

Product Folder Links: TXG1041-Q1 TXG1042-Q1

4 Pin Configuration and Functions

OE_A VCCBVCCA B1Y B2Y B3Y OE_B GNDBGNDA Figure 4-1. TXG1041-Q1 RUC Package 14-Pin X2QFN Top View Table 4-1. TXG1041-Q1 RUC Pin Functions PIN I/O DESCRIPTION Name TXG1041-Q1 A1 1 I Input A1. Referenced to VCCA A2 2 I Input A2. Referenced to VCCA A3 3 I Input A3. Referenced to VCCA A4Y 4 O Output A4. Referenced to VCCA B1Y 12 O Output B1. Referenced to VCCB B2Y 11 O Output B2. Referenced to VCCB B3Y 10 O Output B3. Referenced to VCCB B4 9 I Input B4. Referenced to VCCB OE_A 5 I Active-High Output Enable (A side). Pull to GND to place all outputs in high- impedance mode. OE_B 8 I Active-High Output Enable (B side). Pull to GND to place all outputs in high- impedance mode. VCCA 14 — A side supply voltage. 1.71V ≤ VCCA ≤ 5.5V VCCB 13 — B side supply voltage. 1.71V ≤ VCCB ≤ 5.5V GNDA 6 — Ground reference for VCCA GNDB 7 — Ground reference for VCCB www.ti.com TXG1041-Q1, TXG1042-Q1 SCES986A – APRIL 2025 – REVISED JANUARY 2026 Copyright © 2026 Texas Instruments Incorporated Submit Document Feedback 3 Product Folder Links: TXG1041-Q1 TXG1042-Q1

OE_A VCCBVCCA B1Y B2Y OE_B GNDBGNDA Figure 4-2. TXG1042-Q1 RUC Package 14-Pin X2QFN Top View Table 4-2. TXG1042-Q1 RUC Pin Functions PIN I/O DESCRIPTION Name TXG1042-Q1 A1 1 I Input A1. Referenced to VCCA A2 2 I Input A2. Referenced to VCCA A3Y 3 O Output A3. Referenced to VCCA A4Y 4 O Output A4. Referenced to VCCA B1Y 12 O Output B1. Referenced to VCCB B2Y 11 O Output B2. Referenced to VCCB B3 10 I Input B3. Referenced to VCCB B4 9 I Input B4. Referenced to VCCA OE_A 5 I Active-High Output Enable (A side). Pull to GND to place all outputs in high-impedance mode. OE_B 8 I Active-High Output Enable (B side). Pull to GND to place all outputs in high-impedance mode. VCCA 14 — A side supply voltage. 1.71V ≤ VCCA ≤ 5.5V VCCB 13 — B side supply voltage. 1.71V ≤ VCCB ≤ 5.5V GNDA 6 — Ground reference for VCCA GNDB 7 — Ground reference for VCCB TXG1041-Q1, TXG1042-Q1 SCES986A – APRIL 2025 – REVISED JANUARY 2026 www.ti.com

4 Submit Document Feedback Copyright © 2026 Texas Instruments Incorporated

Product Folder Links: TXG1041-Q1 TXG1042-Q1

14 VCCB

6OE_A 9 OE_B 1VCCA 7GNDA 8 GNDB Figure 4-3. TXG1041-Q1 DYY 14-Pin SOT Top View Table 4-3. TXG1041-Q1 DYY Pin Functions PIN I/O DESCRIPTION Name TXG1041-Q1 A1 2 I Input A1. Referenced to VCCA A2 3 I Input A2. Referenced to VCCA A3 4 I Input A3. Referenced to VCCA A4Y 5 O Output A4. Referenced to VCCA B1Y 13 O Output B1. Referenced to VCCB B2Y 12 O Output B2. Referenced to VCCB B3Y 11 O Output B3. Referenced to VCCB B4 10 I Input B4. Referenced to VCCB OE_A 6 I Active-High Output Enable (A side). Pull to GND to place all outputs in high- impedance mode. OE_B 9 I Active-High Output Enable (B side). Pull to GND to place all outputs in high- impedance mode. VCCA 1 — A side supply voltage. 1.71V ≤ VCCA ≤ 5.5V VCCB 14 — B side supply voltage. 1.71V ≤ VCCB ≤ 5.5V GNDA 7 — Ground reference for VCCA GNDB 8 — Ground reference for VCCB www.ti.com TXG1041-Q1, TXG1042-Q1 SCES986A – APRIL 2025 – REVISED JANUARY 2026 Copyright © 2026 Texas Instruments Incorporated Submit Document Feedback 5 Product Folder Links: TXG1041-Q1 TXG1042-Q1

6OE_A 9 OE_B 1VCCA 7GNDA 8 GNDB Figure 4-4. TXG1042-Q1 DYY 14-Pin SOT Top View Table 4-4. TXG1042-Q1 DYY Pin Functions PIN I/O DESCRIPTION Name TXG1042-Q1 A1 2 I Input A1. Referenced to VCCA A2 3 I Input A2. Referenced to VCCA A3Y 4 O Output A3. Referenced to VCCA A4Y 5 O Output A4. Referenced to VCCA B1Y 13 O Output B1. Referenced to VCCB B2Y 12 O Output B2. Referenced to VCCB B3 11 I Input B3. Referenced to VCCB B4 10 I Input B4. Referenced to VCCA OE_A 6 I Active-High Output Enable (A side). Pull to GND to place all outputs in high- impedance mode. OE_B 9 I Active-High Output Enable (B side). Pull to GND to place all outputs in high- impedance mode. VCCA 1 — A side supply voltage. 1.71V ≤ VCCA ≤ 5.5V VCCB 14 — B side supply voltage. 1.71V ≤ VCCB ≤ 5.5V GNDA 7 — Ground reference for VCCA GNDB 8 — Ground reference for VCCB TXG1041-Q1, TXG1042-Q1 SCES986A – APRIL 2025 – REVISED JANUARY 2026 www.ti.com

6 Submit Document Feedback Copyright © 2026 Texas Instruments Incorporated

Product Folder Links: TXG1041-Q1 TXG1042-Q1

16 VCCB

7OE_A 10 OE_B 1VCCA 8GNDA 9 GNDB Figure 4-5. TXG1041-Q1 DBQ 16-Pin QSOP Top View Table 4-5. TXG1041-Q1 DBQ Pin Functions PIN I/O DESCRIPTION Name TXG1041-Q1 A1 3 I Input A1. Referenced to VCCA A2 4 I Input A2. Referenced to VCCA A3 5 I Input A3. Referenced to VCCA A4Y 6 O Output A4. Referenced to VCCA B1Y 14 O Output B1. Referenced to VCCB B2Y 13 O Output B2. Referenced to VCCB B3Y 12 O Output B3. Referenced to VCCB B4 11 I Input B4. Referenced to VCCB OE_A 7 I Active-High Output Enable (A side). Pull to GND to place all outputs in high- impedance mode. OE_B 10 I Active-High Output Enable (B side). Pull to GND to place all outputs in high- impedance mode. VCCA 1 — A side supply voltage. 1.71V ≤ VCCA ≤ 5.5V VCCB 16 — B side supply voltage. 1.71V ≤ VCCB ≤ 5.5V GNDA 2, 8 — Ground reference for VCCA GNDB 9, 15 — Ground reference for VCCB www.ti.com TXG1041-Q1, TXG1042-Q1 SCES986A – APRIL 2025 – REVISED JANUARY 2026 Copyright © 2026 Texas Instruments Incorporated Submit Document Feedback 7 Product Folder Links: TXG1041-Q1 TXG1042-Q1

