TPD1E05U06_V01 TI | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 36
Technical content
TPDxE05U06 1, 4, 6 Channel ESD Protection Device for Super-Speed (Up to 6 Gbps) Interface
1 Features
- IEC 61000-4-2 level 4 ESD protection – ±12-kV contact discharge – ±15-kV air gap discharge
- IEC 61000-4-4 EFT protection – 80 A (5/50 ns)
- IEC 61000-4-5 surge protection – 2.5 A (8/20 µs)
- IO capacitance 0.42 pF to 0.5 pF (typical)
- DC breakdown voltage 6.5 V (minimum)
- Ultra low leakage current 10 nA (maximum)
- Low ESD clamping voltage
- Industrial temperature range: –40°C to +125°C
- Easy straight-through routing packages
- Industry standard SOD-523 package (0.8 mm × 1.2 mm)
2 Applications
- HDMI 1.4b
- HDMI 2.0
- USB 3.0
- MHL
- LVDS interfaces
- DisplayPort
- PCI-express®
- eSata interfaces
- V-by-One® HS
3 Description
The TPDxE05U06 is a family of unidirectional Transient Voltage Suppressor (TVS) based Electrostatic Discharge (ESD) protection diodes with ultra-low capacitance. Each device can dissipate ESD strikes above the maximum level specified by the IEC 61000-4-2 international standard. The TPDxE05U06s ultra-low loading capacitance makes it ideal for protecting any high-speed signal pins. Typical applications for TPDxE05U06 includes high speed signal lines in HDMI 1.4 b, HDMI 2.0, USB 3.0, MHL, LVDS, DisplayPort, PCI-Express®, eSata, and V-by-One® HS. Device Information(1) PART NUMBER PACKAGE BODY SIZE (NOM) TPD1E05U06 X1SON (2) 0.60 mm × 1.00 mm SOD-523 (2) 0.80 mm × 1.20 mm TPD4E05U06 USON (10) 2.50 mm × 1.00 mm TPD6E05U06 USON (14) 3.50 mm × 1.35 mm (1) For all available packages, see the orderable addendum at the end of the data sheet. 3 8 3 8 Connector HDMI Controller TPD4E05U06 TPD4E05U06 D0- D1+ D1- D2+ D2- CLK+ CLK- D0+ GND GND GND GND Simplified Schematic D1+ D1- D2+ D2- GND TPD4E05U06 Functional Block Diagram TPD1E05U06, TPD4E05U06, TPD6E05U06 SLVSBO7M – DECEMBER 2012 – REVISED DECEMBER 2021 An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications, intellectual property matters and other important disclaimers. PRODUCTION DATA.
11.2 Receiving Notification of Documentation Updates.. 19
12 Mechanical, Packaging, and Orderable
4 Revision History
NOTE: Page numbers for previous revisions may differ from page numbers in the current version. Changes from Revision L (January 2017) to Revision M (December 2021) Page Changes from Revision K (November 2016) to Revision L (January 2017) Page Changes from Revision J (March 2016) to Revision K (November 2016) Page Changes from Revision I (June 2015) to Revision J (March 2016) Page Changes from Revision H (May 2015) to Revision I (June 2015) Page Changes from Revision G (July 2014) to Revision H (May 2015) Page TPD1E05U06, TPD4E05U06, TPD6E05U06 SLVSBO7M – DECEMBER 2012 – REVISED DECEMBER 2021 www.ti.com
2 Submit Document Feedback Copyright © 2021 Texas Instruments Incorporated
Product Folder Links: TPD1E05U06 TPD4E05U06 TPD6E05U06
Changes from Revision F (November 2013) to Revision G (July 2014) Page Changes from Revision * (December 2012) to Revision A (December 2012) Page Changes from Revision A (December 2012) to Revision B (January 2013) Page Changes from Revision B (January 2013) to Revision C (March 2013) Page Changes from Revision C (March 2013) to Revision D () Page Changes from Revision D (August 2013) to Revision E (November 2013) Page www.ti.com TPD1E05U06, TPD4E05U06, TPD6E05U06 SLVSBO7M – DECEMBER 2012 – REVISED DECEMBER 2021 Copyright © 2021 Texas Instruments Incorporated Submit Document Feedback 3 Product Folder Links: TPD1E05U06 TPD4E05U06 TPD6E05U06
5 Pin Configuration and Functions
