PTRM PICKER | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

FEATURES

PTR relay with magnetic blowout Up to 45 amp switching capacity QC on top and PCB on bottom Up to 3 horsepower rating UL Class B insulation standard UL Class F insulation available PTRM Meets UL 873 spacing Load Type General Purpose Resistive Motor LRA/FLA Tungsten Ballast Pilot Lamp 125-250 VAC Voltage

240 VAC

28 VDC

120 VAC

277 VAC

(SPST-NO) 45 A 45 A 30 A 3 HP 1.5 HP

120 A/45 A

147 A/33 A

0.75 HP 0.375 HP

45 A/15 A

4.5 A

1 Form C (SPDT)

30 A 15 A

2HP 0.75 HP 1.5 HP 0.375 HP 70 A/30 A 30 A/10.5 A TV8 TV4 15 A 4.5 A UL/CSA RATINGS CONTACT DATA Material Initial Contact Resistance Service Life Mechanical Electrical AgCdO (Silver Cadmium Oxide), AgSnOInO (Silver Tin Oxide Indium Oxide) 50 milliohms max @ 0.1A, 6VDC

1 X 107

1 X 104

Operate Time 15 ms. typical Release Time Insulation Resistance 10 ms. typical 1,000 megohms min, at 500VDC, 50%RH Dielectric Strength 1500 Vrms, 1 min. between open contacts 1500 Vrms, 1 min. between coil and contacts Shock Resistance 10 g, 11ms, functional; 100 g, destructive Vibration Resistance DA 1.5mm, 10-55 Hz Power Consumption 1W, approx. Ambient Temperature Range -55 degrees C to 85 degrees C operating for class B, -40 to 130 degrees C storage Weight 32 grams approx. Operations Operations Sales: Toll Free (888) 997-3933 Fax (818) 342-5296 email: pickerwest@sbcglobal.net URL: www.pickercomponents.com File # E93379 Certificate # LR 109231

3220 Commander Drive, Suite 102, Carrollton, Texas 75006

Power PCB Relay With Magnetic BlowoutNEW

1 Form A

(SPST-NC)

1 Form B

Epoxy sealed, immersion cleanable (locked rotor amps/full load amps) 45 A/15 A 70 A/30 A 30 A/10.5 A PAGE 1

ORDERING INFORMATION

Example: PTRM Model -12 Coil Voltage -1C Contact Form 1A, 1B, or 1C Insulation Class Nil: UL Class B; F: UL Class F COIL DATA Coil Voltage 110 Resistance ohms + 10% Must Operate Voltage Max. (VDC) Must Release Voltage Min. (VDC) Continuous Voltage Max. (VDC) 155 660 2560 10330 3.75 4.50 6.75 9.00 18.00 36.00 82.50 0.5 0.6 0.9 1.2 2.4 4.8 11.0 5.5 6.6 9.9 13.2 26.4 52.8 121.0 .250 Ref. (6.35) .440 (11.2) .300 (7.6) .600 (15.2) .500 .150 (3.81) .550 (13.97) .700 (17.78) (12.7) NO NC COM Pin Layout Bottom View (32.2) 1.27 1.10 (28.0) (27.5) 1.08 Overall Dimensions Inches (millimeters) Sales: Call Toll Free (888) 997-3933 Fax (818) 342-5296 email: pickerwest@sbcglobal.net URL: pickercomponents.com max max max Top terminals .250 in. male QC Remove sealing tape after flux removal PAGE 2 Tolerances + .010 unless otherwise noted Holes for Coil term. .043 F