7OE_A 10 OE_B 1VCCA 8GNDA 9 GNDB Figure 4-6. TXG1042-Q1 DBQ 16-Pin QSOP Top View Table 4-6. TXG1042-Q1 DBQ Pin Functions PIN I/O DESCRIPTION Name TXG1042-Q1 A1 3 I Input A1. Referenced to VCCA A2 4 I Input A2. Referenced to VCCA A3Y 5 O Output A3. Referenced to VCCA A4Y 6 O Output A4. Referenced to VCCA B1Y 14 O Output B1. Referenced to VCCB B2Y 13 O Output B2. Referenced to VCCB B3 12 I Input B3. Referenced to VCCB B4 11 I Input B4. Referenced to VCCB OE_A 7 I Active-High Output Enable (A side). Pull to GND to place all outputs in high-impedance mode. OE_B 10 I Active-High Output Enable (B side). Pull to GND to place all outputs in high-impedance mode. VCCA 1 — A side supply voltage. 1.71V ≤ VCCA ≤ 5.5V VCCB 16 — B side supply voltage. 1.71V ≤ VCCB ≤ 5.5V GNDA 2, 8 — Ground reference for VCCA GNDB 9, 15 — Ground reference for VCCB TXG1041-Q1, TXG1042-Q1 SCES986A – APRIL 2025 – REVISED JANUARY 2026 www.ti.com

8 Submit Document Feedback Copyright © 2026 Texas Instruments Incorporated

Product Folder Links: TXG1041-Q1 TXG1042-Q1

5 Specifications

5.1 Absolute Maximum Ratings

over operating free-air temperature range (unless otherwise noted)(1) MIN MAX UNIT VCCA to VGNDA Supply voltage A to Ground voltage A –0.5 6.5 V VCCB to VGNDB Supply voltage B to Ground voltage B –0.5 6.5 V VGNDA to VGNDB Voltage between GNDA and GNDB -15 15 V VI Input Voltage(2) I/O Ports (A Port) to VGNDA –0.5 6.5 V I/O Ports (B Port) to VGNDB –0.5 6.5 OE –0.5 6.5 V VO Voltage applied to any output in the high-impedance or power-off state(2) A Port to VGNDA –0.5 6.5 V B Port to VGNDB –0.5 6.5 VO Voltage applied to any output in the high or low state(2) (3) A Port to VGNDA –0.5 6.5 V B Port to VGNDB –0.5 6.5 IIK Input clamp current VI < 0 –20 mA IOK Output clamp current VO < 0 –20 mA IO Continuous output current –16 16 mA Continuous current through VCCx or GNDx –64 64 mA Tj Junction Temperature 150 °C Tstg Storage temperature –65 150 °C (1) Stresses beyond those listed under Section 5.1 may cause permanent damage to the device. These are stress ratings only, which do not imply functional operation of the device at these or any other conditions beyond those indicated under Section 5.3 Exposure beyond the limits listed in Section 5.3 may affect device reliability. (2) The input voltage and output negative-voltage ratings may be exceeded if the input and output current ratings are observed. (3) The output positive-voltage rating may be exceeded up to 6.5V maximum if the output current rating is observed.

5.2 ESD Ratings

V(ESD) Electrostatic discharge Human body model (HBM), per ANSI/ESDA/JEDEC JS-001(1) ±4000 V Charged device model (CDM), per ANSI/ESDA/JEDEC JS-002(2) ±500 (1) JEDEC document JEP155 states that 500V HBM allows safe manufacturing with a standard ESD control process. (2) JEDEC document JEP157 states that 250V CDM allows safe manufacturing with a standard ESD control process. www.ti.com TXG1041-Q1, TXG1042-Q1 SCES986A – APRIL 2025 – REVISED JANUARY 2026 Copyright © 2026 Texas Instruments Incorporated Submit Document Feedback 9 Product Folder Links: TXG1041-Q1 TXG1042-Q1

5.3 Recommended Operating Conditions

over operating free-air temperature range (unless otherwise noted) (1) (2) (3) MIN TYP MAX UNIT VCCA Supply voltage A - Relative to GNDA 1.71 5.5 V VCCB Supply voltage B - Relative to GNDB 1.71 5.5 V VGNDA to VGNDB Voltage between GNDA and GNDB -10 10 V IOH High-level output current VCCO = 1.71V –4.5 mA VCCO = 2.3V –8 VCCO = 3V –10 VCCO = 4.5V –12 IOL Low-level output current VCCO = 1.71V 4.5 mA VCCO = 2.3V 8 VCCO = 3V 10 VCCO = 4.5V 12 VI Input voltage - Relative to GNDx 0 5.5 V VO Output voltage - Relative to GNDx 0 VCCO V TA Operating free-air temperature –40 125 °C (1) VCCI is the VCC associated with the input port. (2) VCCO is the VCC associated with the output port. (3) All control inputs and data I/Os of this device have weak pulldowns to ensure the line is not floating when undefined external to the device. The input leakage from these weak pulldowns is defined by the II specification indicated under Section 5.5.

5.4 Thermal Information

THERMAL METRIC(1) TXGx041 and TXGx042 UNITDYY (SOT) RUC (X2QFN) DBQ (QSOP)

14 PINS 14 PINS 16 PINS

RθJA Junction-to-ambient thermal resistance 128.4 99.7 143.1 °C/W RθJC(top) Junction-to-case (top) thermal resistance 52.4 57.9 82.3 °C/W RθJB Junction-to-board thermal resistance 58.5 51.9 46.9 °C/W YJT Junction-to-top characterization parameter 2.7 8.1 1.2 °C/W YJB Junction-to-board characterization parameter 51.9 57.2 81.9 °C/W (1) For more information about traditional and new thermal metrics, see the Semiconductor and IC Package Thermal Metrics application note. TXG1041-Q1, TXG1042-Q1 SCES986A – APRIL 2025 – REVISED JANUARY 2026 www.ti.com

10 Submit Document Feedback Copyright © 2026 Texas Instruments Incorporated

Product Folder Links: TXG1041-Q1 TXG1042-Q1

5.5 Electrical Characteristics

over operating free-air temperature range (unless otherwise noted)(1) (2) PARAMETER TEST CONDITIONS VCCA VCCB Operating free-air temperature (TA) UNIT–40°C to 125°C MIN TYP MAX VOH High-level output voltage (3) IOH = –4.5mA 1.71V 1.71V 1.5 V IOH = –8mA 2.3V 2.3V 2.0 IOH = –10mA 3V 3V 2.6 IOH = –12mA 4.5V 4.5V 4.0 VOL Low-level output voltage (4) IOL = 4.5mA 1.71V 1.71V 0.18 V IOL = 8mA 2.3V 2.3V 0.33 IOL = 10mA 3V 3V 0.41 IOL = 12mA 4.5V 4.5V 0.49 VT+ Positive-going input-threshold voltage Data Inputs (Ax, Bx) (Referenced to VCCI) 1.71V 1.71V 1.14 V 2.3V 2.3V 1.42 3V 3V 1.74 4.5V 4.5V 2.47 5.5V 5.5V 2.97 VT+ Positive-going input-threshold voltage OE (Referenced to VCCA or VCCB) 1.71V 1.71V 1.12 V 2.3V 2.3V 1.42 3V 3V 1.73 4.5V 4.5V 2.47 5.5V 5.5V 2.96 VT- Negative-going input-threshold voltage Data Inputs (Ax, Bx) (Referenced to VCCI) 1.71V 1.71V 0.52 V 2.3V 2.3V 0.76 3V 3V 1.09 4.5V 4.5V 1.6 5.5V 5.5V 2.0 VT- Negative-going input-threshold voltage OE (Referenced to VCCA or VCCB) 1.71V 1.71V 0.46 V 2.3V 2.3V 0.76 3V 3V 1.04 4.5V 4.5V 1.7 5.5V 5.5V 2.2 ΔVT Input-threshold hysteresis (VT+ – VT-) Data Inputs (Ax, Bx) (Referenced to VCCI) 1.71V 1.71V 0.24 0.54 V 2.3V 2.3V 0.29 0.60 3V 3V 0.33 0.54 4.5V 4.5V 0.38 0.82 5.5V 5.5V 0.37 0.96 ΔVT Input-threshold hysteresis (VT+ – VT-) OE (Referenced to VCCA or VCCB) 1.71V 1.71V 0.24 0.45 V 2.3V 2.3V 0.28 0.58 3V 3V 0.32 0.54 4.5V 4.5V 0.35 0.58 5.5V 5.5V 0.39 0.62 II Input leakage current Data Inputs (Ax, Bx) VI = VCCI or GND www.ti.com TXG1041-Q1, TXG1042-Q1 SCES986A – APRIL 2025 – REVISED JANUARY 2026 Copyright © 2026 Texas Instruments Incorporated Submit Document Feedback 11 Product Folder Links: TXG1041-Q1 TXG1042-Q1