Figure 5-1. DPY Package 2-Pin X1SON Top View 1 2 ID Area Figure 5-2. DYA Package 2-Pin SOD-523 Top View Table 5-1. Pin Functions TPD1E05U06 DPY and DYA PIN TYPE DESCRIPTION NAME NO. GND 2 Ground Ground; Connect to ground I/O 1 I/O ESD protected channel(1) (1) Place as close to the connector as possible. 1D1+ 5 6 D1– GND D2+ D2– NC NC GND NC NC Figure 5-3. DQA Package 10-Pin USON Top View Table 5-2. Pin Functions TPD4E05U06 DQA PIN TYPE DESCRIPTION NAME NO. D1+ 1 I/O ESD protected channel(1) D1– 2 I/O ESD protected channel(1) D2+ 4 I/O ESD protected channel(1) D2– 5 I/O ESD protected channel(1) GND 3 Ground Ground; Connect to ground GND 8 NC 6 — Not connected; Used for optional straight-through routing. Can be left floating or grounded NC 7 NC 9 NC 10 (1) Place as close to the connector as possible. TPD1E05U06, TPD4E05U06, TPD6E05U06 SLVSBO7M – DECEMBER 2012 – REVISED DECEMBER 2021 www.ti.com
4 Submit Document Feedback Copyright © 2021 Texas Instruments Incorporated
Product Folder Links: TPD1E05U06 TPD4E05U06 TPD6E05U06
D1– D2+ D2– GND D3+ D3– 1 1 Figure 5-4. RVZ Package 14-Pin USON Top View Table 5-3. Pin Functions TPD6E05U06 RVZ PIN TYPE DESCRIPTION NAME NO. D1+ 14 I/O ESD protected channel(1) D1– 13 I/O ESD protected channel(1) D2+ 12 I/O ESD protected channel(1) D2– 11 I/O ESD protected channel(1) D3+ 9 I/O ESD protected channel(1) D3– 8 I/O ESD protected channel(1) GND 5 Ground Ground; Connect to ground GND 10 NC 1 — Not connected; Used for optional straight-through routing. Can be left floating or grounded NC 2 NC 3 NC 4 NC 6 NC 7 (1) Place as close to the connector as possible. www.ti.com TPD1E05U06, TPD4E05U06, TPD6E05U06 SLVSBO7M – DECEMBER 2012 – REVISED DECEMBER 2021 Copyright © 2021 Texas Instruments Incorporated Submit Document Feedback 5 Product Folder Links: TPD1E05U06 TPD4E05U06 TPD6E05U06
6 Specifications
over operating free-air temperature range (unless otherwise noted) (1) MIN MAX UNIT Electrical Fast Transient Peak Pulse (2) (3) IEC 61000-4-5 Current (8/20us) 2.5 A IEC 61000-4-5 Power (8/20us) 40 W TA Ambient Operating Temperature -40 125 °C Tstg Storage Temperature -65 155 °C (1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, which do not imply functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating Conditions. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. (2) Voltages are with respect to GND unless otherwise noted. (3) Measured at 25℃
6.1 ESD Ratings—JEDEC Specification
V(ESD) Electrostatic discharge – DPY, DQA, and RVZ Human body model (HBM), per ANSI/ESDA/ JEDEC JS-001 (1) ±4000 V Charged device model (CDM), per JEDEC specification JESD22-C101 (2) ±1500 V V(ESD) Electrostatic discharge – DYA Human body model (HBM), per ANSI/ESDA/ JEDEC JS-001 ±2500 V Charged device model (CDM), per JEDEC specification JS-002 ±1000 V (1) JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process. Manufacturing with less than 500-V HBM is possible with the necessary precautions. Pins listed as ±4000 V may actually have higher performance. (2) JEDEC document JEP157 states that 250-V CDM allows safe manufacturing with a standard ESD control process. Manufacturing with less than 250-V CDM is possible with the necessary precautions. Pins listed as ±1500 V may actually have higher performance.
6.2 ESD Ratings—IEC Specification
V(ESD) Electrostatic discharge IEC 61000-4-2 contact discharge ±12000 V IEC 61000-4-2 air-gap discharge ±15000 Recommended Operating Conditions over operating free-air temperature range (unless otherwise noted) MIN NOM MAX UNIT VIO Input pin voltage 0 5.5 V TA Operating free-air temperature -40 125 °C TPD1E05U06, TPD4E05U06, TPD6E05U06 SLVSBO7M – DECEMBER 2012 – REVISED DECEMBER 2021 www.ti.com
6 Submit Document Feedback Copyright © 2021 Texas Instruments Incorporated
Product Folder Links: TPD1E05U06 TPD4E05U06 TPD6E05U06
6.3 Thermal Information
THERMAL METRIC (1) TPD1E05U06 TPD4E05U06 TPD6E05U06 UNITDPY (X1SON) DYA (SOD523) DQA (USON) RVZ (USON)
2 PINS 2 PINS 10 PINS 14 PINS
RθJA Junction-to-ambient thermal resistance 697.3 772.1 327 197.9 °C/W RθJC(top) Junction-to-case (top) thermal resistance 471 444.6 189.5 119.1 °C/W RθJB Junction-to-board thermal resistance 575.9 540.4 257.7 92.6 °C/W ΨJT Junction-to-top characterization parameter 175.7 159.9 60.9 22 °C/W ΨJB Junction-to-board characterization parameter 575.1 533.9 257 91.6 °C/W (1) For more information about traditional and new thermal metrics, see the Semiconductor and IC Package Thermal Metrics application report.
