PTR060V0010 COOPER | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
60 Volt DC Radial Leaded, PolyTron™ PTC Devices
PolyTron™ PTR060V Series
0111 BU-SB11020 Page 1 of 4 Data Sheet 4401
Description
- PolyTron™ radial leaded thru-hole PTC device Maximum 60 volts Current ratings from 0.10 to 3.75 amps Fast time-to-trip Low resistance Halogen free Lead free RoHS compliant Notes: I hold – Hold current: Maximum current device will pass without interruption in 23°C still air. Itrip – Trip current: Minimum current that will switch the device from low resistance to high resistance in 23°C still air. Vmax: Maximum continuous voltage device can withstand without damage at rated current. Imax: Maximum fault current device can withstand without damage at rated voltage. Pd: Power dissipated from device when in the tripped state in 23°C still air. Ri (min.): Minimum resistance of device as supplied at 23°C unless otherwise specified. Ri (max.): Maximum resistance of device as supplied at 23°C unless otherwise specified. R1(max.): Maximum resistance of device when measured one hour post reflow (SMD) or one hour post trip (radial-leaded device) at 23 °C unless otherwise specified. Specifications Ihold Itrip Pd Time to Resistance ( Ω) Agency Catalog V max Imax @23°C @23°C Typ. Trip (Max.) Initial (R i) Post Trip (R 1) Information Number (Vdc) (Amps) (Amps) (Amps) (W) (Amps) (Sec) Min. Max. Max. cURus TUV Agency Information cURus: Recognized Card: File E343021 (I hold 0.1-3.75A) TUV File: J 50194729 Part Number System/Ordering PT R 060V 0160 -TR PolyTron™ PTC Device Series Radial Leaded Maximum Voltage Current Holding (Ihold) Tape and Reel Packaging and Lead Type Code Lead Codes: TR & BK - Straight Leads, TR1 & BK1 - Kinked Leads TR & TR1 On Reels BK & BK1 In Poly Bags 0.17 - 2,500A devices 0.30-1.85A - 500 devices 0.50-0090A - 2000 devices 2.50-3.75A - 250 devices 1.10-1.85A - 1500 devices 2.50-3.75A - 1000 devices
Applications
Medical equipment White goods Industrial power transmission Telecommunications Computers and peripherals Consumer and automotive electronics Rechargeable battery packs HALOGEN HFFREEPb
0111 BU-SB11020 Page 2 of 4 Data Sheet 4401
Part A Straight Kink D E Straight Kink Number Max. (-TR) (-TR1) C Min. Max. F TR TR1 Time-to-Trip Curves at 23°C 0.001 0.01 0.1 100 1000 0.1 1 10 100 TIME IN SECONDS Faul t C ur r ent ( A) A:PTR060V0010 B:PTR060V0017 C :PTR060V0020 D :PTR060V0025 E:PTR060V0030 F :PTR060V0040 G :PTR060V0050 H :PTR060V0065 I:PTR060V0075 J :PTR060V0090 K:PTR060V0110 L:PTR060V0135 M :PTR060V0160 N :PTR060V0185 O :PTR060V0250 P:PTR060V0300 Q :PTR060V0375 A B C D E F G H I J K L M N O P Q
0111 BU-SB11020 Page 3 of 4 Data Sheet 4401
Recommended Wave Solder Profile. Material Composition Lead material: - PTR060V0010-PTR060V0040 Tin-plated copper clad steel - PTR060V0050-PTR060V0375 Tin-plated copper Insulating material: Cured epoxy resin meeting UL 94V0 requirements Note 1 Note 3 Note 2 CoolingSoldering 130 ± 200°C Tamb t Time Temperature Preheating 30~90sec <1sec <10sec 260°C max 0.0 20.0 40.0 60.0 80.0 100.0 120.0 140.0 160.0 180.0 - 4 0 - 2 0 0 2 04 06 08 0 Percentage of Derated Current Tem perature (°C) Thermal Derating Curve Recommended Reworking Conditions with Soldering Iron Soldering Iron Tip Temperature: 360°C max. Solder Time: 3 seconds max. Distance from Thermistor: 2mm min. Notes: 1. (1-3)°C/sec 2. Approximately 200°C/sec 3. 5°C/sec Maximum Environmental Specifications Characteristic Value Operating Temperature Range -40°C to +85°C Surface Temperature Trip State 125°C max. Thermal Shock +85°C to -40°C , 10 cycles, 5% typical resistance change Solvent Resistance MIL-STD-202 Method 215, no change Humidity Age Test +85°C, 85% R.H., 1000 hours ±5% typical resistance change. Specified temperature (23°C ± 3°C) Storage Temperature Range -10°C to +40°C Storage Duration One year Storage Relative Humidity < _75% Storage Conditions Keep away from corrosive atmosphere and sunlight
© 2011 Cooper Bussmann www.cooperbussmann.com
0111 BU-SB11020 Page 4 of 4 Data Sheet 4401
The only controlled copy of this Data Sheet is the electronic read-only version located on the Cooper Bussmann Network Drive. Al l other copies of this document are by definition uncontrolled. This bulletin is intended to clearly present comprehensive product data and provide technical information that will help the end user with desig n applications. Cooper Bussmann reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Cooper Bussmann also reserves t he right to change or update, without notice, any technical information con- tained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications. Life Support Policy: Cooper Bussmann does not authorize the use of any of its products for use in life support devices or system s without the express written approval of an officer of the Company. Life sup- port systems are devices which support or sustain life, and whose failure to perform, when properly used in accordance with instr uctions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. Packaging/Taping Specifications IEC Dimension Tolerance Description Mark (mm) (mm) Sprocket hole pitch P0 12.7 0.3 Ordinate to adjacent component lead PTR060V0010~PTR060V0090 P 1 3.6 ±1.0 Ordinate to adjacent component lead PTR060V0110~PTR060V0185 P 1 3.45 ±1.0 Ordinate to adjacent component lead PTR060V0250~PTR060V0300 P 1 7.3 ±1.0 Device pitch PTR060V0010~PTR060V0090 P 12.7 ±1.0 Device pitch PTR060V0110~PTR060V0300 P 25.4 ±1.0 Device pitch PTR060V0375 P 38.1 ±1.0 Lead spacing C * -- Carrier tape width W 18 ±1.0 Top distance between tape edges W 0 3.0 Max. Hold-down tape width W 1 12 ±1.0 Sprocket hole position W 2 9.0 +0.75/-0.5 Abscissa to top PTR060V0010~PTR060V0090 H 1 32.2 Max. Abscissa to top PTR060V0110~PTR060V0300 H 1 47.5 Max. Abscissa to plane (straight lead) H 18.0 +2/-0 Abscissa to plane (kinked lead) H 0 16.0 ±0.5 Sprocket hole diameter D 0 4 ±0.2 Lead protrusion L 1 1 Max. Tape thickness t 0.9 Max. Body lateral deviation Δh 0 ±1.0 Body tape plane deviation Δp 0 ±1.3 Reel width W 3 56 Max. Reel diameter 340 ±10 Arbor hole diameter n 0 31 ±1 Core diameter n 80 Min. * See Dimensions table. Figure 2 - PTR060V0250-PTR060V0375 Figure 1 - PTR060V0010-PTR060V0185 Reel Specifications