over operating free-air temperature range (unless otherwise noted)(1) (2) PARAMETER TEST CONDITIONS VCCA VCCB Operating free-air temperature (TA) UNIT–40°C to 125°C MIN TYP MAX Ioff-float Floating supply Partial power down current A Port or B Port VI = GND Floating(5) 0V - 5.5V –1.6 1.6 µA 0V - 5.5V Floating(5) –1.6 1.6 IO Tri-state output Output current A or B Port: VI = VCCA or VGNDA OE = GND 1.71V – 5.5V 1.1V – 5.5V –5 5 µA Ci Control Input Capacitance VI = 3.3V or VGNDA 3.3V 3.3V 2 pF Cio Data I/O Capacitance OE = GND, VO = 1.71V DC +1MHz -16dBm sine wave 3.3V 3.3V 5 pF CGND Cap between grounds All channels combined (VCC both sides are powered on) 49 pF All channels combined (VCC to GND shorted) 54 pF Leakage Current Leakage between GndA to GndB All channels combined (VCC to GND shorted) 1.71V – 5.5V 1.71V – 5.5V 28 nA All channels combined (VCC both sides are powered on and inputs are all low) 1.71V – 5.5V 1.71V – 5.5V 28 nA All channels combined (VCC both sides are powered on and inputs are all high) 1.71V – 5.5V 1.71V – 5.5V 33 µA CMTI Common Mode Transient Immunity Input toggling at 100Mbps Ground shift up to 10V 1.71V – 5.5V 1.71V – 5.5V 1 kV/µs VUVLO+ Positive-Going Undervoltage Lockout Voltage A Supply 1.71V – 5.5V 1.55 V B Supply 1.71V – 5.5V 1.55 VUVLO- Negative-Going Undervoltage Lockout Voltage A Supply 1.71V – 5.5V 1.36 V B Supply 1.71V – 5.5V 1.36 VUVLO_Hys Undervoltage Lockout Hysteresis A Supply 1.71V – 5.5V 36 147 mV B Supply 1.71V – 5.5V 36 147 (1) VCCI is the VCC associated with the input port and referenced to GNDA (2) VCCO is the VCC associated with the output port and referenced to GNDB (3) Tested at VI = VT+(MAX) (4) Tested at VI = VT-(MIN) (5) Floating is defined as a node that is both not actively driven by an external device and has leakage not exeeding 10nA TXG1041-Q1, TXG1042-Q1 SCES986A – APRIL 2025 – REVISED JANUARY 2026 www.ti.com

12 Submit Document Feedback Copyright © 2026 Texas Instruments Incorporated

Product Folder Links: TXG1041-Q1 TXG1042-Q1

5.6 Supply Current

over operating free-air temperature range (unless otherwise noted)(1) (2) PARAMETER TEST CONDITIONS VCCA VCCB Operating free-air temperature (TA) UNIT–40°C to 125°C MIN TYP MAX TXGx041 ICCA VCCA supply current VI = VCCI or GND IO = 0 1.71V – 5.5V 1.71V – 5.5V 546 1220 µA 0V 5.5V -3 13 5.5V 0V 509 1050 VI = GND IO = 0 5.5V Floating(3) 509 1050 ICCB VCCB supply current VI = VCCI or GND IO = 0 1.71V – 5.5V 1.71V – 5.5V 750 1836 µA 0V 5.5V 654 1350 5.5V 0V -3 36 VI = GND IO = 0 Floating(3) 5.5V 656 1350 ICCA + ICCB Supply Current - Disable EN = 0 1.8V 1.8V 1.9 3.1 mA 2.5V 2.5V 1.9 3.1 3.3V 3.3V 2.0 3.1 5V 5V 2.1 3.3 ICCA + ICCB Supply Current - DC Signal VI = VCCI 1.8V 1.8V 1 2.65 mA 2.5V 2.5V 1.3 2.7 3.3V 3.3V 1.3 2.8 5V 5V 1.4 3.1 VI = GND 1.8V 1.8V 1.2 2.7 2.5V 2.5V 1.3 2.7 3.3V 3.3V 1.3 2.8 5V 5V 1.4 3.1 www.ti.com TXG1041-Q1, TXG1042-Q1 SCES986A – APRIL 2025 – REVISED JANUARY 2026 Copyright © 2026 Texas Instruments Incorporated Submit Document Feedback 13 Product Folder Links: TXG1041-Q1 TXG1042-Q1

over operating free-air temperature range (unless otherwise noted)(1) (2) PARAMETER TEST CONDITIONS VCCA VCCB Operating free-air temperature (TA) UNIT–40°C to 125°C MIN TYP MAX ICCA + ICCB Supply Current - AC Signal All channels switching with square wave clock input; CL = 15pF, 1Mbps 1.8V 1.8V 1.5 2.6 mA 2.5V 2.5V 1.6 2.7 3.3V 3.3V 1.6 2.8 5V 5V 1.9 3.3 All channels switching with square wave clock input; CL = 15pF, 50Mbps 1.8V 1.8V 9.2 12.1 2.5V 2.5V 10.8 14 3.3V 3.3V 12.4 16.2 5V 5V 17.6 20.6 All channels switching with square wave clock input; CL = 15pF, 100Mbps 1.8V 1.8V 16.5 20.1 2.5V 2.5V 20.2 24.7 3.3V 3.3V 24.1 29 5V 5V 35 38 TXGx042 ICCA VCCA supply current VI = VCCI or GND IO = 0 1.71V – 5.5V 1.71V – 5.5V 547 1365 µA 0V 5.5V -2.6 25 5.5V 0V 625 1052 VI = GND IO = 0 5.5V Floating(3) 625 1052 ICCB VCCB supply current VI = VCCI or GND IO = 0 1.71V – 5.5V 1.71V – 5.5V 753 1692 µA 0V 5.5V 819 1380 5.5V 0V -2.4 25 VI = GND IO = 0 Floating(3) 5.5V 823 1380 ICCA + ICCB Supply Current - Disable EN = 0 1.8V 1.8V 1.9 3.1 mA 2.5V 2.5V 1.9 3.1 3.3V 3.3V 2 3.1 5V 5V 2.1 3.3 TXG1041-Q1, TXG1042-Q1 SCES986A – APRIL 2025 – REVISED JANUARY 2026 www.ti.com