6.4 Electrical Characteristics
over operating free-air temperature range (unless otherwise noted) PARAMETER TEST CONDITION MIN TYP MAX UNIT INPUT - OUTPUT RESISTANCE VRWM Reverse stand-off voltage IIO < 10µA 5.5 V VBR Break-down voltage IIO = 1 mA 6.5 8.5 V VClamp Clamp voltage IPP = 1 A, TLP, from I/O to GND (1) 10 V IPP = 5 A, TLP, from I/O to GND (1) 14 IPP = 1 A, TLP, from GND to I/O (1) 3 IPP = 5 A, TLP, from GND to I/O (1) 7 ILEAK Leakage current VIO = 2.5V 0.01 10 nA RDYN Dynamic resistance DPY package I/O to GND (2) 0.8 Ω GND to I/O (2) 0.8 DYA package I/O to GND (2) 0.8 GND to I/O (2) 0.7 DQA package I/O to GND (2) 0.8 GND to I/O (2) 0.8 RVZ package I/O to GND (2) 0.8 GND to I/O (2) 0.8 CAPACITANCE CL Line capacitance (3) VIO = 2.5 V; ƒ = 1 MHz , I/O to GND TPD1E05U06 DPY package 0.42 pF TPD1E05U06 DYA package 0.42 TPD4E05U06 DQA package 0.5 TPD6E05U06 RVZ package 0.47 Δ CIO- TO-GND Variation of input capacitance GND Pin = 0 V, f = 1 MHz, VBIAS = 2.5 V, Channel x pin to GND – channel y pin to GND 0.05 0.07 pF www.ti.com TPD1E05U06, TPD4E05U06, TPD6E05U06 SLVSBO7M – DECEMBER 2012 – REVISED DECEMBER 2021 Copyright © 2021 Texas Instruments Incorporated Submit Document Feedback 7 Product Folder Links: TPD1E05U06 TPD4E05U06 TPD6E05U06
6.4 Electrical Characteristics (continued)
over operating free-air temperature range (unless otherwise noted) PARAMETER TEST CONDITION MIN TYP MAX UNIT CCROS S Channel to channel input capacitance GND Pin = 0 V, f = 1 MHz, VBIAS = 2.5 V, between channel pins 0.01 0.06 pF (1) Transition line pulse with 100 ns width, 200 ps rise time. (2) Extraction of RDYN using least squares fit of TLP characteristics between I = 10 A and I = 20 A. (3) Capacitance data is taken at 25°C. TPD1E05U06, TPD4E05U06, TPD6E05U06 SLVSBO7M – DECEMBER 2012 – REVISED DECEMBER 2021 www.ti.com
8 Submit Document Feedback Copyright © 2021 Texas Instruments Incorporated
Product Folder Links: TPD1E05U06 TPD4E05U06 TPD6E05U06
6.5 Typical Characteristics
±1.0 ±0.8 ±0.6 ±0.4 ±0.2 0.0 0.2 0.4 0.6 0.8 1.0 ±2 ±1 0 1 2 3 4 5 6 7 8 9 10 Current (mA) Voltage (V) C001 Figure 6-1. DC Voltage Sweep I-V Curve 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 ±5 0 5 10 15 20 25 30 35 40 45 50 Power (W) Current (A) Time ( Current Power C002 Figure 6-2. Surge Curve (tp = 8/20 μs), Pin IO to GND 0 5 10 15 20 25 30 35 40 Current (A) Voltage (V) C003 Figure 6-3. Positive TLP Plot IO to GND 0 5 10 15 20 25 Current (A) Voltage (V) C008 Figure 6-4. Negative TLP Plot IO to GND 100 150 200 250 300 ±40 ±20 0 20 40 60 80 100 120 Current (pA) Temperature (C) C004 Figure 6-5. Leakage vs Temperature ±10 0 25 50 75 100 125 150 175 200 Voltage (V) Time (ns) C005 Figure 6-6. 8-kV IEC Waveform www.ti.com TPD1E05U06, TPD4E05U06, TPD6E05U06 SLVSBO7M – DECEMBER 2012 – REVISED DECEMBER 2021 Copyright © 2021 Texas Instruments Incorporated Submit Document Feedback 9 Product Folder Links: TPD1E05U06 TPD4E05U06 TPD6E05U06
6.5 Typical Characteristics (continued)
±90 ±80 ±70 ±60 ±50 ±40 ±30 ±20 ±10 0 25 50 75 100 125 150 175 200 Voltage (V) Time (ns) C006 Figure 6-7. –8-kV IEC Waveform ±12 ±11 ±10 100k 1M 10M 100M 1000M 10000M Insertion Loss (dB) Frequency (Hz) C007 1G 10G Figure 6-8. TPD1E05U06 Insertion Loss 100k 1M 10M 100M 1000M 10000M Insertion Loss (dB) Frequency (Hz) C009 1G 10G Figure 6-9. TPD4E05U06 Insertion Loss 100k 1M 10M 100M 1000M 10000M Insertion Loss (dB) Frequency (Hz) C010 1G 10G Figure 6-10. TPD6E05U06 Insertion Loss TPD1E05U06, TPD4E05U06, TPD6E05U06 SLVSBO7M – DECEMBER 2012 – REVISED DECEMBER 2021 www.ti.com
10 Submit Document Feedback Copyright © 2021 Texas Instruments Incorporated
Product Folder Links: TPD1E05U06 TPD4E05U06 TPD6E05U06
7 Detailed Description
7.1 Overview
The TPDxE05U06 is a family of unidirectional Transient Voltage Suppressor (TVS) based Electrostatic Discharge (ESD) protection diodes with ultra-low capacitance. Each device can dissipate ESD strikes above the maximum level specified by the IEC 61000-4-2 international standard. The TPDxE05U06s ultra-low loading capacitance makes it ideal for protecting any high-speed signal pins.
