DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
3220 Commander Drive, Suite 102 Carrollton, TX 75006 www.PickerComponents.com Sales: (972) 713-6272 (888) 997-3933 Fax: (972)735-0964 e-mail: sales@pickercomponents.com Dimensions are listed for reference purposes only. Specifications and Availability subject to change without notice. PTRD Rev D 5/21/15 1 of 2
40 Amp Power PCB Relay PTRD
Material AgSnO2, AgSnO2 Initial Contact Resistance 50 MΩ Max. @ 1 A, 6 VDC Service Life Mechanical 1 X 107 Operations Electrical 5 X 104 Operations Maximum Switching Voltage 110 VDC, 300 VAC Maximum Switching Current 40 A Maximum Switching Power 1,500 W, 12,000 VA
FEATURES
Most Popular Power PCB Relay Footprint - T90 40 Amp 250 VAC General Purpose UL Rating 2 HP 250 VAC Rating UL Class F Insulation Standard Gold Flashed Contacts Available Meets UL 508 and UL 873 Spacing with Pin 6 Omitted Epoxy Sealed, Immersion Cleanable RoHS Compliant Load Type Voltage 1 Form A (SPST-NO)
1 Form B
(SPDT-NC)
1 Form C
120 VAC 40 A 30 A 40 A 30 A
250 VAC 40 A 30 A 40 A 30 A
30 VDC 40 A 30 A 40 A 30 A
(100.000 Cycles)
120 VAC 30 A 20 A 30 A 20 A
250 VAC 30 A 20 A 30 A 20 A
(30,000 Cycles)
240 VAC 2 HP —— 2 HP ——
120 VAC 1 HP —— 1 HP ——
240 VAC 80 A/30 A —— 80 A/30 ——
120 VAC 96 A/30 A —— 96 A/30 —— LRA/FLA
277 VAC 30 A 20 A 30 A 20 A
Operate Time Less than 15 ms Release Time Less than 10 ms Insulation Resistance 1,000 MΩ min, at 500 VDC, 50% RH Dielectric Strength
50 Hz 2,500 V 1 Min Between Coil and Contacts
4,000 V without Pin 6 50 Hz 1,500 V 1 min. Between Contacts Shock Resistance 200 m/s, 11 ms Power Consumption 0.9 W, 0.6 W
ORDERING INFORMATION
Vibration Resistance 10 - 55 Hz Double Amplitude Terminal Strength 10N Solderability 235 ºC for 3 secs Operating Temperature Range - 40°C to 125°C Storage Temperature Range - 40°C to 155°C Relative Humidity 85% (at 40°C) Weight 13.5 gr Approximately Meterial Compliant To EU RoHS V2, EU REACH V3 CHARACTERISTIC Continued Example: PTRD -1C -12 S -1 -X Model: PTRD Contact Form: 1A, 1B, 1C Coil Voltage: 3, 5, 6, 9, 12, 15, 24, 28, 48, 110 Enclosure: Nil: Open Frame; S: Sealed; E: Covered C: Dust Cover Contact Material: Nil: AgCdO; T: AgSnO2 Spacing: Nil: UL508; -1: UL 508 and UL 873 (Pin #6 Omitted) RoHS Compliant: -X Box Quantity: 600; Inner Box 300 With Pin 6 OmiƩed (‐1) Meets UL 508 and UL 873 Spacing ‐ 3.18 mm Through Air, 6.36 mm Over Surface. With Pin 6 Meets UL508
3220 Commander Drive, Suite 102 Carrollton, TX 75006 www.PickerComponents.com Sales: (972) 713-6272 (888) 997-3933 Fax: (972)735-0964 e-mail: sales@pickercomponents.com Dimensions are listed for reference purposes only. Specifications and Availability subject to change without notice. PTRD Rev D 5/21/15 2 of 2 PTRD PTRD COIL DATA Coil Voltage Coil Power (W) Coil Power (W) Must Release Voltage Min 6 7.8 60 40 33 4.50 4.8 0.6 12 15.6 240 150 131 9.00 9.6 1.2 24 31.2 960 640 524 18.00 19.2 2.4 48 62.4 3840 2560 2095 36.00 38.4 4.8 110 143 20167 13445 ——- 82.50 ——- 11.0 Resistance (Ohms ± 10%) Must Operate Voltage Max (VDC) 28 36.4 1307 871 713 21.0 22.4 2.8 5 mm SPDT 12 Amp 3.5 mm SPDT 12 Amp DIMENSIONS (mm/inches) NOTES: The use of any coil voltage less that the rated voltage will compromise the operation of the relays. Must Operate Voltage is listed for test purposes only and is not to be used as design criteria. Pickup and release voltages are for test purposes only and are not to be used as design criteria. Dimensions are in mm, Inches are listed for reference only. Available with Pin 6 UL508 or Without Pin 6 UL873 (‐1) Knock off, on top corner, nib for ventilation after soldering and water wash. (‐1)