14 Submit Document Feedback Copyright © 2026 Texas Instruments Incorporated

Product Folder Links: TXG1041-Q1 TXG1042-Q1

over operating free-air temperature range (unless otherwise noted)(1) (2) PARAMETER TEST CONDITIONS VCCA VCCB Operating free-air temperature (TA) UNIT–40°C to 125°C MIN TYP MAX ICCA + ICCB Supply Current - DC Signal VI = VCCI 1.8V 1.8V 1.2 2.7 mA 2.5V 2.5V 1.3 2.6 3.3V 3.3V 1.3 2.7 5V 5V 1.4 3.1 VI = GND 1.8V 1.8V 1.2 2.7 2.5V 2.5V 1.3 2.6 3.3V 3.3V 1.3 2.7 5V 5V 1.4 3.1 ICCA + ICCB Supply Current - AC Signal All channels switching with square wave clock input; CL = 15pF, 1Mbps 1.8V 1.8V 1.5 2.6 mA 2.5V 2.5V 1.6 2.7 3.3V 3.3V 1.6 2.8 5V 5V 1.9 3.3 All channels switching with square wave clock input; CL = 15pF, 50Mbps 1.8V 1.8V 9.5 12.9 2.5V 2.5V 10.6 13.9 3.3V 3.3V 12.9 15.9 5V 5V 17.7 20.8 All channels switching with square wave clock input; CL = 15pF, 100Mbps 1.8V 1.8V 16.5 20 2.5V 2.5V 20.5 25.2 3.3V 3.3V 24.4 28.7 5V 5V 34.9 38.4 (1) VCCI is the VCC associated with the input port (2) VCCO is the VCC associated with the output port (3) Floating is defined as a node that is both not actively driven by an external device and has leakage not exeeding 10nA www.ti.com TXG1041-Q1, TXG1042-Q1 SCES986A – APRIL 2025 – REVISED JANUARY 2026 Copyright © 2026 Texas Instruments Incorporated Submit Document Feedback 15 Product Folder Links: TXG1041-Q1 TXG1042-Q1

5.7 Switching Characteristics, VCCA = 1.8 ± 0.15V PARAMETER TEST CONDITIONS FROM TO TEMPERATURE B-Port Supply Voltage (VCCB) MIN TYP MAX MIN TYP MAX MIN TYP MAX MIN TYP MAX tpd Propagation delay 1Mbps all 4 channels toggling ns tdis Disable time OE A -40°C to 85°C 16.1 35 16.1 35 16.1 35 16.1 35 ns ten Enable time ns PWD Pulse width distortion |tphl - tplh| ns tr Output signal rise time ns tf Output signal fall time ns tDO Default output delay time from input power loss Measured from the time VCC goes below 1.36V -40°C to 85°C 8.4 8.3 8.2 8 µs -40°C to 125°C 8.4 8.3 8.2 8 tPU Time from ULVO to valid output data -40°C to 85°C 66.8 66.8 66.8 66.9 µs -40°C to 125°C 66.8 66.8 66.8 66.9 TXG1041-Q1, TXG1042-Q1 SCES986A – APRIL 2025 – REVISED JANUARY 2026 www.ti.com

16 Submit Document Feedback Copyright © 2026 Texas Instruments Incorporated

Product Folder Links: TXG1041-Q1 TXG1042-Q1

5.8 Switching Characteristics, VCCA = 2.5 ± 0.2V PARAMETER TEST CONDITIONS FROM TO TEMPERATURE B-Port Supply Voltage (VCCB) MIN TYP MAX MIN TYP MAX MIN TYP MAX MIN TYP MAX tpd Propagation delay 1Mbps all 4 channels toggling ns tdis Disable time ns ten Enable time ns PWD Pulse width distortion |tphl - tplh| ns tr Output signal rise time ns B A -40°C to 85°C 0.5 1 0.5 1 0.5 1 0.5 1 tf Output signal fall time ns tDO Default output delay time from input power loss Measured from the time VCC goes below 1.36V -40°C to 85°C 8.1 8.1 8 7.8 µs -40°C to 125°C 8.1 8.1 8 7.8 tPU Time from ULVO to valid output data -40°C to 85°C 71.3 71.3 71.3 71.3 µs -40°C to 125°C 71.3 71.3 71.3 71.3 www.ti.com TXG1041-Q1, TXG1042-Q1 SCES986A – APRIL 2025 – REVISED JANUARY 2026 Copyright © 2026 Texas Instruments Incorporated Submit Document Feedback 17 Product Folder Links: TXG1041-Q1 TXG1042-Q1

5.9 Switching Characteristics, VCCA = 3.3 ± 0.3V PARAMETER TEST CONDITIONS FROM TO TEMPERATURE B-Port Supply Voltage (VCCB) MIN TYP MAX MIN TYP MAX MIN TYP MAX MIN TYP MAX tpd Propagation delay 1Mbps all 4 channels toggling ns tdis Disable time ns ten Enable time OE A -40°C to 85°C 3 8 3.1 8 3.1 8 3 8 ns PWD Pulse width distortion |tphl - tplh| ns tr Output signal rise time ns tf Output signal fall time ns tDO Default output delay time from input power loss Measured from the time VCC goes below 1.36V -40°C to 85°C 8 7.9 7.9 7.7 µs -40°C to 125°C 8 7.9 7.9 7.7 µs tPU Time from ULVO to valid output data -40°C to 85°C 79.1 79.1 79.1 79.1 µs -40°C to 125°C 79.1 79.1 79.1 79.1 µs TXG1041-Q1, TXG1042-Q1 SCES986A – APRIL 2025 – REVISED JANUARY 2026 www.ti.com

18 Submit Document Feedback Copyright © 2026 Texas Instruments Incorporated

Product Folder Links: TXG1041-Q1 TXG1042-Q1

5.10 Switching Characteristics, VCCA = 5.0 ± 0.5V PARAMETER TEST CONDITIONS FROM TO TEMPERATURE B-Port Supply Voltage (VCCB) MIN TYP MAX MIN TYP MAX MIN TYP MAX MIN TYP MAX tpd Propagation delay 1Mbps all 4 channels toggling ns tdis Disable time ns ten Enable time ns PWD Pulse width distortion |tphl - tplh| ns tr Output signal rise time ns tf Output signal fall time ns tDO Default output delay time from input power loss Measured from the time VCC goes below 1.36V -40°C to 85°C 7.9 7.8 7.7 7.6 µs -40°C to 125°C 7.9 7.8 7.7 7.6 tPU Time from ULVO to valid output data -40°C to 85°C 98.3 98.3 98.3 98.3 µs -40°C to 125°C 98.3 98.3 98.3 98.3 www.ti.com TXG1041-Q1, TXG1042-Q1 SCES986A – APRIL 2025 – REVISED JANUARY 2026 Copyright © 2026 Texas Instruments Incorporated Submit Document Feedback 19 Product Folder Links: TXG1041-Q1 TXG1042-Q1