7.2 Functional Block Diagram
Figure 7-1. TPD1E05U06 Block Diagram D1+ D1- D2+ D2- GND Figure 7-2. TPD4E05U06 Block Diagram D1+ D1- D2+ D2- GND D3+ D3- Figure 7-3. TPD6E05U06 Block Diagram www.ti.com TPD1E05U06, TPD4E05U06, TPD6E05U06 SLVSBO7M – DECEMBER 2012 – REVISED DECEMBER 2021 Copyright © 2021 Texas Instruments Incorporated Submit Document Feedback 11 Product Folder Links: TPD1E05U06 TPD4E05U06 TPD6E05U06
7.3 Feature Description
The TPDxE05U06 is a family of unidirectional Transient Voltage Suppressor (TVS) Electrostatic Discharge (ESD) protection diodes with ultra-low capacitance. Each device can dissipate ESD strikes above the maximum level specified by the IEC 61000-4-2 international standard. The TPDxE05U06s ultra-low loading capacitance makes it ideal for protecting any high-speed signal pins. 7.3.1 ±15-kV IEC61000-4-2 Level 4 ESD Protection The I/O pins can withstand ESD events up to ±12-kV contact and ±15-kV air. An ESD-surge clamp diverts the current to ground.
7.3.2 IEC61000-4-4 EFT Protection
The I/O pins can withstand an electrical fast transient burst of up to 80 A (5/50 ns waveform, 4 kV with 50- Ω impedance). An ESD-surge clamp diverts the current to ground. This has been validated on the TPD4E05U06 only.
7.3.3 IEC61000-4-5 Surge Protection
The I/O pins can withstand surge events up to 2.5 A and 40 W (8/20 µs waveform). An ESD-surge clamp diverts this current to ground.
7.3.4 I/O Capacitance
The capacitance between each I/O pin to ground is 0.42 pF (TPD1E05U06), 0.5 pF (TPD4E05U06) or 0.47 pF (TPD6E05U06). These devices support data rates up to 6 Gbps.
7.3.5 DC Breakdown Voltage
The DC breakdown voltage of each I/O pin is a minimum of 6.5 V. This ensures that sensitive equipment is protected from surges above the reverse standoff voltage of 5.5 V.
7.3.6 Ultra-Low Leakage Current
The I/O pins feature an ultra-low leakage current of 10 nA (maximum) with a bias of 2.5 V.
7.3.7 Low ESD Clamping Voltage
The I/O pins feature an ESD clamp that is capable of clamping the voltage to 10 V (IPP = 1 A).
7.3.8 Industrial Temperature Range
This device features an industrial operating range of –40°C to +125°C.
7.3.9 Easy Flow-Through Routing
The layout of this device makes it simple and easy to add protection to an existing layout. The packages offers flow-through routing, requiring minimal modification to an existing layout.
7.4 Device Functional Modes
The TPDxE05U06 is a passive integrated circuit that triggers when voltages are above VBR or below the lower diodes V f (–0.6 V). During ESD events, voltages as high as ±15 kV (air) can be directed to ground via the internal diode network. When the voltages on the protected line fall below the trigger levels of TPDxE05U06 (usually within 10s of nano-seconds) the device reverts to passive. TPD1E05U06, TPD4E05U06, TPD6E05U06 SLVSBO7M – DECEMBER 2012 – REVISED DECEMBER 2021 www.ti.com
12 Submit Document Feedback Copyright © 2021 Texas Instruments Incorporated
Product Folder Links: TPD1E05U06 TPD4E05U06 TPD6E05U06
8 Application and Implementation
Information in the following applications sections is not part of the TI component specification, and TI does not warrant its accuracy or completeness. TI’s customers are responsible for determining suitability of components for their purposes, as well as validating and testing their design implementation to confirm system functionality.
8.1 Application Information
The TPDxE05U06 is a diode type TVS which is typically used to provide a path to ground for dissipating ESD events on hi-speed signal lines between a human interface connector and a system. As the current from ESD passes through the TVS, only a small voltage drop is present across the diode. This is the voltage presented to the protected IC. The low R DYN of the triggered TVS holds this voltage, V CLAMP, to a safe level for the protected IC.
