PTV111 BOURNS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Features

Applications

n Amplifiers/mixers/drum machines/ synthesizers n PCs/monitors n Appliances

Electrical Characteristics

Standard Resistance Tolerance ....±20% Standard Nominal Resistance Value Environmental Characteristics Maximum Operating Voltage 50V AC, 20V DC Physical Characteristics Stop- End Strength Rotational Life ....10,000 cycles minimum within 3 seconds Product Dimensions PTV111-4 RECOMMENDED PCB LAYOUT SHAFT SHOWN IN CCW POSITION 3.5 (.137) 2.0 – 0.15 (.078 – .005) L F 4.5 (.177 )+0 -0.019 -0.5 6.0 (.236 )+0 -0.019 -0.5 0.5 (.019) 0.5 (.019) 1.5 (.059) 30° 6.7 (.263) 11.0 (.433) 12.0 (.472) 8.5 (.334) 10.0 (.393) 11.0 (.433) 3.2 (.125) TERMINAL DETAIL 0.8 +0.1 -0.1 (.031 )+0.003 -0.003 DIA. HOLES 4 PLCS. 1.0 +0.2 -0.0 (.039 )+0.007 -0.0 7.5 (.295) 2.5 (.098) 2.1 +0.1 -0.0 (.082 )+0.003 -0.0 1 2 3 4 13.0 (.511) 2.0 -0.0 (.078 )+0.003 -0.0 11.0 (.433) L 20 25 (.787) (.984) F 71 2 (.275) (.472) Dimensions Without Bushing 12 3 MODEL PTV 111 MODEL PTT 111 DUMMY 12 3 4 Electrical Diagrams DIMENSIONS ARE: METRIC (INCHES)

S ecifications ar e s bject to change itho t notice 227 PTV111/PTT111 - 11mm Potentiometer Product Dimensions PTV111-1 DIA. HOLES 4 PLCS. RECOMMENDED PCB LAYOUT SHAFT SHOWN IN CCW POSITION 1.0 +0.2 -0.0 (.039 )+0.007 -0.0 3.3 (.129) 7.5 (.295) 2.5 (.098) 2.1 +0.1 -0.0 (.082 )+0.003 -0.0 1 2 3 4 10.2 (.401) 2.0 +0.1 -0.0 (.078 )+0.003 -0.0 L F M9x0.75 0.5 (.019) 1.5 (.059) 0.5 (.019) 4.5 (.177 )+0 -0.019 -0.5 6.0 (.236 )+0 -0.019 -0.5 10.0 (.393) 5.0 (.196) 7.5 (.295) 2.6 (.102) 2.0 (.078) 3.5 (.137) 3.3 (.129) 3.2 (.125) 30° 6.7 (.263) 12.0 (.472)8.0 +0.0 -0.2 (.314 )+0.0 -0.0007 5.4 (.212) 8.0 (.315) 10.9 (.429) 1.6 (.062) 9.4 (.370) 0.8 +0.1 -0.1 (.031 )+0.003 -0.003 PTV111-3 L F M9x0.75 5.0 (.196) 7.5 (.295) 10.0 (.393) 2.0 (.078) 0.5 (.019) 0.5 (.019) 1.5 (.059) 4.5 (.177 )+0 -0.019 -0.5 6.0 (.236 )+0 -0.019 -0.5 3.5 (.137) 3.2 (.125) RECOMMENDED PCB LAYOUT SHAFT SHOWN IN CCW POSITION 30° 6.7 (.263) 8.0 +0.0 -0.2 (.314 )+0.0 -0.0007 5.4 (.212) 8.0 (.315) 10.9 (.429) 12.0 (.472) 11.0 (.433) TERMINAL DETAIL 0.8 +0.1 -0.1 (.031 )+0.003 -0.003 DIA. HOLES 4 PLCS. 1.0 +0.2 -0.0 (.039 )+0.007 -0.0 7.5 (.295) 2.5 (.098) 2.1 +0.1 -0.0 (.082 )+0.003 -0.0 1 2 3 4 13.0 (.511) 2.0 -0.0 (.078 )+0.003 -0.0 11.0 (.433) How To Order PTV111 - 2 4 20 A - B 104 Model (See Diagrams)

  • PTV111 Standard
  • PTT111 With Tap Pin Style PC Pins vertical/ Down Facing:
  • 1 = With Bushing
  • 2 = No Bushing PC Pins horizontal/ Rear Facing:
  • 3 = With Bushing
  • 4 = No Bushing Center Detent Option
  • 4 = No Detent
  • 2 = Center Detent Standard Shaft Length
  • 15 = 15mm
  • 20 = 20mm
  • 25 = 25mm Shaft Styles
  • A = Flat Type Insulated Shaft Resistance Taper
  • A = Audio Taper
  • B = Linear Taper Resistance Code (See Table) Other styles available. Standard Resistance Table Resistance Resistance (Ohms) Code 1,000 102 2,000 202 5,000 502 10,000 103 20,000 203 50,000 503 100,000 104 200,000 204 500,000 504 1,000,000 105 L 15 20 (.590) (.787) F 7 12 (.275) (.472) Dimensions With Bushing