5.11 Switching Characteristics: Tsk, TMAX

over operating free-air temperature range (unless otherwise noted) PARAMETER TEST CONDITIONS VCCI VCCO Operating free-air temperature (TA) UNIT-40°C to 125°C MIN TYP MAX TMAX - Maximum Data Rate 50% Duty Cycle Input One channel switching 20% of pulse > 0.7*VCCO 20% of pulse < 0.3*VCCO No Translation 1.65V - 1.95V 1.65V - 1.95V 264 Mbps 2.3V - 2.7V 2.3V - 2.7V 264 Mbps 3.0V - 3.6V 3.0V - 3.6V 176 Mbps 4.5V - 5.5V 4.5V - 5.5V 176 Mbps TMAX - Maximum Data Rate 50% Duty Cycle Input One channel switching 20% of pulse > 0.7*VCCO 20% of pulse < 0.3*VCCO Up Translation 1.65V - 1.95V 2.3V - 2.7V 264 Mbps 1.65V - 1.95V 3.0V - 3.6V 264 Mbps 1.65V - 1.95V 4.5V - 5.5V 264 Mbps 2.3V - 2.7V 3.0V - 3.6V 264 Mbps 2.3V - 2.7V 4.5V - 5.5V 220 Mbps 3.0V - 3.6V 4.5V - 5.5V 176 Mbps TMAX - Maximum Data Rate 50% Duty Cycle Input One channel switching 20% of pulse > 0.7*VCCO 20% of pulse < 0.3*VCCO Down Translation 2.3V - 2.7V 1.65V - 1.95V 285 Mbps 3.0V - 3.6V 2.3V - 2.7V 220 Mbps 3.0V - 3.6V 1.65V - 1.95V 220 Mbps 4.5V - 5.5V 3.0V - 3.6V 176 Mbps 4.5V - 5.5V 2.3V - 2.7V 220 Mbps 4.5V - 5.5V 1.65V - 1.95V 220 Mbps tsk - Output skew Timing skew between any switching outputs on the rising or falling edge (same direction channels) No Translation tsk - Output skew Timing skew between any switching outputs on the rising or falling edge (same direction channels) Up Translation TXG1041-Q1, TXG1042-Q1 SCES986A – APRIL 2025 – REVISED JANUARY 2026 www.ti.com

20 Submit Document Feedback Copyright © 2026 Texas Instruments Incorporated

Product Folder Links: TXG1041-Q1 TXG1042-Q1

over operating free-air temperature range (unless otherwise noted) PARAMETER TEST CONDITIONS VCCI VCCO Operating free-air temperature (TA) UNIT-40°C to 125°C MIN TYP MAX tsk - Output skew Timing skew between any switching outputs on the rising or falling edge (same direction channels) Down Translation www.ti.com TXG1041-Q1, TXG1042-Q1 SCES986A – APRIL 2025 – REVISED JANUARY 2026 Copyright © 2026 Texas Instruments Incorporated Submit Document Feedback 21 Product Folder Links: TXG1041-Q1 TXG1042-Q1

6 Parameter Measurement Information

6.1 Load Circuit and Voltage Waveforms

Unless otherwise noted, generators supply all input pulses that have the following characteristics:

• f = 1MHz
• ZO = 50Ω
• Δt/ΔV ≤ 1ns/V Output Pin Under Test CL (1) RL RL GND Open 2 x VCCO Measurement Point A. CL includes probe and jig capacitance. Figure 6-1. Load Circuit Table 6-1. Load Circuit Conditions Parameter VCCO RL CL S1 VTP tpd Propagation (delay) time 1.71V – 5.5V 10kΩ 15pF Open N/A ten, tdis Enable time, disable time 1.71V – 2.7V 10kΩ 15pF 2 × VCCO 0.15V 3.0V – 5.5V 10kΩ 15pF 2 × VCCO 0.3V ten, tdis Enable time, disable time 1.71V – 2.7V 10kΩ 15pF GND 0.15V 3.0V – 5.5V 10kΩ 15pF GND 0.3V VO VI VOL VOH VCCI 0 V tr tf tPLH tPHL 50% 50% 50% 50% 90% 10% 1. VCCI is the supply pin associated with the input port. 2. VOH and VOL are typical output voltage levels that occur with specified RL, CL, and S1 Figure 6-2. Switching Characteristics Voltage Waveforms TXG1041-Q1, TXG1042-Q1 SCES986A – APRIL 2025 – REVISED JANUARY 2026 www.ti.com

22 Submit Document Feedback Copyright © 2026 Texas Instruments Incorporated

Product Folder Links: TXG1041-Q1 TXG1042-Q1

7 Detailed Description

7.1 Overview

The TXG104x-Q1 is a 4-bit ground-level translator that uses two individually configurable power-supply rails which allows it to translate across two different power domains. The device is operational with V CCA and V CCB supplies as low as 1.71V and as high as 5.5V. The A port is designed to track V CCA and the B port is designed to track V CCB. In addition to I/O level shifting, this translator can support a difference of -10V to +10V between GNDA and GNDB. VCCA is referenced to GNDA and VCCB is referenced to GNDB. The TXG104x-Q1 device is designed for asynchronous communication between data buses, and transmits data with fixed direction from the A bus to the B bus on some channels and from the B bus to the A bus on the remaining channels. The output-enable input (OE) is used to disable the outputs so the buses are effectively isolated. The OE_A pin is referenced to V CCA and OE_B pin is referenced to V CCB. The OE pin can be left floating or externally pulled down to ground to keep the translator outputs in a high-impedance state during power-up or power-down. The VCC disconnect feature is designed so that if V CC is disconnected with the complementary supply within recommended operating conditions, outputs are disabled and set to the high-impedance state while the supply current is maintained. The Ioff-float circuitry makes sure that no excessive current is drawn from or sourced into an input or output while the supply is floating. Glitch-free power supply sequencing allows either supply rail to be powered on or off in any order while providing robust power sequencing performance.

7.2 Functional Block Diagram

OE_B VCCA VCCB B1Y B2Y B3Y GNDB OE_A Figure 7-1. TXG1041-Q1 Functional Block Diagram TXG1041-Q1, TXG1042-Q1 SCES986A – APRIL 2025 – REVISED JANUARY 2026 www.ti.com

24 Submit Document Feedback Copyright © 2026 Texas Instruments Incorporated

Product Folder Links: TXG1041-Q1 TXG1042-Q1

OE_B VCCA VCCB B1Y B2Y A3Y GNDB OE_A Figure 7-2. TXG1042-Q1 Functional Block Diagram www.ti.com TXG1041-Q1, TXG1042-Q1 SCES986A – APRIL 2025 – REVISED JANUARY 2026 Copyright © 2026 Texas Instruments Incorporated Submit Document Feedback 25 Product Folder Links: TXG1041-Q1 TXG1042-Q1

7.3 Feature Description

7.3.1 CMOS Schmitt-Trigger Inputs with Integrated Pulldowns

Standard CMOS inputs are high impedance and are typically modeled as a resistor in parallel with the input capacitance given in the Section 5.5. The worst case resistance is calculated with the maximum input voltage, given in the Section 5.1, and the maximum input leakage current, given in the Section 5.5, using ohm's law (R = V ÷ I). The Schmitt-trigger input architecture provides hysteresis as defined by ΔVT in the Section 5.5, which makes this device extremely tolerant to slow or noisy inputs. Driving the inputs slowly will increase dynamic current consumption of the device. See Understanding Schmitt Triggers for additional information regarding Schmitt- trigger inputs.

7.3.1.1 Inputs with Integrated Static Pull-Down Resistors

This device has 5M Ω typical integrated weak pull-downs for each input. This feature allows all inputs to be left floating without the concern for unstable outputs or increased current consumption. This also helps to reduce external component count for applications where not all channels are used or need to be fixed low. If an external pull-up is required, it should be no larger than 1MΩ to avoid contention with the 5MΩ internal pull-down.

7.3.2 Balanced High-Drive CMOS Push-Pull Outputs

A balanced output allows the device to sink and source similar currents. The high drive capability of this device creates fast edges into light loads, so routing and load conditions should be considered to prevent ringing. Additionally, the outputs of this device are capable of driving larger currents than the device can sustain without being damaged. Section 5.1 defines the electrical and thermal limits that must be followed at all times.