8.2 Typical Applications
8.2.1 HDMI 2.0 Application HOT PLUG 1 UTILITY 2 TMDS D2+ 3 TMDS_GND 4 TMDS D2- 5 TMDS D1+ 6 TMDS_GND 7 TMDS D1- 8 TMDS D0+ 9 TMDS_GND 10 TMDS D0- 11 TMDS CLK+ 12 TMDS_GND 13 TMDS CLK- 14 CEC 15 DDC/CEC GND 16 SCL 17 SDA 18 P 5V0 19 GND 20 HDMI Connector 5 6 5 6 CEC_CON SCL_CON SDA_CON EN 5V_CON HPD_CON UTI_CON GND HPD_SYS 5V_SYS VCCA SDA_SYS SCL_SYS CEC_SYS UTI_CON D2+ D2- D1+ D1- D0+ D0- CLK+ CLK- 0.1 µF 0.1 µF UTI_CON D2+ D2- D1+ D1- D0+ D0- CLK+ CLK- 5V Source HDMI Controller TPD4E05U06DQA TPD4E05U06DQA TPD5S116YFF Figure 8-1. HDMI 2.0 Schematic www.ti.com TPD1E05U06, TPD4E05U06, TPD6E05U06 SLVSBO7M – DECEMBER 2012 – REVISED DECEMBER 2021 Copyright © 2021 Texas Instruments Incorporated Submit Document Feedback 13 Product Folder Links: TPD1E05U06 TPD4E05U06 TPD6E05U06
8.2.1.1 Design Requirements
For this design example, the two TPD4E05U06 devices, and a TPD5S116 are being used in an HDMI 2.0 application. This provides a complete port protection scheme. Given the HDMI 2.0 application, the parameters listed in Table 8-1 are known. Table 8-1. Design Parameters DESIGN PARAMETER VALUE Signal range on pins 1, 2, 4, or 5 0 V to 5 V Operating frequency 3 GHz
8.2.1.2 Detailed Design Procedure
8.2.1.2.1 Signal Range on Pin 1, 2, 4, or 5
The TPD4E05U06 has 4 identical protection channels for signal lines. The symmetry of the device provides flexibility when selecting which of the 4 I/O channels is going to protect which signal lines. Any I/O supports a signal range of 0 to 5.5 V.
8.2.1.3 Application Curves
Figure 8-2. 3.4-Gbps HDMI 1.4 TP1 Eye Diagram Unpopulated EVM Figure 8-3. 3.4-Gbps HDMI 1.4 TP1 Eye Diagram TPD1E05U06 Figure 8-4. 3.4-Gbps HDMI 1.4 TP1 Eye Diagram TPD4E05U06 Figure 8-5. 3.4-Gbps HDMI 1.4 TP1 Eye Diagram TPD6E05U06 Figure 8-6. 6-Gbps HDMI 2.0 (TP1) Eye Diagram Unpopulated EVM Figure 8-7. 6-Gbps HDMI 2.0 (TP1) Eye Diagram TPD1E05U06 TPD1E05U06, TPD4E05U06, TPD6E05U06 SLVSBO7M – DECEMBER 2012 – REVISED DECEMBER 2021 www.ti.com
14 Submit Document Feedback Copyright © 2021 Texas Instruments Incorporated
Product Folder Links: TPD1E05U06 TPD4E05U06 TPD6E05U06
8.2.2.1 Design Requirements
For this design example, the TPD1E05U06 and the TPD5S116 are used to protect the data pairs and control lines of the HDMI 2.0 connection. This provides full HDMI 2.0 port protection. Given the HDMI 2.0 application, the following parameters in Table 8-2 are known. Table 8-2. Design Parameters DESIGN PARAMETER VALUE Signal range on data lines 0 V to 5 V Operating frequency 3 GHz
8.2.2.2 Detailed Design Procedure
8.2.2.2.1 Signal Range
The TPD1E05U06 has 1 protection channel for signal lines, supporting a signal range of 0 V to 5.5 V.
8.2.2.2.2 Operating Frequency
The TPD1E05U06 has 0.42 pF of capacitance, which supports HDMI 2.0 data rates.
8.2.2.3 Application Curves
Refer to the Section 8.2.1.3 section.
9 Power Supply Recommendations
This device is a passive ESD protection device and there is no need to power it. Care must be taken to make sure that the maximum voltage specifications for each line are not violated. TPD1E05U06, TPD4E05U06, TPD6E05U06 SLVSBO7M – DECEMBER 2012 – REVISED DECEMBER 2021 www.ti.com
16 Submit Document Feedback Copyright © 2021 Texas Instruments Incorporated
Product Folder Links: TPD1E05U06 TPD4E05U06 TPD6E05U06
10 Layout
10.1 Layout Guidelines
- The optimum placement is as close to the connector as possible. – EMI during an ESD event can couple from the trace being struck to other nearby unprotected traces, resulting in early system failures. – The PCB designer needs to minimize the possibility of EMI coupling by keeping any unprotected traces away from the protected traces which are between the TVS and the connector.
- Route the protected traces as straight as possible.
- Eliminate any sharp corners on the protected traces between the TVS and the connector by using rounded corners with the largest radii possible. – Electric fields tend to build up on corners, increasing EMI coupling.
