PTRE PICKER | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

3220 Commander Drive, Suite 102 Carrollton, TX 75006 www.PickerComponents.com Sales: (972) 713-6272 (888) 997-3933 Fax: (972)735-0964 e-mail: sales@pickercomponents.com Dimensions are listed for reference purposes only. Specifications and Availability subject to change without notice. PTRE Rev C 7/30/15 1 of 2

50 Amp Power PCB Relay PTRE

FEATURES

 Most Popular Power PCB Relay Footprint - T90  50 Amp 240 VAC General Purpose UL Rating  2 HP 250 VAC Rating  UL Class F Insulation Standard  Meets UL 508 and UL 873 Spacing with Pin 6 Omitted  Epoxy Sealed, Immersion Cleanable  RoHS Compliant CONTACT DATA Material AgSnO2 Initial Contact Resistance 30 mΩ Max. @ 1 A, 6 VDC Maximum Switching Voltage 110 VDC, 300 VAC Maximum Switching Current 50 A Maximum Switching Power 1,500 W, 12,000 VA Service Life Mechanical 1 X 107 Operations Electrical 5 X 104 Operations Load Type Voltage 1 Form A (SPST-NO)

1 Form C (SPDT) 1 Form B

(SPST-NC) NO NC Resistive 6,000 Cycles

240 VAC

30 VDC 50 A 35 A 50 A 35 A

3,000 Cycles 240 VAC TV-5 — TV-5 — Electric Ballast 6,000 Cycles 280 VAC 5 A — 5 A — Motor Load 3,000 Cycles 250 VAC 2 HP 1.5 HP 2 HP 1.5 HP CHARACTERISTIC Operate Time 15 ms Max. Release Time 10 ms Max Insulation Resistance 1,000 MΩ min, at 500 VDC Dielectric Strength

50 Hz 2,500 V 1 Min Between Coil and Contacts

4,000 V without Pin 6 50 Hz 1,500 V 1 min. Between Contacts Shock Resistance 200 m/s2, 11 ms Vibration Resistance 10 - 55 Hz Double Amplitude Terminal Strength 10N Power Consumption 1.5 W

ORDERING INFORMATION

Solderability 235ºC ± 2°C 3 ± 0.5 s Operating Temperature Range - 55°C to 100°C Storage Temperature Range - 40°C to 155°C Relative Humidity 85% (at 40°C) Weight 30 g, 27 g Open Type Material Compliant To EU RoHS V2, EU REACH V3 FACTORY RATINGS Load Type Voltage 1 Form C (SPDT) Cycles NO NC General Purpose (Resistive)

240 VAC/30 VDC

10,000 50.000 With Pin 6 Omitted (-1) Meets UL 508 and UL 873 Spacing - 3.18 mm Through Air, 6.36 mm Over Surface. With Pin 6 Meets UL508 at 40°C Example: PTRE -1C -12 S T F -X Model: PTRE Contact Form: 1A or 1C Coil Voltage: 3, 5, 6, 9, 12, 15, 18, 24, 48, 110 Configuration: Nil: Open Frame; S: Sealed; C: Covered E: Epoxy Sealed not Water Washable Contact Material: T: AgSnO2 Insulation Material: F: UL Class F Spacing: Nil: UL 508; -1: UL 508 and 873 (Pin # 6 omitted) ROHS Compliant: -X Box Quantity: 600; Inner Box 300

3220 Commander Drive, Suite 102 Carrollton, TX 75006 www.PickerComponents.com Sales: (972) 713-6272 (888) 997-3933 Fax: (972)735-0964 e-mail: sales@pickercomponents.com Dimensions are listed for reference purposes only. Specifications and Availability subject to change without notice. PTRE Rev C 7/30/15 2 of 2 PTRE PTRE DIMENSIONS (mm/inches) COIL DATA Coil Voltage Resistance (Ohms ± 10%) Must Operate Voltage Max (VDC) Must Release Voltage Min. (VDC) Coil Power (W) Rated Max 3 3.9 6.0 2.25 0.3 1.5 5 6.5 16.7 3.75 0.5 6 7.8 24.0 4.50 0.6 9 11.7 54.0 6.75 0.9 12 15.6 96.0 9.00 1.2 15 19.5 150 10.25 1.5 18 23.4 216 13.50 1.8 24 31.2 384 18.00 2.4 48 62.4 1,536 36.00 4.8 110 143 8,067 82.50 11.0 NOTES: The use of any coil voltage less that the rated voltage will compromise the operation of the relays. Must Operate Voltage is listed for test purposes only and is not to be used as design criteria. Pickup and release voltages are for test purposes only and are not to be used as design criteria. Dimensions are in mm, Inches are listed for reference only. Knock off, on top corner, nib for ventilation after soldering and water wash. -1 Pin 6 Omitted With Pin 6