7.3.3 VCC Disconnect

The outputs for this device are disabled and enter a high-impedance state when either supply is left floating (disconnected), and with the complementary supply within recommended operating conditions. It is recommended that the inputs are kept low before floating (disconnecting) either supply. The ICCx(floating) in the Section 5.5 specifies the maximum supply current. The I off(float) in the Section 5.5 specifies the maximum leakage into or out of any input or output pin on the device. Hi-Z Hi-Z Io ( oat) Io ( oat) VCCA VCCA VCCB OE_B OE_A GNDA B1Y VCCB Disabled Supply disconnected ICCB maintained GNDB B4A4Y Disabled Figure 7-3. VCC Disconnect Feature

7.3.4 Over-Voltage Tolerant Inputs

Input signals to this device can be driven above the supply voltage so long as they remain below the maximum input voltage value specified in the Section 5.3. TXG1041-Q1, TXG1042-Q1 SCES986A – APRIL 2025 – REVISED JANUARY 2026 www.ti.com

26 Submit Document Feedback Copyright © 2026 Texas Instruments Incorporated

Product Folder Links: TXG1041-Q1 TXG1042-Q1

7.3.5 Glitch-Free Power Supply Sequencing

Either supply rail may be powered on or off in any order without producing a glitch on the inputs or outputs (that is, where the output erroneously transitions to V CC when it should be held low or vice versa). Glitches of this nature can be misinterpreted by a peripheral as a valid data bit, which could trigger a false device reset of the peripheral, a false device configuration of the peripheral, or even a false data initialization by the peripheral.

7.3.6 Negative Clamping Diodes

Figure 7-4 depicts the inputs and outputs to this device that have negative clamping diodes. CAUTION Voltages beyond the values specified in the Section 5.1 table can cause damage to the device. The input negative-voltage and output voltage ratings may be exceeded if the input and output clamp-current ratings are observed. GND Level Shifter Input or I/O configured as input VCCA Device -IIK -IOK VCCB I/O configured as output Figure 7-4. Electrical Placement of Clamping Diodes for Each Input and Output

7.3.7 Fully Configurable Dual-Rail Design

The VCCA and V CCB pins can be supplied at any voltage from 1.71V to 5.5V, making the device an excellent

7.3.8 Supports High-Speed Translation

The TXG104x-Q1 device can support high data-rate applications. The translated signal data rate can be greater than 250Mbps when the signal is translated from 1.71V to 5.5V. www.ti.com TXG1041-Q1, TXG1042-Q1 SCES986A – APRIL 2025 – REVISED JANUARY 2026 Copyright © 2026 Texas Instruments Incorporated Submit Document Feedback 27 Product Folder Links: TXG1041-Q1 TXG1042-Q1

7.3.9 AC Noise Rejection

TXG104x-Q1 supports I/O voltage translation in environments with noisy grounds. The plot below illustrates the amount of noise that GNDA and GNDB can reject in terms peak-to-peak voltage over frequency without disrupting communication between two systems. As an example, Figure 7-6 below shows GNDA with a ground bounce of 2VPP at 10kHz but still effectively translating 5V to 2.5V without any degradation. F r e q u e n c y ( H z ) Amplitude (VPP) 1 x 1 0 1 0 x 1 0 1 0 0 x 1 0 1 x 1 0 1 0 x 1 0 1 0 0 x 1 0 2 0 4 0 6 0 8 0 1 0 0 1 2 0 1 4 0 1 6 0 1 8 0 Figure 7-5. AC Noise Rejection Plot Figure 7-6. Waveform showing 5V to 2.5V I/O translation with AC Ground Noise of 2VPP at 10kHz TXG1041-Q1, TXG1042-Q1 SCES986A – APRIL 2025 – REVISED JANUARY 2026 www.ti.com

28 Submit Document Feedback Copyright © 2026 Texas Instruments Incorporated

Product Folder Links: TXG1041-Q1 TXG1042-Q1

7.4 Device Functional Modes

Table 7-1. Function Table Power Supply (1) Control Inputs Port Status VCCI VCCO OE Input Output PU PU H H H PU PU H L L PU PU L or Open X Hi-Z PU PU H Open L PD PU H X L X PU L or Open X High-Z X PU H X L X PD X X Undetermined (1) In the table above: PU = Powered Up; PD = Powered Down; X = Irrelevant; H = High Level; L = Low Level; Open = Floating www.ti.com TXG1041-Q1, TXG1042-Q1 SCES986A – APRIL 2025 – REVISED JANUARY 2026 Copyright © 2026 Texas Instruments Incorporated Submit Document Feedback 29 Product Folder Links: TXG1041-Q1 TXG1042-Q1

8 Application and Implementation

Information in the following applications sections is not part of the TI component specification, and TI does not warrant its accuracy or completeness. TI’s customers are responsible for determining suitability of components for their purposes, as well as validating and testing their design implementation to confirm system functionality.

8.1 Application Information

The TXG104x-Q1 is used for level translation, enabling communication between devices or systems operating at different interface and ground voltages. The TXG104x-Q1 device is ideal for use in applications where a push-pull driver is connected to the data inputs. Figure 8-1 is an example of two systems that translate from 1.8V to 3.3V across a SPI while also seeing a ground shift of -5V on GNDB while GNDA is at 0V. The ground shift occurs due to the parasitic resistance of the cable used to connect the 48V battery ground and 12V battery ground to the chassis of the car.

8.2 Typical Application

1.8 V 3.3 V 0.1 µF 0.1 µF TXGx041-Q1 CS CS OUT2IN2SCLK SCLK OE_A IN3 OUT4 OUT3 IN4 SDO SDI SDI SDO Amplifier 1.8 V GNDA GNDB Chassis GND OE_B 3.3 V 48V Battery GND 12V Battery GND 0V -5V Figure 8-1. TXG1041-Q1 in Automotive

8.2.1 Design Requirements

Use the parameters listed in Table 8-1 for this design example. Table 8-1. Design Parameters DESIGN PARAMETERS EXAMPLE VALUES Input voltage range 1.71V to 5.5V Output voltage range 1.71V to 5.5V TXG1041-Q1, TXG1042-Q1 SCES986A – APRIL 2025 – REVISED JANUARY 2026 www.ti.com

30 Submit Document Feedback Copyright © 2026 Texas Instruments Incorporated

Product Folder Links: TXG1041-Q1 TXG1042-Q1

8.2.2 Detailed Design Procedure

To begin the design process, determine the following:

• Input voltage range – Use the supply voltage of the device that is driving the TXG104x-Q1 device to determine the input voltage range. For a valid logic-high, the value must exceed the positive-going input-threshold voltage (VT+) of the input port. For a valid logic low the value must be less than the negative-going input-threshold voltage (VT-) of the input port.
• Output voltage range – Use the supply voltage of the device that the TXG104x-Q1 device is driving to determine the output voltage range.

8.2.3 Application Curves

Figure 8-2. Waveform showing -10V (top) and +10V (bottom) Ground Shift with 5V to 2.5V I/O Translation www.ti.com TXG1041-Q1, TXG1042-Q1 SCES986A – APRIL 2025 – REVISED JANUARY 2026 Copyright © 2026 Texas Instruments Incorporated Submit Document Feedback 31 Product Folder Links: TXG1041-Q1 TXG1042-Q1

8.3 Power Supply Recommendations

Always apply a ground reference to the GND pins first. This device is designed for glitch free power sequencing without any supply sequencing requirements such as ramp order or ramp rate. Please make sure the difference between VCC and GND remains at 6.5V max at all times.

8.4 Layout

8.4.1 Layout Guidelines

To ensure reliability of the device, following common printed-circuit board layout guidelines are recommended:

• Use bypass capacitors on the power supply pins and place them as close to the device as possible. A 0.1µF capacitor is recommended, but transient performance can be improved by having 1µF and 0.1µF capacitors in parallel as bypass capacitors.
• The high drive capability of this device creates fast edges into light loads so routing and load conditions should be considered to prevent ringing.
• A 0.1µF capacitor can be added between GNDA and GNDB to improve performances of CMTI.