10.2 Layout Example
10.2.1 TPD4E05U06 Layout Example
This application is typical of an HDMI 1.4 layout. VIA to GND Plane D2+D2- D1+D1- D0+D0- Clk+Clk- D1- D1+ D0+D0- NC NC NC NC GND GNDNC NC NC NC GNDNC NC NC NC D1- D1+ D0+D0-GND Figure 10-1. TPD4E05U06 Layout www.ti.com TPD1E05U06, TPD4E05U06, TPD6E05U06 SLVSBO7M – DECEMBER 2012 – REVISED DECEMBER 2021 Copyright © 2021 Texas Instruments Incorporated Submit Document Feedback 17 Product Folder Links: TPD1E05U06 TPD4E05U06 TPD6E05U06
10.2.2 TPD1E05U06 Layout Example
This application is typical of an HDMI 2.0 layout. Clk+ Clk-D0+ D0-D1+ D1-D2+ D2- VIA to GND Plane I/OGND I/OGND I/OGND I/OGND I/O GNDI/O GND I/O GNDI/O GND I/O GNDI/O GND I/O GNDI/O GND Figure 10-2. TPD1E05U06 Layout TPD1E05U06, TPD4E05U06, TPD6E05U06 SLVSBO7M – DECEMBER 2012 – REVISED DECEMBER 2021 www.ti.com
18 Submit Document Feedback Copyright © 2021 Texas Instruments Incorporated
Product Folder Links: TPD1E05U06 TPD4E05U06 TPD6E05U06
11 Device and Documentation Support
11.1 Documentation Support
11.1.1 Related Documentation
For related documentation, see the following:
- Texas Instruments, Reading and Understanding an ESD Protection data sheet
- Texas Instruments, ESD Layout Guide application reports
- Texas Instruments, TPD6E05U06RVZ EVM user's guide
- Texas Instruments, Picking ESD Diodes for Ultra High-Speed Data Lines application reports
- Texas Instruments, ESD PROTECTION DIODES EVM user's guide
- Texas Instruments, TPD1E05U06DPY EVM user's guide
- Texas Instruments, TPD4E05U06DQA EVM user's guide
- Texas Instruments, Generic ESD Evaluation Module user's guide
11.2 Receiving Notification of Documentation Updates
To receive notification of documentation updates, navigate to the device product folder on ti.com. Click on Subscribe to updates to register and receive a weekly digest of any product information that has changed. For change details, review the revision history included in any revised document.
11.3 Support Resources
TI E2E™ support forums are an engineer's go-to source for fast, verified answers and design help — straight from the experts. Search existing answers or ask your own question to get the quick design help you need. Linked content is provided "AS IS" by the respective contributors. They do not constitute TI specifications and do not necessarily reflect TI's views; see TI's Terms of Use.
11.4 Trademarks
TI E2E™ is a trademark of Texas Instruments. PCI-express® and PCI-Express® are registered trademarks of PCI-SIG . V-by-One® are registered trademarks of Thine Electronics, Inc. All trademarks are the property of their respective owners.
11.5 Electrostatic Discharge Caution
This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with appropriate precautions. Failure to observe proper handling and installation procedures can cause damage. ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more susceptible to damage because very small parametric changes could cause the device not to meet its published specifications.
11.6 Glossary
TI Glossary This glossary lists and explains terms, acronyms, and definitions.
12 Mechanical, Packaging, and Orderable Information
The following pages include mechanical, packaging, and orderable information. This information is the most current data available for the designated devices. This data is subject to change without notice and revision of this document. For browser-based versions of this data sheet, refer to the left-hand navigation. www.ti.com TPD1E05U06, TPD4E05U06, TPD6E05U06 SLVSBO7M – DECEMBER 2012 – REVISED DECEMBER 2021 Copyright © 2021 Texas Instruments Incorporated Submit Document Feedback 19 Product Folder Links: TPD1E05U06 TPD4E05U06 TPD6E05U06
www.ti.com 5-Jan-2022 Addendum-Page 1 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Drawing Pins Package Qty Eco Plan (2) Lead finish/ Ball material (6) MSL Peak Temp (3) Op Temp (°C) Device Marking (4/5) Samples PTPD1E05U06DYAR ACTIVE SOT-5X3 DYA 2 3000 TBD Call TI Call TI -40 to 125 TPD1E05U06DPYR ACTIVE X1SON DPY 2 10000 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 125 (BK, C1, C6) TPD1E05U06DPYT ACTIVE X1SON DPY 2 250 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 125 (BK, C1, C6) TPD4E05U06DQAR ACTIVE USON DQA 10 3000 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 125 (BLG, BRG) BRY TPD6E05U06RVZR ACTIVE USON RVZ 14 3000 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 125 (BV, BVY) (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may reference these types of products as "Pb-Free". RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption. Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of <=1000ppm threshold. Antimony trioxide based flame retardants must also meet the <=1000ppm threshold requirement. (3) MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. (4) There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device. (5) Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation of the previous line and the two combined represent the entire Device Marking for that device. (6) Lead finish/Ball material - Orderable Devices may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead finish/Ball material values may wrap to two lines if the finish value exceeds the maximum column width.
www.ti.com 5-Jan-2022 Addendum-Page 2 Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. OTHER QUALIFIED VERSIONS OF TPD1E05U06, TPD4E05U06 :
- Automotive : TPD1E05U06-Q1 , TPD4E05U06-Q1 NOTE: Qualified Version Definitions:
- Automotive - Q100 devices qualified for high-reliability automotive applications targeting zero defects
*All dimensions are nominal Device Package Type Package Drawing Pins SPQ Reel Diameter (mm) Reel Width W1 (mm) (mm) (mm) (mm) (mm) W (mm) Pin1 Quadrant PACKAGE MATERIALS INFORMATION www.ti.com 12-Jan-2022 Pack Materials-Page 1
*All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) TPD1E05U06DPYR X1SON DPY 2 10000 203.2 196.8 33.3 TPD1E05U06DPYR X1SON DPY 2 10000 184.0 184.0 19.0 TPD1E05U06DPYR X1SON DPY 2 10000 189.0 185.0 36.0 TPD1E05U06DPYT X1SON DPY 2 250 184.0 184.0 19.0 TPD1E05U06DPYT X1SON DPY 2 250 203.2 196.8 33.3 TPD4E05U06DQAR USON DQA 10 3000 203.2 196.8 33.3 TPD4E05U06DQAR USON DQA 10 3000 184.0 184.0 19.0 TPD4E05U06DQAR USON DQA 10 3000 189.0 185.0 36.0 TPD6E05U06RVZR USON RVZ 14 3000 189.0 185.0 36.0 TPD6E05U06RVZR USON RVZ 14 3000 184.0 184.0 19.0 PACKAGE MATERIALS INFORMATION www.ti.com 12-Jan-2022 Pack Materials-Page 2
www.ti.com PACKAGE OUTLINE C 1.7 1.5 2X 0.35 0.25 2X 0.4 0.2
0.77 MAX
2X 0.15 0.08 2X 0.3 0.1 0.7
0.5 TYP
B 1.3 1.1 A 0.85 0.75 NOTE 3 SOT (SOD-523) - 0.77 mm max heightDYA0002A PLASTIC SMALL OUTLINE 4224978/B 09/2021 NOTES: 1. All linear dimensions are in millimeters. Any dimensions in parenthesis are for reference only. Dimensioning and tolerancing per ASME Y14.5M. 2. This drawing is subject to change without notice. 3. This dimension does not include mold flash, protrusions, or gate burrs. Mold flash, protrusions, or gate burrs shall not exceed 0.15 mm per side. 4. Reference JEITA SC-79 registration except for package height 1 2 PIN 1 ID AREA SEATING PLANE 0.05 C
0.1 C A B
0.05 SYMM SYMM
www.ti.com EXAMPLE BOARD LAYOUT
0.05 MAX
0.05 MIN
2X (0.4) (R0.05) TYP2X (0.67) (1.48) 4224978/B 09/2021 SOT (SOD-523) - 0.77 mm max heightDYA0002A PLASTIC SMALL OUTLINE NOTES: (continued) 5. Publication IPC-7351 may have alternate designs. 6. Solder mask tolerances between and around signal pads can vary based on board fabrication site. SYMM LAND PATTERN EXAMPLE SCALE:40X SYMM 1 2 SOLDER MASK OPENING METAL UNDER SOLDER MASK SOLDER MASK DEFINED METALSOLDER MASK OPENING NON SOLDER MASK DEFINED (PREFERRED) SOLDERMASK DETAILS
www.ti.com EXAMPLE STENCIL DESIGN 2X (0.67) 2X (0.4) (R0.05) TYP (1.48) SOT (SOD-523) - 0.77 mm max heightDYA0002A PLASTIC SMALL OUTLINE 4224978/B 09/2021 NOTES: (continued) 7. Laser cutting apertures with trapezoidal walls and rounded corners may offer better paste release. IPC-7525 may have alternate design recommendations. 8. Board assembly site may have different recommendations for stencil design. SOLDER PASTE EXAMPLE BASED ON 0.1 mm THICK STENCIL SCALE:40X SYMM SYMM 1 2
www.ti.com PACKAGE OUTLINE C 8X 0.25 0.15 10X 0.43 0.30 4X 0.5
0.55 MAX
0.05 0.00 2X 0.45 0.35 B 1.1 0.9 A 2.6 2.4 (0.13) TYP (R )0.125 USON - 0.55 mm max heightDQA0010A PLASTIC SMALL OUTLINE - NO LEAD 4220328/A 12/2015 PIN 1 INDEX AREA SEATING PLANE 0.08 C 5 6 (OPTIONAL) PIN 1 ID 0.05 C 0.05 NOTES: 1. All linear dimensions are in millimeters. Any dimensions in parenthesis are for reference only. Dimensioning and tolerancing per ASME Y14.5M. 2. This drawing is subject to change without notice. SCALE 6.000
www.ti.com EXAMPLE BOARD LAYOUT
0.07 MIN
0.07 MAX
4X (0.5) (0.835) 8X (0.2) 10X (0.565) (R ) TYP0.05 2X (0.4) USON - 0.55 mm max heightDQA0010A PLASTIC SMALL OUTLINE - NO LEAD 4220328/A 12/2015 SYMM 5 6 SYMM LAND PATTERN EXAMPLE SCALE:30X NOTES: (continued) 3. For more information, see Texas Instruments literature number SLUA271 (www.ti.com/lit/slua271). SOLDER MASK OPENING SOLDER MASK METAL UNDER SOLDER MASK DEFINED METALSOLDER MASK OPENING SOLDER MASK DETAILS NON SOLDER MASK DEFINED (PREFERRED)