8.4.2 Layout Example

B G Legend TXGx041-Q1 (DBQ Package) GND IN1 IN2 IN3 OUT4 OE_A GNDA VCCA VCCB OUT1 OUT2 OUT3 IN4 OE_B GNDB GND A 1 116 115 114 113 512 511 510 G G B 0.1uF 0.1uF Power Domain A Power Domain B A G G B Figure 8-3. DBQ Layout Example TXG1041-Q1, TXG1042-Q1 SCES986A – APRIL 2025 – REVISED JANUARY 2026 www.ti.com

32 Submit Document Feedback Copyright © 2026 Texas Instruments Incorporated

Product Folder Links: TXG1041-Q1 TXG1042-Q1

9 Device and Documentation Support

9.1 Device Support

9.1.1 Regulatory Requirements

No statutory or regulatory requirements apply to this device. There are no special characteristics for this product.

9.2 Documentation Support

9.2.1 Related Documentation

For related documentation, see the following:

• Texas Instruments, Understanding Schmitt Triggers application report
• Texas Instruments, CMOS Power Consumption and Cpd Calculation application report

9.3 Receiving Notification of Documentation Updates

To receive notification of documentation updates, navigate to the device product folder on ti.com. Click on Notifications to register and receive a weekly digest of any product information that has changed. For change details, review the revision history included in any revised document.

9.4 Support Resources

TI E2E™ support forums are an engineer's go-to source for fast, verified answers and design help — straight from the experts. Search existing answers or ask your own question to get the quick design help you need. Linked content is provided "AS IS" by the respective contributors. They do not constitute TI specifications and do not necessarily reflect TI's views; see TI's Terms of Use.

9.5 Trademarks

TI E2E™ is a trademark of Texas Instruments. All trademarks are the property of their respective owners.

9.6 Electrostatic Discharge Caution

This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with appropriate precautions. Failure to observe proper handling and installation procedures can cause damage. ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more susceptible to damage because very small parametric changes could cause the device not to meet its published specifications.

9.7 Glossary

TI Glossary This glossary lists and explains terms, acronyms, and definitions. NOTE: Page numbers for previous revisions may differ from page numbers in the current version. Changes from Revision * (April 2025) to Revision A (January 2026) Page www.ti.com TXG1041-Q1, TXG1042-Q1 SCES986A – APRIL 2025 – REVISED JANUARY 2026 Copyright © 2026 Texas Instruments Incorporated Submit Document Feedback 33 Product Folder Links: TXG1041-Q1 TXG1042-Q1

April 2025 * Initial Release

11 Mechanical, Packaging, and Orderable Information

The following pages include mechanical, packaging, and orderable information. This information is the most current data available for the designated devices. This data is subject to change without notice and revision of this document. For browser-based versions of this data sheet, refer to the left-hand navigation. TXG1041-Q1, TXG1042-Q1 SCES986A – APRIL 2025 – REVISED JANUARY 2026 www.ti.com

34 Submit Document Feedback Copyright © 2026 Texas Instruments Incorporated

Product Folder Links: TXG1041-Q1 TXG1042-Q1

www.ti.com 5-Mar-2026 PACKAGING INFORMATION Orderable part number Status (1) Material type (2) Package | Pins Package qty | Carrier RoHS (3) Lead finish/ Ball material (4) MSL rating/ Peak reflow (5) Op temp (°C) Part marking (6) PTXG1041QDBQRQ1 Active Preproduction SSOP (DBQ) | 16 3000 | LARGE T&R - Call TI Call TI -40 to 125 PTXG1041QDYYRQ1 Active Preproduction SOT-23-THIN (DYY) | 14 3000 | LARGE T&R - Call TI Call TI -40 to 125 PTXG1041QRUCRQ1 Active Preproduction QFN (RUC) | 14 3000 | LARGE T&R - Call TI Call TI -40 to 125 PTXG1042QDBQRQ1 Active Preproduction SSOP (DBQ) | 16 3000 | LARGE T&R - Call TI Call TI -40 to 125 PTXG1042QDYYRQ1 Active Preproduction SOT-23-THIN (DYY) | 14 3000 | LARGE T&R - Call TI Call TI -40 to 125 PTXG1042QRUCRQ1 Active Preproduction QFN (RUC) | 14 3000 | LARGE T&R - Call TI Call TI -40 to 125 TXG1041QDYYRQ1 Active Production SOT-23-THIN (DYY) | 14 3000 | LARGE T&R Yes NIPDAU Level-1-260C-UNLIM -40 to 125 TXG141Q TXG1042QDYYRQ1 Active Production SOT-23-THIN (DYY) | 14 3000 | LARGE T&R Yes NIPDAU Level-1-260C-UNLIM -40 to 125 TXG142Q (1) Status: For more details on status, see our product life cycle. (2) Material type: When designated, preproduction parts are prototypes/experimental devices, and are not yet approved or released for full production. Testing and final process, including without limitation quality assurance, reliability performance testing, and/or process qualification, may not yet be complete, and this item is subject to further changes or possible discontinuation. If available for ordering, purchases will be subject to an additional waiver at checkout, and are intended for early internal evaluation purposes only. These items are sold without warranties of any kind. (3) RoHS values: Yes, No, RoHS Exempt. See the TI RoHS Statement for additional information and value definition. (4) Lead finish/Ball material: Parts may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead finish/Ball material values may wrap to two lines if the finish value exceeds the maximum column width. (5) MSL rating/Peak reflow: The moisture sensitivity level ratings and peak solder (reflow) temperatures. In the event that a part has multiple moisture sensitivity ratings, only the lowest level per JEDEC standards is shown. Refer to the shipping label for the actual reflow temperature that will be used to mount the part to the printed circuit board. (6) Part marking: There may be an additional marking, which relates to the logo, the lot trace code information, or the environmental category of the part. Multiple part markings will be inside parentheses. Only one part marking contained in parentheses and separated by a "~" will appear on a part. If a line is indented then it is a continuation of the previous line and the two combined represent the entire part marking for that device. Addendum-Page 1

www.ti.com 5-Mar-2026 Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. OTHER QUALIFIED VERSIONS OF TXG1041-Q1, TXG1042-Q1 :

• Catalog : TXG1041 , TXG1042 NOTE: Qualified Version Definitions:
• Catalog - TI's standard catalog product Addendum-Page 2

PACKAGE MATERIALS INFORMATION www.ti.com 6-Mar-2026 TAPE AND REEL INFORMATION Reel Width (W1) REEL DIMENSIONS A0B0K0WDimension designed to accommodate the component lengthDimension designed to accommodate the component thicknessOverall width of the carrier tapePitch between successive cavity centersDimension designed to accommodate the component width TAPE DIMENSIONSK0 P1B0WA0Cavity QUADRANT ASSIGNMENTS FOR PIN 1 ORIENTATION IN TAPE Pocket QuadrantsSprocket HolesQ1Q1Q2Q2Q3Q3Q4Q4User Direction of Feed P1ReelDiameter *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Reel Diameter (mm) Reel Width W1 (mm) (mm) (mm) (mm) (mm) W (mm) Pin1 Quadrant TXG1041QDYYRQ1 SOT-23- THIN TXG1042QDYYRQ1 SOT-23- THIN Pack Materials-Page 1