www.ti.com EXAMPLE STENCIL DESIGN 8X (0.2) 10X (0.565) 4X (0.5) 2X (0.36) (0.835) (R ) TYP0.05 USON - 0.55 mm max heightDQA0010A PLASTIC SMALL OUTLINE - NO LEAD 4220328/A 12/2015 NOTES: (continued) 4. Laser cutting apertures with trapezoidal walls and rounded corners may offer better paste release. IPC-7525 may have alternate design recommendations. SOLDER PASTE EXAMPLE BASED ON 0.1 mm THICK STENCIL EXPOSED PADS 3 & 8: 90% PRINTED SOLDER COVERAGE BY AREA UNDER PACKAGE SCALE:40X SYMM 5 6 SYMM METAL TYP 3 8
www.ti.com PACKAGE OUTLINE C 0.45 0.30 0.05 0.00 0.65 2X 0.55 0.45 2X 0.3 0.2 A 1.1 0.9 B 0.7 0.5 4224561/B 03/2021 X1SON - 0.45 mm max heightDPY0002A PLASTIC SMALL OUTLINE - NO LEAD PIN 1 INDEX AREA SEATING PLANE 0.08 C 1 2
0.05 C A B
NOTES: 1. All linear dimensions are in millimeters. Any dimensions in parenthesis are for reference only. Dimensioning and tolerancing per ASME Y14.5M 2. This drawing is subject to change without notice. SCALE 11.000
www.ti.com EXAMPLE BOARD LAYOUT ALL AROUND0.07 MAX ALL AROUND (R0.05) TYP (0.7) 2X (0.5) 2X (0.3) 4224561/B 03/2021 X1SON - 0.45 mm max heightDPY0002A PLASTIC SMALL OUTLINE - NO LEAD SYMM 1 2 SYMM LAND PATTERN EXAMPLE EXPOSED METAL SHOWN SCALE:60X NOTES: (continued) 3. For more information, see Texas Instruments literature number SLUA271 (www.ti.com/lit/slua271). 4. Vias are optional depending on application, refer to device data sheet. If any vias are implemented, refer to their locations shown on this view. It is recommended that vias under paste be filled, plugged or tented. SOLDER MASK DETAILS METAL EDGE SOLDER MASK OPENING EXPOSED METAL NON SOLDER MASK DEFINED METAL UNDER SOLDER MASK SOLDER MASK OPENING EXPOSED METAL SOLDER MASK DEFINED (PREFERRED)
www.ti.com EXAMPLE STENCIL DESIGN (R0.05) TYP (0.7) 2X (0.5) 2X (0.3) (0) 4224561/B 03/2021 X1SON - 0.45 mm max heightDPY0002A PLASTIC SMALL OUTLINE - NO LEAD NOTES: (continued) 5. Laser cutting apertures with trapezoidal walls and rounded corners may offer better paste release. IPC-7525 may have alternate design recommendations. SOLDER PASTE EXAMPLE BASED ON 0.1 mm THICK STENCIL SCALE:60X SYMM 1 2 SYMM PCB PAD METAL UNDER SOLDER PASTE
IMPORTANT NOTICE AND DISCLAIMER TI PROVIDES TECHNICAL AND RELIABILITY DATA (INCLUDING DATA SHEETS), DESIGN RESOURCES (INCLUDING REFERENCE DESIGNS), APPLICATION OR OTHER DESIGN ADVICE, WEB TOOLS, SAFETY INFORMATION, AND OTHER RESOURCES “AS IS” AND WITH ALL FAULTS, AND DISCLAIMS ALL WARRANTIES, EXPRESS AND IMPLIED, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY RIGHTS. These resources are intended for skilled developers designing with TI products. You are solely responsible for (1) selecting the appropriate TI products for your application, (2) designing, validating and testing your application, and (3) ensuring your application meets applicable standards, and any other safety, security, regulatory or other requirements. These resources are subject to change without notice. TI grants you permission to use these resources only for development of an application that uses the TI products described in the resource. Other reproduction and display of these resources is prohibited. No license is granted to any other TI intellectual property right or to any third party intellectual property right. TI disclaims responsibility for, and you will fully indemnify TI and its representatives against, any claims, damages, costs, losses, and liabilities arising out of your use of these resources. TI’s products are provided subject to TI’s Terms of Sale or other applicable terms available either on ti.com or provided in conjunction with such TI products. TI’s provision of these resources does not expand or otherwise alter TI’s applicable warranties or warranty disclaimers for TI products. TI objects to and rejects any additional or different terms you may have proposed. IMPORTANT NOTICE Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2022, Texas Instruments Incorporated