PACKAGE MATERIALS INFORMATION www.ti.com 6-Mar-2026 TAPE AND REEL BOX DIMENSIONS Width (mm) W LH *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) TXG1041QDYYRQ1 SOT-23-THIN DYY 14 3000 336.6 336.6 31.8 TXG1042QDYYRQ1 SOT-23-THIN DYY 14 3000 336.6 336.6 31.8 Pack Materials-Page 2

NOTES: 1. All linear dimensions are in millimeters. Any dimensions in parenthesis are for reference only. Dimensioning and tolerancing per ASME Y14.5M. 2. This drawing is subject to change without notice. 3. This dimension does not include mold flash, protrusions, or gate burrs. Mold flash, protrusions, or gate burrs shall not exceed 0.15 per side. 4. This dimension does not include interlead flash. Interlead flash shall not exceed 0.50 per side. 5. Reference JEDEC Registration MO-345, Variation AB PACKAGE OUTLINE 4224643/D 07/2024 www.ti.com SOT-23-THIN - 1.1 mm max height PLASTIC SMALL OUTLINE DYY0014A A 0.1 C B PIN 1 INDEX AREA 4.3 4.1 NOTE 3 2.1 1.9 3.36 3.16 14X 0.3 0.11

0.1 C A B

1.1 MAX

C SEATING PLANE 0.2

0.08 TYP

0.1 0.0 0.25 GAUGE PLANE 0°- 8° 0.63 0.33 DETAIL A TYP 12X 0.5 4X 4° - 15° 4X 0° - 15°

NOTES: (continued) 6. Publication IPC-7351 may have alternate designs. 7. Solder mask tolerances between and around signal pads can vary based on board fabrication site. EXAMPLE BOARD LAYOUT 4224643/D 07/2024 www.ti.com SOT-23-THIN - 1.1 mm max heightDYY0014A PLASTIC SMALL OUTLINE SYMM SYMM LAND PATTERN EXAMPLE EXPOSED METAL SHOWN SCALE: 20X 14X (0.3) 14X (1.05) (3) 12X (0.5) (R0.05) TYP 7 8 METAL SOLDER MASK OPENING SOLDER MASK OPENING METAL UNDER SOLDER MASK NON- SOLDER MASK DEFINED (PREFERRED) SOLDER MASK DEFINED SOLDER MASK DETAILS

NOTES: (continued) 8. Laser cutting apertures with trapezoidal walls and rounded corners may offer better paste release. IPC-7525 may have alternate design recommendations. 9. Board assembly site may have different recommendations for stencil design. EXAMPLE STENCIL DESIGN 4224643/D 07/2024 www.ti.com SOT-23-THIN - 1.1 mm max heightDYY0014A PLASTIC SMALL OUTLINE SOLDER PASTE EXAMPLE BASED ON 0.125 mm THICK STENCIL SCALE: 20X SYMM SYMM 14X (0.3) 14X (1.05) (3) 12X (0.5) (R0.05) TYP 7 8

www.ti.com PACKAGE OUTLINE C TYP-.244.228 -6.195.80[ ] .069 MAX [1.75] 14X .0250 [0.635] 16X -.012.008 -0.300.21[ ] .175 [4.45] TYP-.010.005 -0.250.13[ ] - 8 -.010.004 -0.250.11[ ] (.041 ) [1.04] .010 [0.25] GAGE PLANE -.035.016 -0.880.41[ ] A NOTE 3 -.197.189 -5.004.81[ ] B NOTE 4 -.157.150 -3.983.81[ ] SSOP - 1.75 mm max heightDBQ0016A SHRINK SMALL-OUTLINE PACKAGE 4214846/A 03/2014 NOTES: 1. Linear dimensions are in inches [millimeters]. Dimensions in parenthesis are for reference only. Controlling dimensions are in inches. Dimensioning and tolerancing per ASME Y14.5M. 2. This drawing is subject to change without notice. 3. This dimension does not include mold flash, protrusions, or gate burrs. Mold flash, protrusions, or gate burrs shall not exceed .006 inch, per side. 4. This dimension does not include interlead flash. 5. Reference JEDEC registration MO-137, variation AB. 1 16 .007 [0.17] C A B PIN 1 ID AREA SEATING PLANE .004 [0.1] C SEE DETAIL A DETAIL A TYPICAL SCALE 2.800

www.ti.com EXAMPLE BOARD LAYOUT .002 MAX [0.05] ALL AROUND .002 MIN [0.05] ALL AROUND (.213) [5.4] 14X (.0250 ) [0.635] 16X (.063) [1.6] 16X (.016 ) [0.41] SSOP - 1.75 mm max heightDBQ0016A SHRINK SMALL-OUTLINE PACKAGE 4214846/A 03/2014 NOTES: (continued) 6. Publication IPC-7351 may have alternate designs. 7. Solder mask tolerances between and around signal pads can vary based on board fabrication site. METAL SOLDER MASK OPENING NON SOLDER MASK DEFINED SOLDER MASK DETAILS OPENING SOLDER MASK METAL SOLDER MASK DEFINED LAND PATTERN EXAMPLE SCALE:8X SYMM 8 9 SEE DETAILS

www.ti.com EXAMPLE STENCIL DESIGN 16X (.063) [1.6] 16X (.016 ) [0.41] 14X (.0250 ) [0.635] (.213) [5.4] SSOP - 1.75 mm max heightDBQ0016A SHRINK SMALL-OUTLINE PACKAGE 4214846/A 03/2014 NOTES: (continued) 8. Laser cutting apertures with trapezoidal walls and rounded corners may offer better paste release. IPC-7525 may have alternate design recommendations. 9. Board assembly site may have different recommendations for stencil design. SOLDER PASTE EXAMPLE BASED ON .005 INCH [0.127 MM] THICK STENCIL SCALE:8X SYMM SYMM 8 9

www.ti.com GENERIC PACKAGE VIEW This image is a representation of the package family, actual package may vary. Refer to the product data sheet for package details. X2QFN - 0.4 mm max heightRUC 14 PLASTIC QUAD FLATPACK - NO LEAD2 x 2, 0.4 mm pitch 4229871/A

IMPORTANT NOTICE AND DISCLAIMER TI PROVIDES TECHNICAL AND RELIABILITY DATA (INCLUDING DATASHEETS), DESIGN RESOURCES (INCLUDING REFERENCE DESIGNS), APPLICATION OR OTHER DESIGN ADVICE, WEB TOOLS, SAFETY INFORMATION, AND OTHER RESOURCES “AS IS” AND WITH ALL FAULTS, AND DISCLAIMS ALL WARRANTIES, EXPRESS AND IMPLIED, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY RIGHTS. These resources are intended for skilled developers designing with TI products. You are solely responsible for (1) selecting the appropriate TI products for your application, (2) designing, validating and testing your application, and (3) ensuring your application meets applicable standards, and any other safety, security, regulatory or other requirements. These resources are subject to change without notice. TI grants you permission to use these resources only for development of an application that uses the TI products described in the resource. Other reproduction and display of these resources is prohibited. No license is granted to any other TI intellectual property right or to any third party intellectual property right. TI disclaims responsibility for, and you fully indemnify TI and its representatives against any claims, damages, costs, losses, and liabilities arising out of your use of these resources. TI’s products are provided subject to TI’s Terms of Sale, TI’s General Quality Guidelines, or other applicable terms available either on ti.com or provided in conjunction with such TI products. TI’s provision of these resources does not expand or otherwise alter TI’s applicable warranties or warranty disclaimers for TI products. Unless TI explicitly designates a product as custom or customer-specified, TI products are standard, catalog, general purpose devices. TI objects to and rejects any additional or different terms you may propose. IMPORTANT NOTICE Copyright © 2026, Texas Instruments Incorporated Last updated 10/2025